Kerala Small Industries Development Corporation Limited

Kerala Small Industries Development Corporation Limited has published E Tender For The Partition Work At Mancombu , Alappuzha E Tender For The Partition Work At Mancombu , Alappuzha , Partly Glaced Double Skin Partition (Both Sides Laminates) Providing And Fixing Full Height Partly Glazed Double Skin Cabin Partition At Three Locations(Gf & Ff) As Per The Drawing, Structure Made O F 3X 0.75 Mr303 Grade Plywood At 60Cm X 60Cm Grid (Horizontally And Vertically) Fixed To Floor, Wall , Ceillng . Both Sides Of Panelling Fitted With 8 Mm Mr 303 Grade Plywood Finished With 0.8Mm Laminates On Both Dises Of Approved Shade Using Adequate Bonding Agent ,Portion Of The Partition Fitted With4mmfloat Glass At Apropriate Height In Etched Design, Wooden Beading In Finished Shall Be Used Outer Area Of The Glass. Scope Of The Work Includes Providing And Fixing 3 Nos Partition Doors In Same Shade Of Partition Made With All Necessary Hardwares Such As Lock, Hinges, Aldrops Etc., The Work Is To Be Completed All Labour And Material Including All The Hardware Required. Partition Size:- Gf1-3+2.7M Gf-2- 3+2.7Mff-6.3X3m , Low Height Storage At Lab Providing & Fixing Low Height Storoge (60 Cm Depth 75Cm Height) Box, Shelves And Door Shutter Made Of 19 Mm Thick Mr 303 Grade Plywood Ond Top Fitted By Polished Granite Stone, Door Shutters And All Exposed Sides Finished With .8Mm Thick Lamination Of Approved Colour & Pattern As Directed By Engineer In Charge And Detailed Drawing (If Any). Provide Ss Grade Slow Closing Type Auto Hinges For All Door Shutters. Fix 4Inch Ss Grade Handle , Multi Type Lock All Door Shutters. Ss Tower Bolt Inside As Per The Design Provide Appropriate Number Of Shelves As Per The Client Requirement . All Exposed Edges Finished With Hard Wood Beading Of Melamine Clear Matt Finish. All Inside Portions To Be Painted With,Primer And 2 Coats Of Enamel Paint Of Approved Colour And Pattern As Per Design. Total Length 11.95M , Spring Door With Partitionproviding And Fixing Of 1.2M Wide And 2Mheight10 Mm Toughened Spring Glass Door With All Required Hardware Ie, Bottom Spring Fittings,24 Inch Long Handle At Both Side, Lock And Top Pivot Fittings, Remaining 30 Cm Open Area To Be Closed With 10Mm Fixed Toughned Glass Works Using Hard Wood Battern Or Aluminium Post Door Spring Make : Ebco, Ozon, Godrej , Facade Glass Clading Works (Three Shelves ) Supply And Erection Of Galss Cladding Works At Three Levels , Providing And Fixing Fully Glazed Cladding Works As Per The Drawing , Fitted On 2.5X1.5 Inch Powder Coated Aluminium Channel ,5Mm Colored Portion Of Glass Panel Fixed With Spacer Tape And Sealant , One Portion Of Glass Panel At Each Levels Fitted With Hinges To Open Upright Position Of Service Purpose . The Work Is To Be Completed With All Labour And Material Including All The Hardware Required. , Storage Shelf (2 Nos.) 1.2 M Wide X 2.1 M Height And .45 M Depth Storage Shelf Made Of 19 Mm Mr 303 Grade Plywood Finished With 0.8 Mm Thick Laminates , Bottom Portion At 75Cm Height Fitted With Door Shutters And Remaining Upper Portion Of 1.25 M Left As Open Type Shelf , Door Shutters Are Fitted With Slow Closing Type Auto Hinges , Multi Type Lock And 4 Inch Long Handle. , Bath Towel (Cotton). Last date of submission for this tender is 2022-02-24. This is a Coats And Jackets tender in Alappuzha, Kerala