Indian Army

Indian Army has published Bids Are Invited For Excavation In Trenches - Excavation In Trenches N Exc 1.5M Wide And N Exc 1.50M In Depth For Foundation Etc Or For Shaft Wells, Cesspits Manholes Pier Holes Etc N Exc 10 Sqmm On Plan And N. Exc 1.5M In Depth And Getting Out In Any Type Of Soil Complete All As Specified And Directed. Size Of Excn = 1.20X0.345X0.70 For 2 Nos Fire Point Nosl Wht Qty 22.551.050.425 2.276 , M&L Pcc - M&L Pcc 1:4:8 Tpe D2 (40Mm Graded Aggregate) As In Foundations, Filling And Mass Concrete Complete All As Specified And Directed. Nosl Wht Qty 22.551.050.075 0.201 , Providing Precast Cement - Providing Precast Cement Concrete Solid Building Blocks Or Setting In Mortar With Type B1 1:2:4 (20 Mm Graded Stone Aggregate), Set In Cement Mortar In Cm 1:6 Complete All As Specified And Directed. Nosl Wht Qty Upto Gl 22.4 0.90.35 1.512 Above Gl 22.4 0.90.2 0.864 22.4 0.2 0.2 0.192 2.568 , M&L Rendering 10Mm Thick In Cement - M&L Rendering 10Mm Thick In Cement Plaster 1:4 On Fair Faces Of Brick Work Or Concrete Surfaces Finished Even And Smooth Without Using Extra Cement Complete All As Specified And Directed Nosl Wht Qty 42.4 0.35 3.360 42.40.21.920 22.4 0.2 0.960 6.240 , M&L For Preparation Of New Cement Plaster Surface - M&L For Preparation Of New Plastered Surfaces Of And Applying Two Coats Of Cement Base Paint Complete All As Specified , M&L For Second Class Hard Wood Timber - M&L For Second Class Hard Wood Timber Framed And Fixed Clen Sawn Such As, Roof Purlins, Rafters, Fillets Ridges, Battens Etc Complete All As Specified And Directed . Vertical Member L = 0.4 +0.2+1.35+0.45 = 2.4, 2 Nos Horizontal Member = 3 Nos L=2.4 M Sec (75X75) Horizontal Member = 1 Nos L=2.4M Sec (75X100) For Rafter And Purlin L =0.90M Nos =4 Nos Section (75 X 100) Noslwhtqty 4 2.40.1 0.10.096 6 2.40.075 0.075 0.081 2 2.40.1 0.075 0.036 8 0.90.1 0.075 0.054 0.267 , M&L 0.63Mm Galavanised - M&L 0.63 Mm Galvanised, Corrugated Mild Steel Sheeting With Two Corrugations Side Lap, Fixed With J Or L Type Hook With Washers, In Roofs, Walls Etc With Grade Of Zinc Coating 275.Complete All As Specified And Directed. Noslwhtqty 4 2.55 0.71 7.24 7.24 , M&L 0.63Mm Plain - M&L 0.63 Mm Plain, Galvanised, Mild Steel Sheeting, In Ridges, Hips, Valley Gutters, Drip And Straight Flashings (Length And Girth As Fixed)With Two Corrugations Side Lap, Fixed With J Or L Type Hook With Washers, In Roofs, Walls Etc With Grade Of Zinc Coating 275.Complete All As Specified And Directed. Noslwhtqty 22.55 0.25 1.28 1.28 , Returning, Filling In - Returning, Filling In Including Spreading Leveling Watering And Well Ramming In Layers N Exc 25Cm Complete All As Specified And Directed. Qty Total Excn 2.276 Pcc 1:4:8-0.201 Bk Work Upto Gl-1.512 Total0.563 Deduct 10%-0.056 0.507 , Removing Excavated Material - Removing Excavated Material N Exc 50 M And Depositing Where Directed At A Level N Exc 1.5M Above The Starting Point Complete All As Specified And Directed. Total Excn2.276 Rfr-0.507 1.769 , M&L For Preparation Of New Wooden Surfaces Over 10 Cm - M&L For Preparation Of New Wooden Surfaces Over 10 Cm Width Or Girth And Applying Two Coats Or Synthetic Enamel Paint Over One Coat Of Pink Primer Complete All As Specified. Vertical Member L =0.4+0.2+1.35+0.45 =2.4 Girth =4*0.1=0.4 Horizontal Member = 3 Nos I=2.4 Sec (75X75) Horizontal Member = 1 Nos I=2.4 M Sec (75X100) For Rafter And Purlin I=0.90 M Nos =4 Nos Section (75X100) Nosl Girthqty 41.80.4 2.276 62.40.3 4.320 22.40.35 1.680 8 0.9 0.35 2.520 11.400 , Ms Steel For Hook And Base Plates - Ms Steel For Hook And Base Plates Complete All As