Indian Army

Indian Army has published Procurement Of Anti Intrusion Perimeter Fence Stores / Items For Operational Works For Fy 2020-21-Weld Mesh Panels. Should Produced By Electrical Resistance Welded Galvanized Wires And Subsequently Powder Coated As Per Below Spec. Mesh Wire : Horizontal Wire, Dia 4.0 Mm ( + / - 0.05Mm ) : Vertical Wire, Dia 4.0 Mm ( + / -0.05Mm ) Mesh Size: Mesh Size Of 12.7 X 76.2 Mm Along Mesh ( Mesh Wire: Is 280 2006 ) . Panel Size : 2667X955mm Weight : .90 To 24.05 Kg. Metallic Coating : The Wires Should Be Galvanized And The Min Zinc Weight For The Horizontal And Vertical Wires Is Zinc Coated, 40 To 50 Gsm, Powder Coating : The Panels Are After Welding Subsequently Polyester Powder Coated, Layer Have A Thickness Of 60 To 80 Microns. Colour : Ral 6005 Powder Coating Should Withstand 1000 Hours Of Salt Spray Test ( Type Test Certificate To Be Provided ) . Wire Tensile Strength : Min 550 N / Sq.Mm. Weld Strength: The Average Weld Shear Strength Of 4 Welds Taken At Random Shall Not Be Less Than 50 % Of The Breaking Strength Of The Vertical Wire Note : High Security Weld Mesh Is Been Installed At The Bottom. Ref Drawing No : 269 Engr Regt : Nya / 20-21 / Aipf Sheet 1 / 3 ( Sketch-P ) . Material: Ms. Mesh Wire: Dia:4Mm : Is 280 2006. Coating : Is 4826 – 1979.Weld Mesh As Per : En 10223-7 ) , En 10245-1. ( 1200 Nos Per Km ) ( Delivery At Sonmarg ( J&K ) ) , Omega Clamp. Omega Clamps With Profile Cover Plate To Tighten The Mesh Panel Along The Post With 76Mm Dia, 35Mm Width, 3 Mm Thickness. ( Ms Strip As Per Is 1730 ) Ref Drg No 269 Engr Regt Nya / 20-21 / Aipf Sheet 1 / 2 ( Sketch-Q & R ) . Coating: Hot Dip Galvanized To Minimum 350 Gsm As Per Is 2629 / Is 4759 / Astm A 123. ( 2800 Nos Per Km ) ( Delivery At Sonmarg ( J&K ) ) , Mushroom Head Bolt Nut With Washer. Each Clamps Will Be Supplied With A Pair Of Ss 304 Mushroom Headed, Square Necked Bolts And Security Nuts M8 X 50 ( Is:8535-1987 ) . Washer Specification Material: Ss 304, Od : 15.89Mm, Id : 8.38 Mm, Thickness ; 2.04Mm ( 5600 Nos Per Km ) . ( Delivery At Sonmarg ( J&K ) ) N. Last date of submission for this tender is 2020-06-15. This is a Cutting Crimping And Punching Tools tender in 269 Engineer Regiment, Budgam, Jammu And Kashmir, Jammu And Kashmir