Kerala Water Authority

Kerala Water Authority has published Jjm2021- 22 Procurement Of 77 Nos Hot Air Oven Natural Convection Type For Various Quality Control Laboratories Of Kerala Water Authority Jjm 2021-22 Setting Up Upgradation Operation Of Laboratories For Wqms Procurement Of 77 Nos Hot Air Oven Natural Convection Type For Various Quality Control Laboratories Of Kerala Water Authority , Jjm-2021-22-Setting Up / Upgradation / Operation Of Laboratories For Wqm&S- Procurement Of 77 Nos Hot Air Oven Natural Convection Type For Various Quality Control Laboratories Of Kerala Water Authority , Supply And Installation, Validation Including Maintenance During Warranty Of Hot Air Oven Natural Convection Type With The Following Specifications: 1.Pre Heating Chamber And The Interior Side Of The Doors Should Be Made Of Stainless Steel Grade 304 And Outer Housing Should Be Ss/Ms Powder Coated Or Equivalent. Inside Ss 304 Mirror Finish Clear Bottom And Round Corner For Easy Cleaning; 2. Capacity : 100Ltr Minimum; 3. Setting And Working Temperature Range; Ambient Plus 5 Degree C To 300 Degree C; 4. Temperature Variation At 150 Degree C :1.5 Degree C Or Better; 5. Temperature Fluctuation At 150 Degree C : 0.5 Degree C Or Better; 6. Microprocessor Based Auto Tuned Pid Controller With Ce Mark; 7. Lcd/Led Display With Dual Display Of Set Value And Process Value For Precise Control Of Temperature; 8. Should Have Class2 Integrated Independent Temperature Safety Device (Din 12880) With Visual Alarm; 9. Safety Cum Standby Thermostat For Protection From Over Temperature; 10. Heating Time Up To 150 Degree C Not More Than 50 Minutes; 11. Sufficient Heating Elements Shall Be Provided On The Walls Of The Chamber,So As To Achieve Uniform Temperature In The Oven In Minimum Time For The Entire Range Of Temperature Specified ; 12. Should Have Electromechanical Control Of The Exhaust Air Flap; 13. Door Fitted On Heavy Non Corrosive Hinges With Silicon Gasket; 14. To Be Provided With Removable And Adjustable Ss Rod Shelves/ Gi Wire Mesh Trays Which Ensure Uniform Temperature Distribution (Nos- 2Minimum); 15. Supply : 230V, Single Phase, 50/60Hz; 16. Should Have Ip Protection 20 According To En 60529 And Temperature Safety Device Standard According To Din 12880 Certification; 17. Energy Consumption At 150 Degree C Should Be Not More Than 2.5 Kwh; 18. Should Be Glp And Gmp Compliant; 19. Should Have Ce Conformity Marking, Eac,Gs And Ul Certification; 20. Should Provide Nabl Calibration Certificate; 21. Hard Copy Of Instrument Manual With Specification Details Shall Be Submitted; 22. Iq/Oq/Pq Documentation Shall Be Provided; 23.Each Equipment Shall Be Certified By Calibration Laboratory As Per Iso/Iec 17025 At 280 Degree C For 3 Points For Minimum Two Hours.Warranty: 3 Years For The Entire Equipment. Last date of submission for this tender is 2021-11-19. This is a Coats And Jackets tender in Annexure A And B, Kerala