Grama Panchayat

Grama Panchayat has published Supply Of Bottle Booth Supply Of Bottle Booth - 42 Nos (Size 1.60 X 0.80 M) , Construction Of Bottle Booths (42 Nos) (Size 1.60 X 0.80 M) , Steel Work In Built Up Tubular (Round, Square Or Rectanglar Hollow Tubes Etc. ) Trusses Etc., Including Cutting, Hoisting, Fixing In Position And Applying A Priming Coat Of Approved Steel Primer, Including Welding And Bolted With Special Shaped Washers Etc. Complete. Hot Finished Welded Type Tubes. A) 50 X 25X2.60Mm Rectangular Hollow Section For Supporting Post Of Roof.For Post (Front) 2 X 2.10 = 4.20 For Post (Back) 2 X 1.80 = 3.60 Tie Beam (Length Wise) 2 X 1.60 = 3.20 Tie Beam (Width Wise) 2 X 0.80 = 1.609.40 M X 2.71Kg/M= 25.474 Kgb) 25X25x2.60Mm Square Hollow Section For Common Rafters. 3 X 1.30 = 3.90 3 X 0.60 = 1.80 5.70 M X 1.69 Kg/M = 9.633 Kg = 35.107 Kg (Say 35.50 Kg) , Steel Work Welded In Built Up Sections Of Framed Work, Including Cutting, Hoisting, Fixing In Position And Applying A Priming Coat Of Approved Steel Primer Using Structural Steel Etc. As Required In Grainting, Frames, Guard Bar, Ladder, Railing Brackets, Gates And Similar Works. A) 30 X 20 X 3Mm Angel Iron Frame And 5Mm Dia Ms Rods Vertical And Horizontal Nets At 10Cm C/C For Compartment Bottom Row Compartment 1 X 1 = 1 No. No. Of Mesh Pieces 2 X 5 = 10 Nos. Top Row Compartment 1 X 1 = 1 No. No. Of Mesh Pieces 2 X 4 = 8 Nos. 1 Pieces Weight Of Mesh = 6.023 Kg. Hence 18 Nos. Pieces Of Weight (10 +8) 18 X 6.023 = 108.414(Say 110.00 Kg) , Providing And Fixing Precoated Galvanised Iron Profile Sheets (Size, Shape And Pitch Of Corrugation Asapproved By Engineer-In-Charge) 0.50 Mm (+ 0.05 %), Total Coated Thickness With Zinc Coating 120Grams Per Sqm As Per Is: 277, In 240 Mpa Steel Grade, 5- 7 Microns Epoxy Primer On Both Side Of Thesheet And Polyester Top Coat 15-18 Microns. Sheet Should Have Protective Guard Film Of 25 Micronsminimum To Avoid Scratches During Transportation And Should Be Supplied In Single Length Upto 12Metre Or As Desired By Engineer-In-Charge. The Sheet Shall Be Fixed Using Self Drilling /Self Tappingroof1 X 2.50 X 1.42 = 3.55 1 X 2.50 X 0.65 = 1.61 (Say 5.20 M2) , Providing Lock And Locking Arrangement With Name Board And Unforseen Exp. Last date of submission for this tender is 2022-01-27. This is a Coats And Jackets tender in null, Kerala