Cochin Shipyard Limited

Cochin Shipyard Limited has published Tender For Painting Of Samudrika Enclave At Panampilly Nagar. ; 1 Washing And Cleaning Surface Ofbuildings And Compound Wall Etc. Using Water Pressure Jet Washer Machine At All Heights Including All Labour Charges To Removing Off All Dirt, Wild Growth Etc. Disposing The Debris Within The Compound Etc. Complete. 2 Washing And Cleaning Surface Ofconcrete Paver Tiles Using Water Pressure Jet Washer Machine Including All Labour Charges To Removing Off All Dirt, Wild Growth Etc. Disposing The Debris Within The Compound Etc. Complete. 3 Chipping And Removal Of Polysulphide Sealant From Wall And Filling With Crack X Or Equivalent Material, Making Good The Surface Matching The Existing Wall , Disposal Of The Waste Materials Within The Compound, Including Cost And Conveyance Of All Materials, Labour, Scaffolding Other Incidentals, ( Wherever Required ) Etc. Complete At All Levels As Directed By The Engineer-In-Charge. 4 Supplying And Applying Crack X Or Equivalent Materialalong Walls On All Heights And Making Good The Surface Matching The Existing Surface Including Cost And Conveyance Of All Materials , Labour Etc. Complete. The Rate Is Inclusive Of Making Groove Up To A Maximum Width Of 20Mm Or Nearest. 5 Providing And Applying Exterior Grade Puttyover Plastered Surface To Prepare The Surface Even And Smooth Complete Including Cost And Conveyance Of All Materials, Labour Etc. Complete At All Levels As Directed By Engineer-In-Charge 6 Scrapping And Cleaning The Damaged Areas Of Painted Walls And Painting With Damp Guard Of Approvedquality, Brand ( Application To Be Carried Out As Per Manufacturers Specification ) Including Cost And Conveyance Of All Materials, Labour, Scaffolding Other Incidentals, ( Wherever Required ) Etc. Complete At All Levels As Directed By The Engineer-In-Charge. 7 Painting With One Coat Of Exterior Gradeprimer Of Approved Quality, Brand After Rubbing And Cleaning The Surface Including Cost And Conveyance Of All Materials, Labour, Scaffolding Other Incidentals, ( Wherever Required ) Etc. Complete At All Levels As Directed By The Engineer-In-Charge. 8 Painting With 1Coat Of Acrylic Emulsion Paint Of Approved Quality And Colourincluding Cost And Conveyance Of All Materials, Labour, Scaffolding Other Incidentals Etc. Complete At All Levels As Directed By The Engineer-In-Charge. 9 Interior Emulsion 10 Exterior Weather Proof Acrylic Emulsion 11 Painting On Iron Or Wood Surface With One Coat Of Synthetic Enamel Paint Of Approved Quality And Colour After Rubbing And Cleaning The Surface Using Wire Brush, Sand Paper Etc. Wherever Required Including Cost And Conveyance Of All Materials, Labour, Scaffolding Other Incidentals Etc. Complete Upto 10M Height As Directed By The Engineer-In-Charge. 12 Finishing The Wooden Surface With Melamine Polish After Soft Smoothening The Wooden Surface With Sand Paper, Cleaning The Surface And Applying A Coat Of Melamine Polishincluding Cost And Conveyance Of All Materials , Labour Etc. Complete. 13 Polishing In High Gloss / Matt Finish Melamine Clear Polish On Wood Work In Required Color / Wooden Shade Texture With Following Process In The Sequence As Detailed Below:1. The Surface To Be Polished And Rubbed With Sand Paper 80 / 120 No. And Then With Sand Paper Of 160 / 180 Nos.2. Applying Two Coats Of Sealer And Allowing Sufficient Drying Time For 1St Coat And 2Nd Coat.3. On Drying Of Sealer Coat, Wet Rubbing With Emery Cloth Of Finer Grading With Ample Water To Remove Excess Sealer Layer And Make The Surface Further Smooth, Then Surface Is Applied With Special Grade Melamine Fillers To Fill All The Small And Big Holes / Grooves Etc. Filler Coat To Be Given Sufficient Drying Time.4. On This, 1St Coat Of Melamine Polish Is Applied Using Melamine Clear Polish And Melamine Thinner In Required Proportion. This 1St Coat Is Allowed To Dry For 24 Hrs Then This Dry Surface Is Again Fine Wet Rubbed Smooth, Which Is Further Allowed To Dry . The Final Melamine Polish Is Applied Using Melamine Clear Polish And Melamine Thinner Mixed In Required Proportion Complete As Per Direction Of Engineer-In-Charge. ( Final Coat To Be Done In 1 Or 2 Layers Without Gap Of Time. ) . Last date of submission for this tender is 2024-01-29. This is a Painting tender in kochi, Kerala