Kerala State Electricity Board

Kerala State Electricity Board has published Tender For VI WORK AT CHOYIMADAMUNDER ES-KUTTIYADI[CW-6629-202425-42]- 1 Providing Strut using LT PSCpole incl. digging & backfilling pit. 2 Loading LT PSC pole fromthe stacking place andunloading the same at worksite (transport by vehicle). 3 Providing Fly stay for LTpole using LT PSC pole incl.digging & back filling pit. 4 Providing Stay for LT polesincl. digging & back fillingPit. 5 Installation of Insulationpiercing connector for mainto service line main :16-95sqmm, Tap 16-95 sqmm 6 Erection of Anchor clamp /dead end clamp for LT ABCof any size 7 Erection of suspension clampfor LT ABC of any size 8 Transporting LT ABC byhired vehicle to a distance upto 5 km and carring up to 2drum including loading andun loading using crane 9 Stringing of 1.1 kV Aerialbunched cable of size 3 x 70+ 1 x 16+1x 50 sqmm withbare/insulated Messengerthrough existing poles 10 Dismantling (withoutdamage) one km LT 3ph 4wire OH line, cross arms,insulators and stacking theconductors in rolls. 11 Dismantling (withoutdamage) one km LT Sph 2wire OH line, cross arms,insulators and stacking theconductors in rolls. 12 Fitting one No. Section fuseon LT line with droppingcables, crimping sockets,connecting with bolt&nut etc. 13 Erection of LT 2 waydistribution box on existingcross arm giving connectionincl. cable and earthconnection (excludingEarthing). 14 Providing concrete muffing(0.45x0.45x1.5m) inclusiveof cost of all material (as perSpecification). 15 Fitting one Additional75x40mm, 1.8m Channelcross arm in existing singlepole incl. conveyance ofMaterials. 16 Fitting and providing one HTStay for 11kV pole incl.digging & back filling pit. 17 Drilling hole of various sizeson existing Channel/CrossArm. 18 Fitting one additional Fuseunit and giving connectionfrom Transformer to fuse andDB to LT OH line. 19 Providing Transformerfencing , using 50x50x6mmAngle iron, 40 x 6 mm MSflat and 8 mm MS rod asspecified, incl cost of transportation & foundation 20 Providing yard metalling with6mm & 40mm thick bluemetal as specified afterconstructing a curb wall. 21 Providing one Earth usingearth pipe incl. digging &backfilling pit and supply ofcharcoal, salt, sand etc. 22 Fitting one Additional2.4m/3m Channel cross arm(100x50x6mm), in existing11kV DP incl. conveyance ofMaterials. 23 Transporting poles by hiredvehicle to a distance upto5km and carrying upto 4poles excluding loading &Unloading. 24 Stringing of 11 kV Aerialbunched cable of size 3 x 120+ 1 x 95 sqmm withbare/insulated Messengerthrough existing poles 25 Fiting One no MVT onexisting cross arm including 2nos end termination (for Onephase) of any rating for 11 kVAB Cable 26 Fiting One no MVT onexisting cross arm excludingtermination work (for Onephase) of any rating for 11 kVAB Cable 27 Erection of Anchor clamp /dead end clamp for 11kVABC of any size 28 Erection of suspension clampfor 11KV ABC of any size 29 Dismantling and reconnecting3ph service connection fromthe OH line incl. loweringdown the WP portion. 30 Loading HT PSC pole fromthe stacking place andunloading the same at worksite (transport by vehicle). 31 Fitting and erecting one HTPSC Pole in position incl.fitting cross arm, digging &back filling pit, drawing earthLeads. 32 Dismantling and reconnectingSph service connection fromthe OH line incl. loweringdown the WP portion 33 Transferring LT Sph 2/3 wireOH line to newly erectedHT/LT pole and refitting allitems to the new pole. 34 Transferring LT 3ph 4/5 wireOH line to newly erectedHT/LT pole and refitting allitems to the new pole. 35 Insertion of one LT PSC polein existing 3ph OH line incl.digging & back filling pit,fitting cross arm, insulator,binding etc. 36 Erecting one LT PSC Pole inposition incl. digging & backfilling pit. 37 Dismantling one damaged LTPSC/RCC pole afterdisconnecting stays, strut etc.and stacking the same 38 Dismantling (without damage) one LT PSC/RCCpole after disconnecting stays,strut etc. and stacking theSame. 39 Installation of Insulationpiercing connector for mainto service line main :16-95sqmm, Tap : 4-35 sqmm 40 Installing One No. 4 waySatellite Connector of sizeMain :16 to 95, Tap:4 to 35Sq.mm to the LT AB cable ofStandard size 41 Erecting one 100kVATransformer to existing DPand giving connections, incl.loading & unloading,excluding transportation. 42 Transporting Transformers byhired vehicle upto 5km andupto 2 No. of 63 to 250kVATransformers / RMUsexcluding loading &Unloading. 43 Installing one DTR Meterwith box on existing polesand giving the completeconnections incl. conveyanceof materials. 44 Fitting and erecting one HTDP using PSC pole inposition incl. fitting 2 channelcross arms, digging & backfilling pit, drawing earthLeads. 45 Fitting 5 channel cross arms,AB switch, DO fuse, LA, HT& LT connections on existingDP, 3 LT fuses. 46 Fitting one set (3No.) 11kVLA and giving connectionsexcluding earthing. . Last date of submission for this tender is 2024-11-26. This is a Electrification Work tender in vadakara, Kerala