Kerala Paper Products Limited

Kerala Paper Products Limited has published Tender For Sieved Bed Material/Clinker Handling Boilers. - Loading of Seived bed material in boiler from operating floor, spreading and leveling as per the direction of EIC. The contractor has to arrangeman power, if required during odd hours & Sundays/ holidays, if required on emergency. Frequency: As and when required. 2 Transportation of Seived bed material , available in polythene bags, fromground floor to operating floor and coal scale area of boiler houseand stacking it as per the direction of EIC. Frequency: As & when required. 3 Transportation of drained bed material, when boiler is in operation anddrained clinker from boiler area to designatedsieving area as per direction of EIC. Frequency: As and when required. 4 Collecting the bed material in polythene bags from areas wherever necessary for inspection of bed coils, wall tubes or for any other maintenance purpose and keeping the bed material either inside or outside of boiler bed, as per the direction of the EIC. Frequency: Asand when required. 5 Removal ofclinker from boiler 1bed,using suitable methods without causing any damage to the bed coils/side wall tubes and transporting the removed clinker from the boilerto a specified area within 30 meters from ground floor of boiler house. After removal of clinkers, entire bed material and cleaning of nozzle distribution plates , all fluidization nozzles needs to be flushed out with compressed air and all nozzles needs to be pinned. Frequency: As & when required. 6 Removal of clinker and bed material inside furnace (Cross section 6.5m*6m) by engaging suitable manpower.Location of clinker and bed material is between bed coils and fluidization nozzles.Manpower engaged has to lie down between fluidization nozzlesand bed coils and manually pass on clinker pieces to manholes available to be taken out.Bed material can be drained through bed drains.Since job to be executed is in constrained area, manpower engaged has to be physically fit.After removal of clinkers, entire bed material and cleaning of nozzle distribution plates, all fluidization nozzles of 4 compartments/ wind box needs to be flushed out with compressed airand all nozzles need to be pinned (PB# 2). Frequency : As and when required. . Last date of submission for this tender is 2025-09-16. This is a Material Handling Service tender in Kottayam, Kerala