Grama Panchayat
- AOC value
- ₹12.75L
- AOC date
- 6 Nov
- Completion
- Refer Docs
- L1 bid
- Refer Docs
Timeline
- -Published
- -Closes
- -Bid opens
- 6 Nov 25AOC date
- -Published
- -Closes
- -Bid opens
- 6 Nov 2025AOC date
Important info
- Result ID
- Refer Docs
- Award of contract
- 06/11/2025
- Authority
- Grama Panchayat
- Published
- Refer Docs
- Tender closed
- Refer Docs
- Tender no
- Bidding URL
- Tender
- Bidder details
AOC description
Grama Panchayat has published Tender For Citizen information boards-- 1 Stone Aggregate(single size): 40 mm nominal size 2 Stone Aggregate(single size):20 mm nominal size 3 Coarse sand (zone III) 4 Portland Cement 5 Hire charges of Concrete Mixer 0.25 to 0.40 cum with Hopper 6 Vibrator (Needle type 40 mm) 7 Sundries 8 wall form panel 1250x500 mm 9 Corner angle 45x45x5 mm 1.50 m long 10 100 mm channel shoulder 2.5 m long 11 Double clip (bridge clip) 12 Single clip 13 M.S. Tube 40 mm dia 14 Twisted steel/deformed bars 15 Stone Aggregate(single size): 10 mm nominal size 16 Stone for masonry work 17 Through and bond stone size 24 x 24 x 39cm 18 Structural steel such as tees, angles, channels and R.S. joists 19 Red oxide Zinc chromate primer 20 Adjustable telescopic prop 3 m (2.02-3.75m) 21 Beam clamp 300-380 mm (450-1070 mm) 22 Royalty for good earth 23 Wall form panel 1250x450xmm 24 Corner angle 45x45x5 mm 2.50 long 25 Column clamp 450x1070 mm 26 Prop 2 m (2-3.5m) 27 Adjustable span ESO+SI (2.35-3.40) 28 Solid blocks of size 30x20x20cm 29 Solid blocks of size 30x20x15cm 30 Solid blocks of size 40x20x10cm 31 Fine sand (zone IV) 32 Anjili wood scantls 33 Bright finished or black enameled mild steel butt hinges 100x58x1.90 mm 34 Bright finished or black enameled mild steel butt hinges 50x37x1.50 mm 35 Bright finished or black enameled mild steel screws 40 mm 36 Bright finished or black enameled mild steel screws 20 mm 37 Anjili wood planks 38 Float glass sheet of nominal thickness 4 mm (weight not less than 10 kg/sqm) 39 Mild Steel round bar above 12 mm dia 40 Flats up to 10 mm in thickness 41 Rawl plug 50 mm (designation 10 nos) 42 48 mm X40 mmX1.5 mm thick Factory made door frame of PVC extruded sections in white, grey or wooden finish 43 24 mm thick Factory made shutters with styles, rails and panels of PVC extruded sections in white, grey or wooden finish 44 Ceramic Glazed Tiles Ist quality minimum thickness 5 mm in all colours shades and designs except burgundy, bottle green black 45 Vitrified floor tile 60x60 cm 46 Ceramic Glazed Tiles Ist quality 300 x 300 mm in all shades and designs of White, Ivory, grey, Fume Red brown etc. 47 Water thinnable cement primer for interior wall surface, having VOC content less than 50 gms/litre 48 Plastic emulsion paint 49 Black plastic seat (soild) with lid C.P.brass hinges and rubber buffers 50 Vitreous china pedestal type wate closet 51 Flushing Cistern P.V.C. 10 lts capacity (low level) (white) (with fittings, accessories and flush pipe) 52 One piece European Water Closet S concealed 510 X 295 X 520 mm with seat cover and fittings 53 Vitreous China flat back wash basin 630x450 mm 54 15 mm C.P.brass tap 55 C.P. brass waste 32 mm 56 C.I. bracket for wash basin and sinks 57 Stainless steel kitchen sink - without drain board 470x420 mm bowl depth 178 mm 58 Brass bib-cock-15 mm dia 59 PVC pipe 50 mm outer dia.6kgf/cm2 60 PVC pipe 110 mm outer dia. 4kgf/cm2 61 PVC bend 110 mm dia 62 S.W. gully trap type 100x100 mm 63 C.I. Grating 100x100 mm 64 C.I. Cover and frame 300X300 mm inside 65 Common burnt clay F.P.S. (non modular) bricks class designation 7.5 66 PVC vent cowl 110 mm dia 67 Semi Rigid PVC waste pipe for sink and wash basin 32 mm dia with length not less than 700 mm i/c PVC waste fittings 68 PVC pipe 63 mm outer dia . 6kgf/cm2 69 PVC pipe 15 mm outer dia 10kgf/cm2 70 Polyethylene water storage tank with cover and suitable locking arrangemnet 71 Material - 75 mm valve 72 Oxidised mild steel tower bolt (barrel type) 200x10 mm 73 Oxidised mild steel screws 30 mm 74 Iron hooks & eyes 100 mm 75 Brass mortice latch and lock 100 x 65 mm with6 levers and a pair of brass lever handles 76 Anodised Aluminium hanging type door stopper 77 Chromium plated Brass screws 25 mm 78 PTMT - Towel Rail (600 mm) 79 Second class teak wood in scantling 80 Float Valve 20mm with Rod 81 Boulder 50 mm to 200 mm 82 Mild steel tubes hot finished welded type 83 Welding by electric plant 84 Black Japan 85 Electrification . Last date of submission for this tender is 2025-09-26. This is a Construction Material tender in Kadungalloor, Kerala
Free up your BG limit
Cover your EMD without touching your bank limit.
Get a quoteDocuments
6 issued- Tender Document 1htmlHTML document
- Tender Document 2pdfPDF document
- Tender Document 3xlsxXLSX document
- Tender Document 4pdfPDF document
- Tender Document 5pdfPDF document
- Tender Document 6pdfPDF document
Unlock the Tender details for free
Bidder Details
- Technical: clearedFinancial: clearedAOC: clearedBid value
- Technical: clearedFinancial: clearedAOC: not clearedBid value
- Technical: clearedFinancial: not clearedAOC: not clearedBid value
- Technical: not clearedFinancial: not clearedAOC: not clearedBid value
Unlock the Tender details for free