Indian Army

Indian Army has published Supply Of Fd Defence Store For Arty Gun Pits The Work Constitutes Supply Of Store Of Fd Defences For Arty Gun Pits Including Hiring Of Plants For Required Work At The Delivery Locations Mentioned In Rfp Within 60 Days , Built-Up Steel Section Of Size 300Mm X 150Mm X 4Mtr Length With Min Weight 46 Kg Per Mtr With Tolerance (-) 2% To (+)5% (Total Weight 184Kg Per Piece), Fabricated From Is 2062 E250 Grade Structural Steel, Welded As Per 816/ Is 822, With Continuous Weld Free From Defects, Dimensional Tolerance As Per Is 7215, Surface Cleaned To Sa 2.5 And One Coat Red Oxide Primer Min 30 Micron Dft Complete With All Material Test Certificate, Weight Verification Certificate, Welding Quality Assurance Report, Dimensional Inspection Report. Make: Tata/Rinl/Sail/Jindal/Jsw Or Equivalent As Approved. , Built-Up Steel Section Of Size 200Mm X 100Mm X 9.4Mtr Length With Min Weight 24.2 Kg Per Mtr With Tolerance(-) 2% To (+)5% (Total Weight 227.48Kg Per Piece), Fabricated From Is 2062 E250 Grade Structural Steel, Welded As Per 816/ Is 822, With Continuous Weld Free From Defects, Dimensional Tolerance As Per Is 7215, Surface Cleaned To Sa 2.5 And One Coat Red Oxide Primer Min 30 Micron Dft Complete With All Material Test Certificate, Weight Verification Certificate, Welding Quality Assurance Report, Dimensional Inspection Report. Make: Tata/Rinl/Sail/Jindal/Jsw Or Equivalent As Approved. , Ismb 200X100mm X 8 M Minimum Weight 24.2Kg/M With Tolerance (-) 2% To (+)5% (Total 193.6Kg Per Piece) Including Two Coats Of Synthetic Enamel Paint Over A Coat Of Red Oxide Primer. Make: Tata/Rinl/Sail/Jindal Or Equivalent To Is 808-1989 , Mild Steel Base Plate, Size 450Mm X 450Mm X 16Mm Thick, Fabricated From Is 2062 E250 Grade Structural Steel, Cut With Cnc/Gas Cutting Machine, Edges Free From Notches And Burs, With Hole Drilling (Bolt Holes) Weight Approximately 25.5 Kg Per Plate, Surface Cleaned To Sa 2.5 And One Coat Of Primer Applied (Minimum 30 Micron Dft) Supplied Complete With Mtc, Dimensional And Weight Verification Report Proper Making And Safe Transportation. Make: Tata/Rinl/Sail/Jindal Or Equivalent To Is 808-1989 , Mild Steel Top Plate, Size 300Mm X 300Mm X 12Mm Thick, Fabricated From Is 2062 E250 Grade Structural Steel, Cut With Cnc/Gas Cutting Machine, Edges Free From Notches And Burs, With Hole Drilling (Bolt Holes) Weight Approximately 8.5 Kg Per Plate, Surface Cleaned To Sa 2.5 And Applied With One Coat Of Primer (Minimum 30 Micron Dft) Supplied Complete With Material Test Certificate, Dimensional And Weight Verification Proper Making And Safe Transportation. Make: Tata/Rinl/Sail/Jindal Or Equivalent To Is 808-1989 , Structural Steel Bracing Members Of Size 26Mm Dia Round Bar X 2700Mm Length, Fabricated From Is 2062 E250 Grade Steel Free From Bends And Defects, Weight Approx 11.3 Kg Per Piece Surface Cleaned To Sa 2.5 Standard And Applied With One Coat Of Primer (Min 30 Micron Dft) Supplied Complete With Material Test Certificate, Dimensional And Weight Verification Reports. Make: Tata/Rinl/Sail/Jindal Or Equivalent To Is 808-1989 , Bracing Support Block Sh8 Of Size 100Mm X 100Mm X 1.4Mtr X 5Mm Thick, Fabricated From Is 2062 E250 Grade Steel, Fully Welded Box Section With Continuous Seam Welding Cut By Cnc/Gas Cutting Edges Smooth And Free From Defects, Weight Approximately 21Kg Per Piece, Surface Cleaned To Sa 2.5 Standard And Coated With Primer (Minimum 30 Micron Dft) Complete With Material Test Certificate, Dimensional Verification And Weight Certificate , Bracing Cleat Plates Of Size 150Mm X150mm X 5Mm Thick, Fabricate Fabricated From Is 2062 E250 Grade Steel, Cut By Cnc/Gas Cutting Edges Smooth And Free From Defects, Weight Approximately 0.88Kg Per Piece, Surface Cleaned To Sa 2.5 Standard And Coated With Primer (Minimum 30 Micron Dft) Complete With Material Test Certificate, Dimensional Verification And Weight Certificate , Connection Plate Size 300Mm X 300Mm X 12Mm Thick, Fabricated From Is 2062 E250 Grade Steel, Cut By Cnc/Gas Cutting Edges Smooth And Free From Defects, Weight Approximately 8.5 Kg Per Plate, Surface Cleaned To Sa 2.5 Standard And Coated With Primer (Minimum 30 Micron Dft) Complete With Material Test Certificate, Dimensional Verification And Weight Certificate , Foundation Bolts, Size 25Mm Dia X 915Mm Long, Fabricated From Is 2062 E250 Grade Mild Steel, Threads As Per Is 4218, Complete With Nuts And Washers, Conforming To Is 1367, Edges Smooth And Burr-Free, Weight Approximately 3.5 Kg Per Piece, Surface Cleaned And Applied With Rust Preventive Oil/ Primer/ Galvanizing As Specified Complete With Test Certificates, Dimensional And Weight Verification Reports , Hexagonal Nut And Bolt Assembly, Size M16 X 25Mm Long, Fabricated As Per Is 1367 Property Class 8.8, Iso Metric Threads As Per Is 4218, Complete With Matching Hexagonal Nuts As Per Is 1363/ Is 1367, Weight Approximately 0.09 Kg Per Assembly, Surface Finish Zinc Plated/ Hot Dip Galvanised As Applicable Complete With Material Test Certificate, Dimensional And Weight Verification And Coating Thickness Report , Ldpe Film : Ldpe Film Shall Contain Not Less Than 2.0% Of Carbon Black Of An Average Particle Size 300 Micron, 4 Ft Wide And Sufficient Adhesive Of Fixing. Make : Silpaulin/ Supreme (Colour Og/Black) Or Equivalent To Is 2508-1984. , Crane And Jcb Work (Hiring Of 1 X Crane And 1 X Jcb Including Fuel And Driver) For Required Digging Work, Lifting, Stacking, Placing Of Store And Necessary Assemble Work At Work Site As Per Job Requirement. Last date of submission for this tender is 2025-08-12. This is a Ammunition tender in Rajouri, Jammu And Kashmir