Kerala State Nirmithi Kendra

Kerala State Nirmithi Kendra has published Tender For MLA SDF 2022-23 GHSS ANAKKARA BUILDING COMPLETION-- 1 COMPLETION 2 13.46.1Finishing walls with Acrylic Smooth exterior paint of required shade:New work (Two or more coat applied@ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) 3 11.41.2Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer)with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours andshades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand), including grouting the jointswith white cement and matching pigments etc., complete.Size of Tile 600 x 600 mm. 4 od135518/2023_2024Designing, fabricating, testing, installing and fixing in position Curtain Wall with Aluminium CompositePanel Cladding, with open grooves for linear as well as curvilinear portions of the building , for allheights and all levels etc. including: a) Structural analysis & design and preparation of shop drawingsfor pressure equalisation or rain screen principle as required, proper drainage of water to make itwatertight including checking of all the structural and functional design. b) Providing, fabricating andsupplying and fixing panels of aluminium composite panel cladding in pan shape in metalic colour ofapproved shades made out of 4mm thick aluminium composite panel material consisting of 3mmthick FR grade mineral core sandwiched between two Alumini um sheets (each0.5mm thick).The aluminium composite panel cladding sheet shall be coil coated, with Kynar 500based PVDF /Lumiflon based fluoropolymer resin coating of approved colour and shade on face # 1 and polymer(Service) coating on face # 2 as specified using stainless steel screws, nuts, bolts, washers, cleats,weather silicone sealant, backer rods etc. c) The fastening brackets of Aluminium alloy 6005 T5 /MS with Hot Dip Galvanised with serrations and serrated washers to arrest the wind load movement,fasteners, SS 316 Pins and anchor bolts of approved make in SS 316, Nylon separatorsto prevent bi-metallic contacts all complete required to perform as per specification and drawingThe item includes cost of all material & labour component, the cost of all mock ups at site, cost of allsamples of the individual components for testing in an approved laboratory, field tests on theassembled working curtain wall with aluminium composite panel cladding, cleaning and protection of thecurtain wall with aluminium composite panel cladding till the handing over of the buildingfor occupation. Base frame work for ACP cladding is payable under the relevant aluminium item.sThe Contractor shall provide curtain wall with aluminium composite panel cladding, having all theperformance characteristics all complete , as per the Architectural drawings, as per item description,as specified, as per the approved shop drawings and as directed by the Engineer-inCharge. However, for the purpose of payment, only the actual area on the external face of thecurtain wall with Aluminum Composite Panel Cladding (including width of groove) shall be measuredin sqm. up to two decimal places. 5 od42359/2023_2024Supplying and fitting Stainless Steel (grade 304) 3D Lettering MALAYALAM and english of size 20- 25cm, 30mm projection etc complete as per direction of Engineer incharge at site OD78/21-22 6 Name Board . Last date of submission for this tender is 2024-08-12. This is a Drainage tender in Idukki, Kerala