Public Works Department

Public Works Department has published Installation Of Gym Equipments At Children Park Hiranagar, Kathua - Horse Rider Station: Providing, designing and fixing of horse rider station of size 1000x600x1200 mm fabricated with main post of 114 mm dia and 2.5mm thick and rest of the pipe 40mm dia and 2.5mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized and powder coated using. All pipe are welded with joints as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Seat and base plate cover to be made from plastic with rounded edges to prevent any impact of injury and UV resistant. Bearing used shall be maintenance free, duly oil sealed and self-lubricated. All open ends of pipe to be closed by GI/LLDPE caps for user safety. The equipment to be fixed on ground with concrete of minimum strength M-25 and J shape welded bolts and once the concrete is set, fix theequipment on to it and cover nuts and bolts with the base plate. All complete as per direction and approval of engineer-in-charge regarding material, shape of equipment, colour on metal, seat and base cover plate and fixing of equipments etc. The Job includes material Cost, Labour Cost, Transportation Cost and Taxes Leg Press: Providing, designing and fixing of leg press of size 2000x550x1600 mm fabricated with main post of 114mm dia and 2.5mm thick and rest of the pipe 40mm dia all pipes made up of hot rolled tubular steel and hot dipped galvanized and power. All pipe are welded with joints as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Pedals and base plate cover shall be made of plastic with rounded edges to prevent any impact of injury and UV resistant. Bearing used shall be maintenance free, duly oil sealed and self-lubricated. All open ends of pipe to be closed by GI/LLDPE caps for user safety. The equipment to be fixed on ground with concrete of minimum strength M-25 and J shape welded bolts and once the concrete is set, fix the equipment on to it and cover nuts and bolts with the base plate. All complete as per direction and approval of engineer-in-charge regarding material, shape of equipment, colour on metal, seat and base cover plate and fixing of equipments etc. The Job includes material Cost, Labour Cost, Transportation Cost and Taxes Exercising Bar: Providing and designing and fixing of exercising bar in a pair of size 1800x630x1700mm fabricated with main post of 114mm dia and 2.5mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized and power coated .All pipe are welded with joints calloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Base plate cover to be made from plastic with rounded edges to prevent any impact of injury and UV resistant. Bearing used shall be maintenance free, duly oil sealed and self-lubricated. All open ends of pipe to be closed by GI/LLDPE caps for user safety. The equipment to be fixed on ground with concrete of minimum strength M-25 and J shape welded bolts and once the concrete is set, fix the equipment on to it and cover nuts and bolts with the base plate. All complete as per direction and approval of engineer-in-charge regarding material, shape of equipment, colour on metal, seat and base over plate and fixing of equipments etc. The Job includes material Cost, Labour Cost, Transportation Cost and Taxes Arm Wheel: Providing, designing and fixing of arm wheel in a pair of size 870x800x1940mm fabricated with main post of 114mm dia and 2.5mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized and power. All pipes are robotic welded with joints as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Base plate cover shall be made of plastic with rounded edges to prevent any impact of injury and UV resistant. Bearing used shall be maintenance free, duly oil sealed and self-lubricated. All open ends of pipe to be closed by GI/LLDPE caps for user safety. The equipment to be fixed on ground with concrete of minimum strength M-25 and J shape welded bolts and once the concrete is set, fix the equipment on to it and cover nuts and bolts with the base plate. All complete as per direction and approval of engineer-in-charge regarding material, shape of equipment, colour on metal, seat and base cover plate and fixing of equipments etc. The Job includes material Cost, Labour Cost, Transportation Cost and Taxes Twister Triple: Providing, designing and fixing twister of size 1400x1400x1350mm fabricated with main post of 114mm dia and 2.5mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized and power. All pipe are welded with joints as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Base plate cover made of plastic with rounded edges to prevent any impact of injury and UV resistant. Bearing used shall be maintenance free, duly oil sealed and self-lubricated. All open ends of pipe to be closed by GI/LLDPE caps for user safety. The equipment to be fixed on ground with concrete of minimum strength M-25 and J shape welded bolts and once the concrete is set, fix the equipment on to it and cover nuts and bolts with the base plate. All complete as per direction and approval of engineer-in-charge regarding material, shape of equipment, colour on metal, seat and base cover plate and fixing of equipments etc. The Job includes material Cost, Labour Cost, Transportation Cost and Taxes CycleProviding, designing and fixing rowing machine of size 850×490×1300 mm fabricated with main post of 38mm dia and 2.5mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized and power. All pipe are welded with joints as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Seat shall be made of plastic with rounded edges to prevent any impact of injury and UV resistant. Bearing used shall be maintenance free, duly oil sealed and self-lubricated. All open ends of pipe to be closed by GI/LLDPE caps for user safety. The equipment to be fixed on ground with concrete of minimum strength M-25 and J shape welded bolts and once the concrete is set, fix the equipment on to it and cover nuts and bolts with the base plate. All complete as per direction and approval of engineer-in-charge regarding material, shape of equipment, colour on metal, seat and base cover plate and fixing of equipments etc. The Job includes material Cost, Labour Cost, Transportation Cost and Taxes Waist & Back Relaxer: Providing, designing and fixing rowing machine of size 1050×830×1500 mm fabricated with main post of 114mm dia and 2.5mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized and power. All pipe are welded with joints as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Base plate cover shall be made of plastic with rounded edges to prevent any impact of injury and UV resistant. Bearing used shall be maintenance free, duly oil sealed and self-lubricated. All open ends of pipe to be closed by GI/LLDPE caps for user safety. The equipment to be fixed on ground with concrete of minimum strength M-25 and J shape welded bolts and once the concrete is set, fix the equipment on to it and cover nuts and bolts with the base plate. All complete as per direction and approval of engineer-in-charge regarding material, shape of equipment, colour on metal, seat and base cover plate and fixing of equipments etc. The Job includes material Cost, Labour Cost, Transportation Cost and Taxes . Last date of submission for this tender is 2024-12-02. This is a Gym Equipment tender in Kathua, Jammu And Kashmir