Public Health Engineering Department

Public Health Engineering Department has published Replacement Of Wornout Components Of Hc Pump Set Of Capacity 5000 Gph X 300 Mtrs Head And 10000 Gph X 250 Mtrs Head Installed At D / Well Cum P / S Charu Nallah And F / P Nagrota Respectively.- 1 Replacement Of Wornout Components Of Hc Pump Set Of 5000 Gph X 300 Mtrs Head D / W Cum P / S Charu Nallah ( Iit ) Unit-Iiby Disconnecting Power Cables And Dismantling Of The Suction And Delivery Bends And Removing The Pump Set From Base Plate After Decoupling. Shifting The Pump Set Outside Pump Room With The Help Of Chain Pulley Block And Manual Labour And Then Loading In Mechanical Transport For Carriage To Workshop And Unloading There. Segregating The Damaged Parts I.E. Pump Shaft, Impellers, Stage Casing C.I Bodies, Gland Set And Bearings, Etc. Repairing Of Pump Shaft By Way Of Welding , Turning And Polishing Making Bearing Size. P / F Of New Impellers- 04 No. And Repair To 04 No. Impeller, Neck Rings – 8 Nos., Gland Bush -02 No., Repairs To Bearing Housing, Bracket Sleeve-01 No, Diffuser Bush – 8 Nos., Coupling Bolts And Rubber Bushes. P / F Of New Bearings 7307-02 No., N 307- 02 No.Assembling The Pump Motor Set, Shifting Back To Site Using Manual Labour And Then Fitting On Base Plate, Suction And Delivery Flanges Both By P / F Of Nuts, Bolts And Rubber Flanges After Proper Leveling / Alignment Etc. The Job Includes Carriage Charges From Pump Room To Road Side And Vice Versa. Complete Job Including Cost Of Material, Labour, Installation And Testing At Site. 2 Replacement Of Worn Out Components Of 10000 Gph X 250 Mtrs Headhc Pump Set Installed At F / Pnagrota By Disconnecting Power Cables And Dismantling Of The Suction And Delivery Bends And Removing The Pump Set From Base Plate After Decoupling. Shifting The Pump Set Outside Pump Room With The Help Of Chain Pulley Block And Manual Labour And Then Loading In Mechanical Transport For Carriage To Workshop And Unloading There. Segregating The Damaged Parts I.E. Pump Shaft, Impellers, Stage Casing C.I Bodies, Gland Set And Bearings, Etc. Repairing Of Pump Shaft By Way Of Welding , Turning And Polishing Making Bearing Size. P / F Of New Impellers- 05 No. And Repair To 03 No. Impeller, Neck Rings – 08 Nos., Gland Bush -02 No., , Diffuser Bush – 08 Nos., Coupling Bolts And Rubber Bushes. P / F Of New Bearings 7308 -02 No And N 308 -01 No Assembling The Pump Motor Set, Shifting Back To Site Using Manual Labour And Then Fitting On Base Plate, Suction And Delivery Flanges Both By P / F Of Nuts, Bolts And Rubber Flanges After Proper Leveling / Alignment Etc. The Job Includes Carriage Charges From Pump Room To Road Side And Vice Versa. Complete Job Including Cost Of Material, Labour, Installation And Testing At Site.. Last date of submission for this tender is 2022-08-01. This is a Bolts tender in Jammu, Jammu And Kashmir