Kerala State Council For Science Technology And Environment

Kerala State Council For Science Technology And Environment has published Supply Of Gel Electrophoresis With Power Pack , Gel Electrophoresis With Power Pack , Technical Specifications • The Horizontal Electrophoresis Unit Must Include 10X10cm Tray. • Gel Trays Should Be Uv Transparent. • Lid And Cables Should Be Separate And Must Not Be Attached. • Bromophenol Blue Migration Should Be Approx 4-5Cm / H At 90V. • Run Time Should Be 45-60 Min At 90. • 1 Mm Thick 2 Combs Of 16 Sample Wells Should Be Included. • Buffer Volume Should Not Be More Than 300Ml. • Tank Of The System Should Be Single Moulded To Ensure Leak Proof Buffer Tank. Even The Parts Should Also Be Single Molded That Are Easy To Repair And Replace. • 16 Sample Combs Should Have 16 ?L Sample Capacity In Each Well. • The Electrodes Should Not Be Attached To The Tank And Should Be Cassette Type Electrodes For Easy Repair And Replacement. • Should Have Pure Platinum Wire And Gold Plated Corrosion Resistant Electrodes. • Should Include Casting Dams For Tape Free Casting Of Gels. • Should Include Loading Guides For Easy Identification Of Wells. • Should Have Color Coded Combs Option And Should Have Options For 0.75Mm, 1Mm, 1.5Mm And 2Mm Combs. • It Should Support Widest Range Of Combs To Run Up To 100 Samples. • The Unit Must Have Safety Requirements For Electrical Equipment For Measurement, Control, And • Laboratory Use – Part 1: En61010-1: 2001, General Requirements Following The Provisions Of • Directives 73 / 23 / Eec ( Low Voltage ) And 89 / 336 / Eec ( Emc ) As Amended By 93 / 68 / Eec ( Ce Marking ) . Power Supply:- • The Power Supply Should Have 300V, 400Ma And 60W With 1V / 1Ma Resolution. • The Output Of The Power Supply Should Be Constant Voltage Or Constant Current. • The System Should Have Timer For 1-999 Mins With Alarm. • Should Have 3-Digit Led. • The Power Supply Should Have Provision To Connect Two Gel Chambers. • Should Have Alarm Function. • Should Have Microprocessor Control. • The System Should Have Auto Cut-Off Function. • Safety Features Includes Shrouded Plugs And Sockets, No Load Detection, Overload Detection, Overvoltage, Current & Temperature Protection, And Maximum Power Output Detection. • The Unit Should Have En-61010-1 & Ce Regulatory Conformity. • Operating Conditions Should Be Ambient - 40°C, =95% Humidity. • Operating Conditions Should Be 100-240 Vac. • The Power Pack Dimensions Should Not Be More Than 140X191x84mm ( Wxdxh ) . • Weight Of The Power Pack Should Not Be More Than 1 Kg. • The Unit Must Have Safety Requirements For Electrical Equipment For Measurement, Control, And • Laboratory Use – Part 1: En61010-1: 2001, General Requirements Following The Provisions Of • Directives 73 / 23 / Eec ( Low Voltage ) And 89 / 336 / Eec ( Emc ) As Amended By 93 / 68 / Eec ( Ce Marking ) . • Vendor Should Be Having Service Facility At Kerala, Service Centre Address To Be Furnished. • Warranty: 1 Year With Periodic Preventive Inspection Every 3 Months During The Warranty Period. Vendor Should Be Provided Specific Manufacturer Authorization Certificate.. Last date of submission for this tender is 2022-02-07. This is a Tape Supply tender in Peechi, Kerala