Kerala State Electricity Board

Kerala State Electricity Board has published Tender for Vi Work Subrahmanyan Kovil Area - Loading HT PSC pole from the stacking place and unloading the same at work site (transport by vehicle). 2 Additional rate for excavation of one Pit for HT Pole/HT Stay in Hard Laterite. 3 Fitting and providing one Strut using HT PSC pole incl. digging & back filling pit. 4 ProvidingTransformerfencing,using50x50x6mmAngleiron,40x6 mm MS flat and 8 mm MS rod as specified, incl cost of transportation & foundation 5 Providingyardmetallingwith6mm&40mmthickbluemetalas specified after constructing a curb wall. 6 InstallingoneDTRMeterwithboxonexistingpolesandgivingthe complete connections incl. conveyance of materials. 7 Providing one Earth using earth pipe incl. digging & backfilling pit and supply of charcoal, salt, sand etc. 8 AdditionalrateforexcavationofoneEarthPit(2.5mdepth)inHard Laterite. 9 Fitting and providing one HT Stay for 11kV pole incl. digging & back filling pit. 10 Additional rate for excavation of one Pit for HT Pole/HT Stay in Laterite. 11 Transporting poles by hired vehicle to a distance upto 5km and carrying upto 4 poles excluding loading & unloading. 12 Fitting and erecting one HT DP using PSC pole in position incl. fitting 2 channel cross arms, digging & back filling pit, drawing earth leads. 13 Fitting5channelcrossarms,ABswitch,DOfuse,LA,HT< connections on existing DP, 3 LT fuses. 14 Drilling hole of various sizes on existing Channel/Cross Arm. 15 FittingoneAdditional2.4m/3mChannelcrossarm(75x40x6mm),in existing 11kV DP incl. conveyance of materials. 16 Fitting one additional Fuse unit and giving connection from Transformer to fuse and DB to LT OH line. 17 Fittingoneset(3No.)11kVLAandgivingconnectionsexcluding earthing. 18 Fitting and erecting one HT PSC Pole in position incl. fitting cross arm, digging & back filling pit, drawing earth leads. 19 Fitting and erecting one HT A type Pole in position incl. fitting cross arm, digging & back filling pit, drawing earth leads. 20 Loading HT A type pole from the stacking place and unloading the same at work site (transport by vehicle). 21 Additional rate for excavation of Pit for A type pole in Hard Laterite. 22 Pole numbering using printed Aluminium sheets / Painting the surface of pole with anti algal yellow paint and painting Letters with black paint as specified incl. cost of paint. 23 Stringing of 11 kV Aerial bunched cable of size 3 x 120 + 1 x 95 sqmm with bare/insulated Messenger through existing poles 24 TransportingLTABCbyhiredvehicletoadistanceupto5kmand carring up to 2 drum including loading and un loading using crane 25 Fitting one set AB switch and giving connection 26 FittingoneAdditional2.4m/3mChannelcrossarm(100x50x6mm),in existing 11kV DP incl. conveyance of materials. 27 Erection of Anchor clamp / dead end clamp for 11kV ABC of any size 28 ProvidingoneCoilEarthusingGIearthwire,diggingseparatepitat standard distance away from the pole/structure & backfilling. 29 Fiting One no MVT on existing cross arm including 2 nos end termination (for One phase) of any rating for 11 kV AB Cable 30 Erection of suspension clamp for 11KV ABC of any size 31 Dismantling(withoutdamage)onekmLTSph2wireOHline,cross arms, insulators and stacking the conductors in rolls. 32 Erecting one LT PSC Pole in position incl. digging & back filling pit. 33 Loading LT PSC pole from the stacking place and unloading the same at work site (transport by vehicle). 34 Dismantling (without damage) one LT PSC/RCC pole after disconnecting stays, strut etc. and stacking the same. 35 Providing Strut using LT PSC pole incl. digging & back filling pit. 36 Dismantling one damaged LT PSC/RCC pole after disconnecting stays, strut etc. and stacking the same. 37 Transferring LT Sph 2/3 wire OH line to newly erected HT/LT pole and refitting all items to the new pole. 38 Transferring LT 3ph 4/5 wire OH line to newly erected HT/LT pole and refitting all items to the new pole. 39 Providing Stay for LT poles incl. digging & back filling pit. 40 Additional rate for excavation of one Pit for LT Pole/LT Stay in Laterite. 41 AdditionalrateforexcavationofonePitforLTPole/LTStayinHard Laterite. 42 InstallingOneNo.4waySatelliteConnectorofsizeMain:16to95, Tap:4 to 35 Sq.mm to the LT AB cable of Standard size 43 Installation of Insulation piercing connector for main to service line main:16-95 sqmm, Tap 16-95 sqmm 44 Stringing of 1.1 kV Aerial bunched cable of size 3 x 70 + 1 x 16+1x 50 sqmm with bare/insulated Messenger through existing poles 45 Erection of Anchor clamp / dead end clamp for LT ABC of any size 46 Erection of suspension clamp for LT ABC of any size 47 Erecting one 100kVA Transformer to existing DP and giving connections, incl. loading & unloading, excluding transportation. . Last date of submission for this tender is 2024-12-05. This is a Overhead Line tender in Kannur, Kerala