🎉 Your free trial plan has started. Plan will expire in 0 days

Rail Wheel Factory

bangalore, karnataka

AOC value
₹6.55L
AOC date
16 Jul
Completion
Refer Docs
L1 bid
Refer Docs

Timeline

  1. -Published
  2. -Closes
  3. -Bid opens
  4. 16 Jul 26AOC date

Important info

Result ID
Refer Docs
Award of contract
16/07/2026
Published
Refer Docs
Tender closed
Refer Docs
Tender no
Bidding URL
Tender
Bidder details

AOC description

Rail Wheel Factory has published Supply Of helical inline gear motor. , helical inline gear motor to the model no. sk 973.1 - 112mp/4 tf for axle pusher chain conve yor of make m/s nord or substantially equivalent with following features: input speed(rpm): 1440; output speed(rpm): 21; gear ratio: 68.5; power (kw): 4; service factor: 1.8; output torque: 1817 nm; overhung lo ad: 25 kn; axial load: 22 kn; motor inverter speed range: standard line powered inverter capable; voltag e: 400/690 v; frequency: 50 hz; efficiency class: ie3; current 1: 7.85 a; current 2: 4.53 a; cosinus: 0.83; m otor duty: s1 - continuous; enclosure: ip55; insulation class - f; mounting pos - m1; housing material: cast i ron housing; type of housing: foot mount; output shaft: solid keyed shaft; output shaft (dia x length): 60 x120mm; output shaft material: standard; gearbox breather options: auto vent; gearbox sealing options: fkm seals; bearing design: standard bearings; motor cooling: tefc - totally enclosed fan cooled; motor t hermal protection: thermistor; motor option: fluoro rubber motor seals; height of output shaft center from bottom of base plate: 225 mm; mounting base plate details: minimum plate thickness: 50 mm; 04 holes of 22 mm dia each with square pattern; distance between holes along the shaft: 310 mm; distance between holes perpendicular to shaft: 250 mm; note: - (i) material of construction: fabricated steel housing (stress relieved) (ii) all gears shall be manufactured from steel forgings or rolled bar made from steel 17cr ni mo6 /18cr ni mo6 (case hardening steel). (iii) all gears shall be case hardened to 58-62 hrc and profile ground . (iv) output shaft shall be of en 9 material normalized to 201 bhn (min) (v) bearing used shall be rolling el ement type of make skf/ntn/timken/fag only. special conditions: above specified materials are the minim um required standard to be considered while designing the gear motor. [ warranty period: 18 months aft er the date of delivery ] ]. Last date of submission for this tender is 2026-05-05. This is a Railway Ancillaries tender in Bangalore, Karnataka

Free up your BG limit

Cover your EMD without touching your bank limit.

Get a quote
Tenderbook Surety

Documents

1 issued
  • Tender Document 1html
lock-red

Unlock the Tender details for free

Bidder Details

  • Technical: clearedFinancial: clearedAOC: cleared
    Bid value
  • Technical: clearedFinancial: clearedAOC: not cleared
    Bid value
  • Technical: clearedFinancial: not clearedAOC: not cleared
    Bid value
  • Technical: not clearedFinancial: not clearedAOC: not cleared
    Bid value
lock-red

Unlock the Tender details for free

Disclaimer: Tenderbook takes every possible care to ensure the accuracy and authenticity of the tender information published on the platform. However, users are requested to verify the details from the original Tender Notice or Tender Document issued by the respective tendering authority before making any decisions or taking action related to a tender. We are not liable for any loss or damages arising from its use. For any corrections or feedback, connect with us at contact@tenderbook.in