Nhpc Limited

Nhpc Limited has published Bids Are invited for SYNTHETIC ENAMEL PAINT YELLOW , SYNTHETIC ENAMEL PAINT WHITE , SYNTHETIC ENAMEL PAINT BLACK , SYNTHETIC ENAMEL PAINT GREEN , SYNTHETIC ENAMEL PAINT PO RED , ENAMEL PAINT SKY BLUE , TURPENTINE or TARPIN OIL , WALL CARE PUTTY , PLASTIC EMULSION PAINT , LIME , PAINTING BRUSH 4 inch , PAINTING BRUSH 6 inch , CEMENT PPC , EUROPEAN TYPE WATER CLOSET , Looking Mirror , CP TOWEL ROD , PLY WOOD 6MM , PLYWOOD 12MM , FLUSH DOOR SHUTTER 30 MM , TOWER BOLT_ALUMINIUM_4 inch , HYDRAULIC DOOR CLOSER , ALUMINIUM DOOR STOPPER , GLASS PUTTY , FEVICOL , CURTAIN ROD WITH ACCESSORIES , MS HINGE 3 inch , HINGES 4 inch , NAIL 1 by2_1kg , NAILS 1 inch , NAILS 1 and half inch , NAILS 2 inch , NAILS 3 , NAILS 4 , EUROPEAN SEAT COVER , PVC LOW LEVEL CISTERN 10 LTR CAPACITY ISI MAKE , PVC CONNECTION 15 MM 45 CM LONG_HIGH PRESSURE BEARING FOR HOT WATER , PVC Water tank 500 ltr , PVC WATER TANK 1000LT , PVC FLEXIBLE PIPE 25 MM DIA , PVC BIB COCK 1by 2 inch , CP ANGLE VALVE 15MM , CP PILLAR COCK , CP Bib COCK , GATE VALVES 15MM , GATE VALVES 20MM , GATE VALVE 1 inch , GI GATE VALVE 65 MM , GATE VALVE 80 MM , GI UNION 1by 2 inch_15MM DIA , GI UNION 3by 4 inch DIA , GI UNION 25MM , GI NIPPLE 1 by2 multiply by 4 , GI NIPPLE 1 by2 multiply by 6 , GI NIPPLE 3 by4 multiply by 4 , TANK NIPPLE 20MM , GI TEE 20MM , GI TEE 1 by 2 inch , GI SOCKET 15MM DIA , GI SOCKET 20MM , GI ELBOW 1 by 2 inch , GI BEND 1 , GI SOCKET 25 MM DIA , GI UNION 80MM DIA , STEEL SINK , M SEAL COMPOUND , WELDING ELECTRODE MS E6013 SIZE 3 point 15 mm , HEXA BLADE , DUSTBIN SMALL SIZE APPROX 10L , DUSTBIN BIG WITH COVER 50 LTRS , DUSTBIN 120 LTRS , GI PLUG 20MM , PLUG 15MM 1 by2 CODED AS GI INSIDE PLUG , JET SPRAY , PIPE WRENCH 8 inch , SLIDE WRENCH 12 inch , TEFLON TAPE 1 inch , PAINTING ROLLER 9 WITH HANDDLE , SCREW DRIVER SET , PVC WASTE PIPE 32MM , WALL HANGER , CENTRE HOLE BASIN MIXER , CP SINK MIXER , PAD LOCK , GI REDUCER 20 multiply by 15 MM , GI REDUCER 20 multiply by25 MM , SAFETY SHOES BUFF LEATHER WITH DUAL DENSITY SLIP RESISTANCE DIRECT INJECTED PU SOLE AS PER IS 15298 , UMBRELLA , GI ELBOW 20 MM , TOWER BOLT ALUMINIUM 6 inch , SLIDING BOLT ALUMINIUM_200mm multiply by 16mm , Door handle 6 inch , BRASS FLOAT VALVE 3by 4 inch , Glass Shelf 20 , CPVC PIPE 1 by2 10 FT LONG , CPVC PIPE 3 by 4inch_3 METRE LONG , CPVC UNION 3by4 , CPVC ELBOW 3by4 , CPVC SOCKET 3by4 Total Quantity : 3742. Last date of submission for this tender is 2026-04-15. This is a Paint Supply tender in Kathua, Jammu And Kashmir