District Panchayat

District Panchayat has published tender for general-chirakkadavu kshethra kulam-chirakkadavu kshethra kulam-general civil work--1 chirakkadavu kshethra kulam 1.001 50.2.3.1:pumping or bailing out water and removing slush etc by using pump set including cost of labour, oil hire charges of pumpset, etc complete 1.002 2.6.1:earth work in excavation by mechanical means (hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by engineer-in-charge.all kinds of soil 1.003 2.26.1:extra for every additional lift 1.5 m or part there of in excavation / banking excavated or stacked materials.all kinds of soil 1.004 od847/2025-2026:dry rubble masonry- dry rubble without concrete levelling course masonry with good quality blasted rubble including packing to compactness to lines and level cost and conveyance of all materials labour charges etc complete as per direction of departmental officers at site. 1.005 5.9.1:centering and shuttering including strutting, etc. and removal of form for:foundations, footings, bases of columns, etc for mass concrete 1.006 5.22.6:steel reinforcement for r.c.c work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelthermo - mechanically treated bars of grade fe-500d or more 1.007 5.1.2:providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - all work up to plinth level:1:1:5:3 (1 cement 1.5 coarse sand :3 graded stone aggregate 20 mm nominal size derived from natural sources) 1.008 4.3.1:centering and shuttering including strutting, propping etc. and removal of form work for:foundations, footings, bases for columns 1.009 4.1.3:providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-iii)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) 1.01 50.6.1.4:solid block masonry using pre cast solid blocks (factory made) of size 30x20x20cm or nearest available size confirming to is 2185 part i of 1979 for foundation and plinth with thickness 20cm and above in: cm 1:6 ( 1 cement : 6 coarse sand ) etc complete 1.011 10.26.3:providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approves steel primer.g.i. pipes 1.012 16.70.2:providing and fixing g.i. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts , bolts and washers as required complete as per the direction of engineer-in- charge.made of g.i wire of dia 4 mm. pvc coated to achieve outer dia. not less than 5 mm in required colour and shade 1.013 od848/2025-2026:granular sub- base/base/surface course with local materials (table 400.13) by mix in place method normal.construction of granular sub-base by providing local material spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at once and compacting with smooth wheel roller to achieve the desired dencity complete as per clause 401.4 s per technical specification clause 408. using gravel mix soil. unit=cum taking output=300cum 1.014 16.68:providing and laying 60 mm thick factory made cement concrete interlocking paver block of m - 30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of engineer-in-charge. 1.015 10.28:providing and fixing stainless steel (grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size on the top of the floor or the side of waist slab with suitable arrangement as per approval of engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) 1.016 13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand) 1.017 13.37.1:white washing with lime to give an even shade:new work (three or more coats) 1.018 11.20.4:chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete on 20 mm thick bed of cement mortar 1:4 ( 1 cement : 4 coarse sand).ordinary cement without any pigment . Last date of submission for this tender is 2026-02-04. This is a Earth Moving Machinery tender in Clappana, Kerala