Specified And Directed Base Plate (175X175x10mm) 16 Mm Hook L=0.25 Total 8 Nos Nosl Girthqty 20.1750.1750.061 @ 78.5 Kg/Sqm 78.500 4.808(A) 16 0.254.000 @ 1.58 Kg/M 1.580 6.320(B) Grand Total (A) + (B) 11.13Kg , M&L For Preparation Of New Steel Surface - M&L For Preparation Of New Steel Surface Of Any Description Over 10Cm Width Or Girth And Applying Two Coat Of Synthetic Enamel Paint Over One Coat Of Red-Oxide Primer Complete All As Specified. Ref Item No 77.242 Ref Item No 81.280 Total 8.522 Add 14% For Corrugation 1.193 G. Total 9.72 , Dunnage Block - M&L For Ms Tmt Bars 10 Mm Dia And Over Cut To Length, Bent To Shape Required, Including Cranking Bending Spirally For Hooping For Columns, Hooking Ends And Binding With And Including Mild Steel Wire (Annealed) Not Less Than 0.9 Mm Dia Or Securing With Clips Quality Conforming To Complete All As Specified And Directed. Dunnage Block Size = 450X300x100mm L=0.45-2X0.04=0.37M Nos Or Bar = 04 Nos Of Dunnage = 5000 10Mm Dia Tmt Bar , Tmt Bars - M&L Tmt Bars 5 To 8Mm Dia And Over, Cut To Length, Bent To Shape Required, Inculding Cranking, Bending Spirally For Hooping For Columns, Hooking Ends And Binding With Including Mild Steel Wire (Annealed) Not Less Than 0.9Mm Dia As In Stirrups Complete All As Specified And Directed. L=2X0.3+2X0.1-4X0.025+2*0.04=0.78M Nos Of Stirrups = 0.37/0.125+1=4 Nos Nos Of Dunnage = 5000 , Precast Reinforced Cement Concrete - Providing Precast Reinforced Cement Concrete Type B-1, 1:2:4 (20Mm Graded Aggregate) As In Dunnage Complete All As Specified And Directed. Size = 0.45X0.30X0.10M , Excavation In Trenches 1.5M - Excavation In Trenches N Exc 1.5M Wide And N Exc 1.50M In Depth For Foundation Etc Or For Shaft Wells, Cesspits Manholes Pier Holes Etc N Exc 10 Sqmm On Plan And N. Exc 1.5M In Depth And Getting Out In Any Type Of Soil Complete All As Specified And Directed. Size Of Excn = 1.30X0.56X0.45 Noslwhtqty 11.3 0.560.450.328 , M&L Pcc 1:4:8 Type D2 - M&L Pcc 1:4:8 Type D2 (40Mm Graded Aggregate) As In Foundations, Filling And Mass Concrete Complete All As Specified And Directed. Noslwhtqty 11.3 0.560.0750.055 , M&L Brick Work With Old Size Sub Class B Brick - M&L Brick Work With Old Size Sub Class B Brick Straight Or Curved On Plan Exc 6 M Mean Radius Built In Cement Mortar In Cm 1:6 Complete All As Specified And Directed. Noslwhtqty Upto Gl11.3 0.560.0750.055 Above Gl1 1.2 0.3451.20.497 10.60.230.6 0.083 0.787 , M&L Rendering 10Mm Thick In Cement Plaster 1:4 - M&L Rendering 10Mm Thick In Cement Plaster 1:4 On Fair Faces Of Brick Work Or Concrete Surfaces Finshed Even And Smooth Without Using Extra Cement Complete All As Specified And Directed. Nos Lw Ht Qty 21.21.2 2.880 21.2 0.345 0.828 21.2 0.0570.137 21.20.6 1.440 20.230.6 0.276 11.20.23 0.276 5.84 , M&L For Preparation Of New Plastered - M&L For Preparation Of New Plastered Surfaces Of Any Description Over 10 Cm Width Or Girth And Applying Two Coat Of Synthetic Enamel Paint Complete All As Specified. , Returning, Filling In Incl Spreading - Returning, Filling In Including Spreading Leveling Watering And Well Ramming In Layers N Exc 25Cm Complete All As Specified And Directed. Qty Total Excn0.328 Pcc 1:4:8 -0.055 Bk Work Upto Gl -0.207 Total0.066 Deduct 10%-0.007 0.059 , Removing Excavated Material N Exc 50 M - Removing Excavated Material N Exc 50 M And Depositing Where Directed At A Level N Exc 1.5M Above The Starting Point Complete All As Specified And Directed. Total Excn0.328 Rfr-0.059 0.268 Total Quantity : 13. Last date of submission for this tender is 2022-01-04. This is a Wrenches And Drivers tender in Budgam, Jammu And Kashmir