Deparment Of Technical Education

Deparment Of Technical Education has published Purchase Of Equipments For Power System Lab In Eee Department Purchase Of Equipments For Power System Lab In Eee Department , Purchase Of Equipmentsfor Power System Lab , Ct And Pt Test Setup Specifications Specifications: Current Source Module: Current Source Transformer Current Rating 0-20A Continuously Variable Single Phase Autotransformer For Adjusting The Current Voltage Source Module:2 Amp Auto Transformer 0-270V. Output Terminals In Front Panel. Fuse/Breaker For Protection Ct & Pt Module:15/5 A Ct, 270/110V Pt Digital Voltmeter & Digital Ammeter For Measurement Make: Pragna Micro Designs , Electro Mechanical Type Over Current/Earth Fault Relay Specifications Single Pole /Element Over Current Relay. Ct Input: 5A, Pms:10% -200% In Steps Of 25% , Tms:0.1 To 1 In Steps Of 0.1S Function: Idmt Curve Of 3Sec As Per Iec-255 ,Self-Powered, Hand Reset Type With Mechanical Flag Indicator , Electro Mechanical Type Over Voltagerelay Specifications Voltage Rating :0-400V Ac With Voltage Multiplier Plug Setting. Time Multiplier Setting (0.1 To 1 In Steps Of 0.1S) , Microprocessor Based Static Over-Current Relay (Non – Directional Relay) Specifications Single Phase Over Currentinverse & Definite Time Trip Characteristics.Built In High Set Facilitymicro-Controller Based Design. Rated Current (In):5A Rated Frequency50hz ± 2.5 Hz Auxiliary Power Supply: 95V To 240V Ac/Dc ± 10% Relay Settings:10% To 200% Of In In Steps Of 10% Time Multiplier Tms0.1 To 1.6 In Steps Of 0.1 , Microprocessor Basedstatic Over/Under Voltage Relay Specifications Single Phase Over Currentinverse & Definite Time Trip Characteristics.Built In High Set Facilitymicro-Controller Based Design. Rated Voltage(Vn): 115/230/415 V Rated Frequency50hz ± 2.5 Hz Auxiliary Power Supply: 95V To 240V Ac/Dc ± 10% Pick Up Voltage Settings: Over Votage Mode: 105% To 180% Of Vn In Steps Of 5% Under Voltage Mode: 95% To 20% Of Vn In Steps Of 5% Time Multiplier Tms0.1 To 1.6 In Steps Of 0.1 , Solid Insulation Test Kit: 30Kv Specifications Insulation Break Down Tester 0-30Kv 50Ma Tranformerinput 220V,Output - 30Kv,Control Panel Having Features Of Mains On, Ht On, Ht Off, Unit Ready For Zero Indicationhigh Sensitive Tripping Device , Power Factor Improvement Study Kit Specifications With Capacitorbank 5Kvar Capacity - With 3Hp Induction Motor With Loading Arrangement, Multi Function Meter,5 Kvar Capacitor Bank , Auto Transformer Specifications Input Voltage: 230V, 1 Phase, 50 Hz Out Put Voltage : 0 - 270 V, 15A , Analogue Stop Watch. Last date of submission for this tender is 2022-05-30. This is a Indicators And Reagents tender in Palakkad, Kerala