Military Engineer Services

Military Engineer Services has published Tender For Smart Periodicals At Certain Building Under Aor Of Ge Jammu.; 1 Complete removal of existing treatment including fascias, cornices etc by scrapping with mechanical wall sander (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 80 Grit having dia of 7/9 to make the surface free from dust, loose paint and loose plaster to be completely removed by skilled labour and repair of external wall/Chajjas to be done with repair mortar to get even surface including preparation of old surface of wall/ceiling by filling cracks by Berger Bison Putty / crack fill paste of Berger Paints or equivalent make and make good smoothen surface by sand paper and applying two coats of premium acrylic smooth exterior emulsion of approved colour with silicon additive & Color stay Technology ,Excellent Dirt Pick up resistance of Berger Paints Ltd or equivalent of other approved make with low VOC less than 50 gram/ litre as per the LEEDS specifications, Anti Algal properties in two coats @ 1.79 ltr (undiluted)/ 10 sqm diluted with water as per manufacturer instructions applied over one coat of acrylic water based exterior grade primer @ 0.9ltr(undiluted)/10 sq mtrs diluted with water in 1:1ratio and 1mm thick exterior grade wall putty as per manufactures instruction and all coats incl primer to be applied with fully automatic airless spray machine of paint application with a flow speed of minimum 1 ltr per minute having a pressure of 3300 PSI all as specified and directed.Allow 6-8 hrs to dry the surface in subsequent coats of paint and including necessary scaffolding at any height complete all as specified and as directedMake: Berger PaintsWeathercoat Long LifeFlexo / Nerolac Paints excel Total / Asian Paint Apex Ultima. 2 Preparation of newly plastered surface and applying two coat of premium acrylic smooth exterior emulsion of approved colour with silicon additive & Color stay Technology, Excellent Dirt Pick up resistance of Berger Paints Ltd or equivalent of other approved make with low VOC less than 50 gram/ litre as per the LEEDS specifications, Anti Algal properties in two coats @ 1.79 ltr (undiluted)/ 10 sqm diluted with water as per manufacturer instructions applied over one coat of acrylic water based exterior grade primer @ 0.9ltr(undiluted)/10 sq mtrs diluted with water in 1:1ratio and 1mm thick exterior grade wall putty as per manufactures instruction and all coats incl primer to be applied with fully automatic airlessspray machine of paint application with a flow speed of minimum 1 ltr per minute having a pressure of 3300 PSI.Allow 6-8 hrs to dry the surface in subsequent coats of paint complete all as specified and as directedMake: Berger PaintsWeathercoat Long LifeFlexo / Nerolac Paints excel Total / Asian Paint Apex 3 Note : - Applicable to Srl items 01 and 02 here-in-before :- (a) The contractor has toupload(MOU) as per format in Appx E of tender documents with the company (from the specifiedmakes as per Srl Item No 01 Here-in-before)whose product is proposed to be incorporated in work on100 Rs Stamp Paper duly notarized along with authorized applicators certification of Paint Manufacturer company. No change of brand shall be permitted ai a later stagewithout approval of Accepting Officer. Non compliance will lead to rejection of the bid in Tech evelution. (b) The work pertaining to smartperiodical servciesshall be executed from authorized applicator approved bymanufacturer of which the materials i.e exterior emulsion paint, primer, putty etc is proposed to be used by the contractor as per selected paint/putty manufacture. (c).50% of materials (mentioned at Srl Note (b) above) to be used in work shall bepurchasedby Contractor from original paint manufacturer or their authorized distributor before start of work andwill be kept at site in department store under the supervision of chokidar under lock and key with such mechanism that none of the party can withdraw materials from store without knowledge of other party. Daily consumption of materials shall be monitred in a register duly signed by contractor and Engr-In-Charge. Balance 50% of materials shall be procured after 50% progress of work.(d)Material will only be acceptable at site when purchased from original paint manufacture or, company authorized dealer and necessary confirmation to this effect shall be rendered by the 2nd Party of the MOU (Paint Manufacturer).(e)While claiming running account receipts (RAR) as well as post completion of work the Ist party to the MOU (contractor) is required to furnish a certificate from the 2nd (Paint manufacturer) as well as 3rd party(auth applicator) mentioning the quantity of primer and paint consumed in the work done pertaining to such RAR and that the consumed quantity as well as quantity of work is as per manufactures instruction 4 Taking down cement plaster on brick or stone walls etc including raking out joints, hacking for key,scrubbing down with water, etc complete all as specified and as directed 5 Rendering 15mm thick on brick masonerysurface in cement mortar 1:4including water proofing compound and finished the surface smooth and even withoutusing extra cementcomplete all as specified and as directed 6 5mm thick rendering on ceiling surfaces in cement mortar 1:3 tofinished even and smooth with extra cement complete all as specified and as directed 7 Supply only integral water proofing compound complete all as specified and as directed 8 Taking down eaves gutters and rainwater pipes (any size or pattern) , including all fittings, heads, shoes, bends, swan-necks,etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and as directed. 9 110mm bore PVC soil, waste, and vent pipe in any length with Rubber Ringjoint fixed to wall / laid in floors complete all as specified and as directedincl taking down old pipes of any description . 10 PVC (SWR) bends any radius 110mm bore provided with access door complete all as specified and as directed . 11 PVC (SWR) branch piece (Single T extra) equal or unequal 110 mm bore with oval access door complete all as specified and as directed. 12 PVC (SWR) branch piece with access door single Y equal or un-equal 110mm bore complete all as specified and as directed. . Last date of submission for this tender is 2025-02-06. This is a Building Work tender in jammu, Jammu And Kashmir