Grama Panchayat

Grama Panchayat has published Construction Of Anganwadi In Elimala Ward , Anganwadi Construction In Ward 6 , Stone Aggregate(Single Size): 40 Mm Nominal Size , Stone Aggregate(Single Size):20 Mm Nominal Size , Coarse Sand (Zone Iii) , Portland Cement , Twisted Steel/Deformed Bars , Wall Form Panel 1250X500 Mm , Corner Angle 45X45x5 Mm 1.50 M Long , 100 Mm Channel Shoulder 2.5 M Long , Double Clip (Bridge Clip) , Single Clip , M.S. Tube 40 Mm Dia , Structural Steel Such As Tees, Angles, Channels And R.S. Joists , Red Oxide Zinc Chromate Primer , Adjustable Telescopic Prop 3 M (2.02-3.75M) , Beam Clamp 300-380 Mm (450-1070 Mm) , Adjustable Span Eso+Si (2.35-3.40) , Second Class Kail Wood In Planks , Second Class Kail Wood In Scantling , Safeda Ballies 125 Mm Diameter , Wall Form Panel 1250X450xmm , Corner Angle 45X45x5 Mm 2.50 Long , Column Clamp 450X1070 Mm , Prop 2 M (2-3.5M) , Stone Aggregate(Single Size): 10 Mm Nominal Size , Royalty For Good Earth , Solid Blocks Of Size 40X20x20cm , Solid Blocks Of Size 40X20x15cm , Mild Steel Round Bar Above 12 Mm Dia , Flats Up To 10 Mm In Thickness , Anjili Wood Scantls , Bright Finished Or Black Enameled Mild Steel Butt Hinges 100X58x1.90 Mm , Bright Finished Or Black Enameled Mild Steel Butt Hinges 50X37x1.50 Mm , Bright Finished Or Black Enameled Mild Steel Screws 40 Mm , Bright Finished Or Black Enameled Mild Steel Screws 20 Mm , Anjili Wood Planks , Float Glass Sheet Of Nominal Thickness 4 Mm (Weight Not Less Than 10 Kg/Sqm) , 50 Mmx42 Mmx2 Mm Thick Factory Made Door Frame Of Pvc Extruded Sections In White, Grey Or Wooden Finish , 24 Mm Thick Factory Made Shutters With Styles, Rails And Panels Of Pvc Extruded Sections In White, Grey Or Wooden Finish , Multi Surface Paint , Special Primer (C.W) , 200 Mm Aluminium Aldrop , Iron Hooks & Eyes 100 Mm , Anodised Aluminium Tower Bolt (Barrel Type) 200X10 Mm , Chromium Plated Brass Screws 30 Mm , Anodised Aluminium Handles 125 Mm With Plate 175 X 32 Mm , Chromium Plated Brass Screws 25 Mm , Fine Sand (Zone Iv) , Water Thinnable Cement Primer For Interior Wall Surface, Having Voc Content Less Than 50 Gms/Litre , Plastic Emulsion Paint , Acrylic Exterior Paint , Exterior Primer , Ceramic Glazed Tiles Ist Quality 300 X 300 Mm In All Shades And Designs Of White, Ivory, Grey, Fume Red Brown Etc. , Ceramic Glazed Tiles Ist Quality Minimum Thickness 5 Mm In All Colours Shades And Designs Except Burgundy, Bottle Green Black , Stainless Steel Kitchen Sink - Without Drain Board 470X420 Mm Bowl Depth 178 Mm , C.I. Bracket For Wash Basin And Sinks , Semi Rigid Pvc Waste Pipe For Sink And Wash Basin 32 Mm Dia With Length Not Less Than 700 Mm I/C Pvc Waste Fittings , Ptmt - Towel Rail (600 Mm) , Second Class Teak Wood In Scantling , Brass Stop-Cock 15 Mm Dia , Brass Full Way Valve With C.I. Wheel (Screwed End) 25 Mm Dia , Pvc Pipe 25 Mm Outer Dia. 10Kgf Cm2 , Pvc Pipe 40 Mm Outer Dia. 10Kgf/Cm2 , Pvc Pipe 50 Mm Outer Dia.6Kgf/Cm2 , Pvc 45 Degree Elbow 63 Mm Dia , Pvc Bend 63 Mm Dia , Pvc Vent Cowl 63 Mm Dia , Pvc End Cap 63 Mm Dia , Pvc Elbow 110 Mm Dia , Pvc Tee 110X110x110mm Dia , Pvc Vent Cowl 110 Mm Dia. Last date of submission for this tender is 2024-01-11. This is a Building Work tender in Kuttichal, Kerala