Jammu And Kashmir State Power Development Corporation Limited

Jammu And Kashmir State Power Development Corporation Limited has published Procurement Of Tnp, Testing Equipments And Spares For 105 Mw (3X35) Ushp-Ii, Kangan Hep- 1 Digital IR Tester (Megger) 5000 Volts1 TΩ, 1.4 mA, 5 kV Digital Insulation Tester with Digital and Analog Display, CATIII 600V Safety Rating5 test ranges; 250 V, 500 V, 1000 V, 2500 V, 5000 VGuard terminal to shunt surface leakageSelectable DC or AC Volts including frequencyCATIII 600 V safety ratingInsulation (InS), Polarisation Index (PI) and Variable Timed Test modes 2 SF6 Gas Leakage Detector of reputed makeMeasuring Parameters: Halogenated gases Sensitivity: < 0.1 0z. per year (3 gr/yr)Probe Length: 30cm or moreOperating Temperature: 0ºC to 50ºCResponse Time: InstantaneousIndication: 18 (tri-color)Duty Cycle: ContinuousPower Supply: 3V DC 3 Portable Welding Machine (Single Phase) of reputed makeThe welding machine shall be able to be operated both on MMA (Manual Metal Arc) and TIG (Tungsten Inert Gas) mode.Rated Voltage:220 ± 15%Frequency: 50/60 HzInput Capacity: 10.8 kVAInput Current: 43 AmpsOutput Current: 20-160 AmpsTIG Output Current: 5-200 AmpsUsable Electrodes: 1 to 5 mmProtection Class: IP21 or betterEfficiency: 80% or higherPackage Contents: Welding Machine, Welding Gun, Electrode Cable, Earth Cable, Clamps, Goggles, Wire Brush, 10 No’s Tungsten Rods and all other necessary accessoriesTechnology: Inverter IGBT 4 Digital Multimeter of reputed makeSimple one-handed operationMax Voltage: 600 VAC Volts Range: 6 to 600 VDC Volts Range: 6 to 600 VOhms Range: 600 Ω to 40 MΩContinuity: 600 ΩDisplay: Digital Safety Rating: CAT III 600 V 5 Hook-on meter/Clamp meter, 600 V AC/DC, 1000A/600A AC/DC Current, 4000 Ohm Resistance 6 Transformer Oil Sampling Bottles,1 ltr SS Grade (Approved make for DGA Test) 7 Thermal Infrared Camera, XG 102, 120x90 resolution 8 Chain Pulley Block, 10 ton 9 Gas Cutter Torch complete with 10 mtr pipe 10 Grinder 4” 11 Iron cutter 14” 12 12 Volt 180AH Battery 13 12 Volt 65AH Battery 14 Earthing rods 11kV/132kV 15 Slide Wrench 14 inches 16 Hammer 1kg/2kg 17 Hydraulic Crimping Tool, 35 sqmm to 630 sqmm 18 Hydraulic Conductor Cutter 40mm 19 Sealing Belt 10 ton 20 Nylon rope 25mm . Last date of submission for this tender is 2024-11-13. This is a Cutting Crimping and Punching Tools tender in kangan, Jammu And Kashmir