Kerala State Electricity Board

Kerala State Electricity Board has published Tender For Vi Work At Vannarappara- 1 Erecting one 100kVA Transformer to existing DP and giving connections, incl. loading & unloading, excluding transportation. 2 Transporting Transformers by hired vehicle upto 5km and upto 2 No. of 63 to 250kVA Transformers / RMUs excluding loading & unloading. 3 Fitting and erecting one HT PSC Pole in position incl. fitting cross arm, digging & back filling pit, drawing earth leads. 4 FittingoneAdditional75x40mm,1.8mChannelcrossarminexisting single pole incl. conveyance of materials. 5 Fitting one set AB switch and giving connection 6 FittingoneAdditional2.4m/3mChannelcrossarm(100x50x6mm),in existing 11kV DP incl. conveyance of materials. 7 Drilling hole of various sizes on existing Channel/Cross Arm. 8 Fitting and erecting one HT DP using PSC pole in position incl. fitting 2 channel cross arms, digging & back filling pit, drawing earth leads. 9 Loading HT PSC pole from the stacking place and unloading the same at work site (transport by vehicle). 10 Fitting one Additional V cross arm in existing single pole incl. conveyance of materials. 11 Stringing of one km 11kV line with ACSR Raccoon (3 conductors) incl. cutting and removing tree branches wherever necessary. 12 Transporting poles by hired vehicle to a distance upto 5km and carrying upto 4 poles excluding loading & unloading. 13 Providing one Earth using earth pipe incl. digging & backfilling pit and supply of charcoal, salt, sand etc. 14 InstallingoneDTRMeterwithboxonexistingpolesandgivingthe complete connections incl. conveyance of materials. 15 Fitting one additional Fuse unit and giving connection from Transformer to fuse and DB to LT OH line. 16 ProvidingTransformerfencing,using50x50x6mmAngleiron,40x6 mm MS flat and 8 mm MS rod as specified, incl cost of transportation & foundation 17 Providingyardmetallingwith6mm&40mmthickbluemetalas specified after constructing a curb wall. 18 Fitting and erecting one HT DP using A type pole in position incl. fitting 2 channel cross arms, digging & back filling pit, drawing earth leads. 19 Dismantling and reconnecting Sph service connection from the OH line incl. lowering down the WP portion. 20 Dismantling and reconnecting 3ph service connection from the OH line incl. lowering down the WP portion. 21 Dismantling one ordinary street light/CFL/LED fitting from existing pole and refitting the same on newly erected pole and reconnecting. 22 Loading HT A type pole from the stacking place and unloading the same at work site (transport by vehicle). 23 Providing Strut using LT PSC pole incl. digging & back filling pit. 24 Dismantling (without damage) one LT PSC/RCC Strut pole incl. removal of clamps and stacking. 25 Dismantling (without damage) one LT PSC/RCC pole after disconnecting stays, strut etc. and stacking the same. 26 Dismantling one damaged LT PSC/RCC pole after disconnecting stays, strut etc. and stacking the same. 27 Providingconcretemuffing(0.45x0.45x1.5m)inclusiveofcostofall material (as per specification). 28 Additional rate for excavation of one Pit for HT Pole/HT Stay in Hard Laterite. 29 AdditionalrateforexcavationofonePitforHTPole/HTStayinSoft Rock. 30 Additional rate for excavation of Pit for A type pole in Hard Laterite. 31 AdditionalrateforexcavationofoneEarthPit(2.5mdepth)inHard Laterite. 32 Additional rate for excavation of one Earth Pit (2.5m depth) in Soft Rock. 33 Erecting one LT PSC Pole in position incl. digging & back filling pit. 34 Fitting one additional HT pin with insulator 35 Providing Stay for LT poles incl. digging & back filling pit. 36 Fitting and providing one HT Fly stay for 11kV pole using HT PSC pole incl. digging & back filling pits. 37 Fitting and providing one Strut using HT PSC pole incl. digging & back filling pit. 38 ProvidingoneCoilEarthusingGIearthwire,diggingseparatepitat standard distance away from the pole/structure & backfilling. 39 AdditionalrateforprovidingonediscsetonanytypeofHTpolefor making cut point. 40 Transferring LT Sph 2/3 wire OH line to newly erected HT/LT pole and refitting all items to the new pole. 41 Transferring LT 3ph 4/5 wire OH line to newly erected HT/LT pole and refitting all items to the new pole. 42 Additional rate for excavation of Pit for A type pole in Soft Rock. 43 Fitting6channelcrossarms,ABswitch,DOfuse,LA,HT< connections on existing DP, 3 LT fuses. 44 Additional rate for refitting/redoing one Shackle set and reshackling one span while renewing any type of pole. 45 Pole numbering using printed Aluminium sheets / Painting the surface of pole with anti algal yellow paint and painting Letters with black paint as specified incl. cost of paint. 46 Brickworkincementmortarforsuperstructureasperthedirectionof departmental staff. . Last date of submission for this tender is 2025-01-18. This is a Transformer Supply tender in Kannur, Kerala