Kerala State Electricity Board

Kerala State Electricity Board has published Tender For VI WORK AT NELLIKUTTY KOTTAKUNNU ROAD- 1 Transferring LT Sph 2/3 wire OH line to newly erected HT/LT pole and refitting all items to the new pole. 2 Transferring LT 3ph 4/5 wire OH line to newly erected HT/LT pole and refitting all items to the new pole. 3 Dismantling and reconnecting Sph service connection from the OH line incl. lowering down the WP portion. 4 Dismantling and reconnecting 3ph service connection from the OH line incl. lowering down the WP portion. 5 Dismantling one damaged LT PSC/RCC pole after disconnecting stays, strut etc. and stacking the same. 6 Dismantling (without damage) one LT PSC/RCC pole after disconnecting stays, strut etc. and stacking the same. 7 Additional rate for refitting/redoing one Shackle set and reshackling one span while renewing any type of pole. 8 Fitting one No. Section fuse on LT line with dropping cables, crimping sockets, connecting with bolt&nut etc. 9 Dismantling one section fuse 10 Fitting and providing one HT Stay for 11kV pole incl. digging & back filling pit. 11 Stringing of 11 kV Aerial bunched cable of size 3 x 120 + 1 x 95 sqmm with bare/insulated Messenger through existing poles 12 Fitting and providing one Strut using HT PSC pole incl. digging & back filling pit. 13 Loading HT PSC pole from the stacking place and unloading the same at work site (transport by vehicle). 14 Providing one Coil Earth using GI earth wire ,digging separate pit at standard distance away from the pole/structure & backfilling. 15 Erection of Anchor clamp / dead end clamp for 11kV ABC of any size 16 Providing one Earth using earth pipe incl. digging & backfilling pit and supply of charcoal, salt, sand etc. 17 Erection of suspension clamp for 11KV ABC of any size 18 Transporting poles by hired vehicle to a distance upto 5km and carrying upto 4 poles excluding loading & unloading. 19 Fitting one set AB switch and giving connection 20 Drilling hole of various sizes on existing Channel/Cross Arm. 21 Fitting and erecting one HT DP using PSC pole in position incl. fitting 2 channel cross arms, digging & back filling pit, drawing earth leads. 22 FittingoneAdditional2.4m/3mChannelcrossarm(100x50x6mm),in existing 11kV DP incl. conveyance of materials. 23 Doing straight joint on cables of sizes upto and incl. 3x185 sqmm using the cable jointing kit supplied departmentally as per specification. 24 Fitting and providing one HT Fly stay for 11kV pole using HT PSC pole incl. digging & back filling pits. 25 Fitting and erecting one HT PSC Pole in position incl. fitting cross arm, digging & back filling pit, drawing earth leads. 26 Pole numbering using printed Aluminium sheets / Painting the surface of pole with anti algal yellow paint and painting Letters with black paint as specified incl. cost of paint. 27 Erecting one LT PSC Pole in position incl. digging & back filling pit. 28 Providing Stay for LT poles incl. digging & back filling pit. 29 Fitting and erecting one HT A type Pole in position incl. fitting cross arm, digging & back filling pit, drawing earth leads. 30 Loading HT A type pole from the stacking place and unloading the same at work site (transport by vehicle). 31 Providing concrete muffing(0.45x0.45x1.5m)inclusive of costofall material (as per specification). 32 Fitting and erecting one HT DP using A type pole in position incl. fitting 2 channel cross arms, digging & back filling pit, drawing earth leads. 33 Fiting One no MV Ton existing cross arm excluding termination work (for One phase) of any rating for 11 kV AB Cable 34 Doing one cable end termination on HT ABC of sizes Up to 3x150+1x120 sqmm 35 Fitting 5 channel cross arms,AB switch, DOf use,LA,HT< connections on existing DP, 3 LT fuses. 36 Fitting one Additional V cross arm in existing single pole incl. conveyance of materials. 37 Fitting one Additional 75x4 0mm,1.8m Channel cross arm in existing single pole incl. conveyance of materials. 38 erection and commissioning of street light metering with timer 39 Providing Transformer fencing, using 50x50x6mm Angle iron,40x6 mm MS flat and 8 mm MS rod as specified, incl cost of transportation & foundation 40 Providing yard metalling with 6mm&40mm thick blue metalas specified after constructing a curb wall. 41 Brick work in cement mortar for super structure as per the direction of departmental staff. 42 Installing one DTR Meter with box on existing poles and givingthe complete connections incl. conveyance of materials. 43 Erecting one 100kVA Transformer to existing DP and giving connections, incl. loading & unloading, excluding transportation. 44 Transporting Transformers by hired vehicle upto 5km and upto 2 No. of 63 to 250kVA Transformers / RMUs excluding loading & unloading. . Last date of submission for this tender is 2024-12-05. This is a Road Work tender in Kannur, Kerala