Rail Wheel Factory

Rail Wheel Factory has published Supply Of Face Milling Standard Pitch Cutter.Face Milling Standard Pitch Cutter.,Item Description: Supply Of 01 Set Consisting Of (A) 20 Numbers Of 160 Mm Diamet Er Indexable Insert Type Face Milling Standard Pitch Cutter With A Minimum Of 10 Fixe D Pockets, Insert Clamping Shall Be With A Center Locking Screw, 45 Deg Lead Angle And Cutting Direction Right With Through Coolant Designed For Good Curly Chip Fo Rmation And Flute Spacing Design For Efficient Chip Flow. Minimum Depth Of Cut Shal L Be 02 Mm. (B) 1000 Numbers Of Two Sided Octagonal Carbide Inserts With 16 Indexable Cutting Edge And Appropriate Grade To Suit The Application For Both Roughing And Finishing Operations, Efficient Chip Breaker On Both Sides. Insert Thickness Shall Be A Minimum Of 05Mm, Cutting Edge Length And Radial, Axial Rake Angle Shall Be As Per S Tandard Configuration To Suit The Cutting Application And The Cutter Offered. 25 N Umbers Of Insert Fixing Screw,02 No Of Screw Drivers Is To Be Provided With Each Cu Tter. The Milling Cutter And Inserts Are For Use In Sema Gdc 100 Machine For End Mill Ing (Roughing And Finishing Operations) Of Railway Axle End Faces Of Upto 15Mm In T Wo Or More Passes And Shall Be Suitably Designed To Withstand Rough Machining C Onditions As Jobs (Having Hardness From 170 To 350 Bhn) To Be Machined Generally Ha Ve Black Surface, Hard Spots, Nclusions, Cracks Etc And Cutter May Be Subjected T O Interrupted Cutting & Sudden Impact Loading During Operation Under Operating C Onditions Of Cutting Speed 650 Rpm, Feed 1650 Mm/Min. A Surface Finish Of N7 Is Require D On The Milled Surface. Makes: Sandvik, Seco, Widia, Boehlerit, Sumitomo, Tungaloy, I Scar, Mapal, Kennametal, Taegutec Or Equivalent. Performance: Two Cutters Are Si Multaneously Used On The Machine. Each Insert Has To Perform Milling Of A Minimum Of 10 Axles And Each Cutter To Perform Milling Of A Minimum 500 Number Of Axle End Faces Page 1 Of 6 Run Date/Time: 11/06/2024 11:14:56Stores/Rwf Tender Document =. Last date of submission for this tender is 2024-06-21. This is a Cutting Crimping and Punching Tools tender in bangalore, Karnataka