Kerala Minerals And Metals Limited

Kerala Minerals And Metals Limited has published Tender For annual maintenance contract Towards Rewinding/Repairing Of Motors.- 1 Rewinding of LT Motors (AC) of following ratings, as per the scope of work. All winding materials such as winding wires, insulation papers, insulation tapes, cotton tapes, varnish, sleeve, glass lead etc., shall be in the scope of the contractor. However bearings and its replacement is excluded from the scope this contract. After rewinding, the motor shall be checked as per prescribed format and test reports shall be submitted. Rewound motors shall be accepted subject to verification of Test Reports and no load test run at our works for its satisfactory performance. Unit rate shall be inclusive of to & fro transportation after considering the scrap value of removed copper0.18 kW, 4 pole 2 0.37 kW, 4 pole 3 0.55 kW, 6 pole 4 0.55 kW, 4 pole 5 0.75 kW, 6 pole 6 0.75 kW, 4 pole 7 0.75 kW, 2 pole 8 1.1kW,4 pole 9 1.1 kW, 2 pole 10 1.5 kW, 6 pole 11 1.5 kW,4 pole 12 1.5 kW, 2 pole 13 2.2 kW, 6 pole 14 2.2 kW, 4 pole 15 2.2 kW, 2 pole 16 3.7 kW, 6 pole 17 3.7 kW, 4 pole 18 3.7 kW, 2 pole 19 4 kW, 4 pole 20 5.5 kW, 4 pole 21 5.5 kW, 2 pole 22 7.5 kW, 8 pole 23 7.5 kW, 6 pole 24 7.5 kW, 4 pole 25 7.5 kW, 2 pole 26 11 kW, 4 pole 27 11 kW, 2 pole 28 12.5 kW, 2 pole 29 15 kW, 6 pole 30 15 kW, 4 pole 31 15 kW, 2 pole 32 18.5 kW, 4 pole 33 18.5 kW, 2 pole 34 22 kW, 4 pole 35 22 kW,2 pole 36 30 kW, 6 pole 37 30 kW, 4 pole 38 30 kW, 2 pole 39 37 kW, 10 pole 40 37 kW, 6 pole 41 37 kW, 4 pole 42 37 kW, 2 pole 43 45 kW, 4 pole 44 55 kW, 6 pole 45 55 kW, 4 pole 46 75 kW, 4 pole 47 75 kW, 2 pole 48 90 kW, 4 pole 49 90 kW, 6 pole 50 90 kW, 2 pole 51 110 kW, 6 pole 52 110 kW, 4 pole 53 110 kW, 2 pole 54 132 kW, 6 pole 55 132 kW, 4 pole 56 150 kW, 4 pole 57 200 kW, 6 pole 58 200 kW, 8 pole 59 200 kW, 10 pole 60 250 kW, 2 pole 61 Rewinding of brake coils after removal of old winding, new coil to be wound (single wound), insulated, varnished to be placed inside the magnet drum and to be filled with hardener. Lead wires to be sleeved and taken outside the brake coil magnet, with minimum 30 cm length. . Last date of submission for this tender is 2025-01-23. This is a Overhead Line tender in Kollam, Kerala