Kerala State Electricity Board

Kerala State Electricity Board has published tender for VI Work at Ariyanthari Temple Parakkadavu inE.S.Kuttiady under Electrical circle, Vadakara- 1 Fitting one set AB switch and giving connection 2 Fitting one Additional 2.4m/3m Channel cross arm (100x50x6mm), in existing 11kV DP incl. conveyance of materials. 3 Drilling hole of various sizes on existing Channel/Cross Arm. 4 Providing one Earth using earth pipe incl. digging & backfilling pit and supply of charcoal, salt, sand etc. 5 Erection of Anchor clamp / dead end clamp for 11kV ABC of any size 6 Fitting and erecting one HT DP using PSC pole in position incl. fitting 2 channel cross arms, digging & back filling pit, drawing earth leads. 7 Loading HT PSC pole from the stacking place and unloading the same at work site (transport by vehicle). 8 Fitting and providing one HT Fly stay for 11kV pole using HT PSC pole incl. digging & back filling pits. 9 Fitting and erecting one HT PSC Pole in position incl. fitting cross arm, digging & back filling pit, drawing earth leads. 10 Fitting and providing one HT Stay for 11kV pole incl. digging & back filling pit. 11 Fitting and providing one Strut using HT PSC pole incl. digging & back filling pit. 12 Providing one Coil Earth using GI earth wire, digging separate pit at standard distance away from the pole/structure & backfilling. 13 Fiting One no MVT on existing cross arm including 2 nos end termination (for One phase) of any rating for 11 kV AB Cable 14 Erection of suspension clamp for 11KV ABC of any size 15 Transporting poles by hired vehicle to a distance upto 5km and carrying upto 4 poles excluding loading & unloading. 16 Stringing of 11 kV Aerial bunched cable of size 3 x 120 + 1 x 95 sqmm with bare/insulated Messenger through existing poles 17 Erecting one 100kVA Transformer to existing DP and giving connections, incl. loading & unloading, excluding transportation. 18 Transporting Transformers by hired vehicle upto 5km and upto 2 No. of 63 to 250kVA Transformers / RMUs excluding loading & unloading. 19 Fitting 5 channel cross arms, AB switch, DO fuse, LA, HT & LT connections on existing DP, 3 LT fuses. 20 Fitting one additional Fuse unit and giving connection from Transformer to fuse and DB to LT OH line. 21 Providing Transformer fencing , using 50x50x6mm Angle iron, 40 x 6 mm MS flat and 8 mm MS rod as specified, incl cost of transportation & foundation 22 Providing yard metalling with 6mm & 40mm thick blue metal as specified after constructing a curb wall. 23 Installing one DTR Meter with box on existing poles and giving the complete connections incl. conveyance of materials. 24 Loading HT A type pole from the stacking place and unloading the same at work site (transport by vehicle). 25 Fitting and erecting one HT A type Pole in position incl. fitting cross arm, digging & back filling pit, drawing earth leads. 26 Fitting and erecting one HT DP using A type pole in position incl. fitting 2 channel cross arms, digging & back filling pit, drawing earth leads. 27 Erection of suspension clamp for LT ABC of any size 28 Erecting one LT PSC Pole in position incl. digging & back filling pit. 29 Loading LT PSC pole from the stacking place and unloading the same at work site (transport by vehicle). 30 Dismantling one damaged LT PSC/RCC pole after disconnecting stays, strut etc. and stacking the same. 31 Dismantling (without damage) one LT PSC/RCC pole after disconnecting stays, strut etc. and stacking the same. 32 Providing Stay for LT poles incl. digging & back filling pit. 33 Providing Strut using LT PSC pole incl. digging & back filling pit. 34 Installing One No. 4 way Satellite Connector of size Main :16 to 95, Tap:4 to 35 Sq.mm to the LT AB cable of Standard size 35 Transporting LT ABC by hired vehicle to a distance up to 5 km and carring up to 2 drum including loading and un loading using crane 36 Stringing of 1.1 kV Aerial bunched cable of size 3 x 70 + 1 x 16+1x 50 sqmm with bare/insulated Messenger through existing poles 37 Dismantling (without damage) one km LT Sph 2 wire OH line, cross arms, insulators and stacking the conductors in rolls. 38 Dismantling (without damage) one km LT 3ph 4 wire OH line, cross arms, insulators and stacking the conductors in rolls. 39 Erection of Anchor clamp / dead end clamp for LT ABC of any size 40 Installation of Pre-insulated straight through joints for 16sqmm cable 41 Installation of Pre-insulated straight through joints for 50sqmm cable 42 Installation of Pre-insulated straight through joints for 70sqmm cable 43 Dismantling and reconnecting Sph service connection from the OH line incl. lowering down the WP portion. 44 Dismantling and reconnecting 3ph service connection from the OH line incl. lowering down the WP portion. . Last date of submission for this tender is 2025-03-15. This is a Temple tender in parakkadavu, Kerala