Himachal Pradesh State Electricity Board

Himachal Pradesh State Electricity Board has published Tender For Supply Of Equipment / Material, Design, Erection, Testing, Commissioning, Forprovidingsop To Govt. Polytechnic Building At Jandhour Uesd Sansarpur Terrace. - 1 11 KV HT LINE 2 Prov. AAAC 7/3.15 mm 3 Prov. ST Pole 9 Mtr.W/L 200 Kgf/m4 4 Prov. RCC Muff with concerete filling 5 Prov.X-arm-Channel Iron 100x50x6,Length 1270mm i/c tolerance of 100 mm either side) xStr. 6 Prov.Angle Iron 50x50x6,Length 750mmx2 No. xStr.) 7 Prov. Pole Top Bracket (MSCI:100x50x6 mm- 100 mm) 8 Prov. 11 KV Pin Insulators (Porcelain,12kV,10 KN): 3 No per str. 9 Prov.Belt Set -MS Angle Iron 50x50x6,Length(1800mmx2 No.)x Str. 10 Prov. X- Bracing Set MS Angle Iron 50x50x6,Length(2125mmx2 No.)x Str. 11 Prov.X-arm ( Horizontal) -MS Channel Iron 100x50x6,Length 2340mm x 2 Nos. (?Formation)x Str. 12 Prov. Disc Insulator Sets on Dead End Str.(comprising 1 No. Disc: (Porcelain,BS,12 KV,90 kN) incl Dead End Clamps etc.) x (3 Nos. cond) x (2 No. sides) 13 Prov. 11 KV Pin Insulators (Porcelain,12kV,10 KN): 3 No per str. 14 Prov. Stay Set Complete in all respect 15 Prov. Stay Wire(7/3.15 mm) 16 Prov. HT Earthing set complete 17 Prov. Single continous Earth wire (G.I,8 SWG) 18 Prov. Eye Hook for earth wire 19 Prov. Earth wire clamp 20 Prov.MS C.I. (75X40X6),Length 2400mm 21 Prov. G.O Switch 22 Prov. D.O Fuse Unit 23 Prov.Half Clamps 24 Prov. Full Clamps 25 Prov. Danger Plate (250X200X1.6mm) 26 Prov. M.S. Nuts And Bolts Off Sizes 27 Prov. Barbed Wire 28 Prov. Red Oxide 29 Prov. Aluminium Paint 30 AddErection Charges 31 11/.4KV 250 KVA TRANSFORMER 32 Prov.11/.4KV Distribution Transformer 250 KVA 33 Prov. T/F Bed ( Civil Work) 34 Prov. Chain Link Fencing Angle Iron Gate etc. for transformer fencing 35 Prov. Pipe Earthing 36 Prov. LT Cable 3.5 core 185mm sq 37 Prov Alluminium Thimbles 38 Prov. Barwed Wire 39 Prov. Danger Plate 40 Add ErectionCharges 41 11KV Metering Equipment ( Outdoor Type) 42 Prov. CT/PT Combined Unit (PT:11KV/110V)(CT:10-400/5Amp) 43 Prov. 3-Ph, 3/4-wire CT-PT operated statictrivector meter DLMS Compliant 44 PVC Multistrand copper wire with 1inch dia G.I Pipe for concealing 45 Prov. S/T Pole 9 Mtr Long 46 Prov. RCC Muff with concrete filling 47 Prov. C.I (2800x100x50x6mm) 48 Prov. C.I X-arm (2800x75x40x6mm)x4 No for supporting DO fuse unit & G.O switch 49 Prov. C.I X-arm (460x100x50x6mm)x2 No for supporting main channel of CT-PT unit 50 Prov. M.S A.I X-arm( 2800x50x50x6mm)x1 for LA 51 Prov. M.S A.I X-arm( 2800x50x50x6mm)x4 52 Prov. M.S A.I X-arm( 460x35x35x5mm)x2 53 G.O AB Switch Unit ( 11KV 400Amps) 54 Prov.D.O Fuse Unit 55 Prov. lightning Arrestor (Porcelin Type) 56 Prov. Disc Insulator with fitting 57 Prov.HT Stay Set Complete 58 Prov. Stay wire 7/3.15mm 59 Prov. Pipe Earthing Set 60 Prov. M.S Flat Iron Full Clamp 61 Prov. M.S Flat Iron Half Clamp 62 Prov. Nuts & Bolt Off size 63 Prov. aluminiumThimble 64 Prov. aluminiumThimble 65 Prov. Danger Plate 66 Prov. Barbed Wire 67 Prov.Aluminium Paint 68 Prov.Red Oxide 69 Add Erection Charges 70 Quantities are mentioned above are tentative and Actual Quantity shall be worked out after Check Survey to be carried out by the successful Tender and detailed Engineering and finalization of Tower location Chart.Payment shall be made as per Approved Bill of Material/Actual Quantities measured at site. . Last date of submission for this tender is 2023-05-19. This is a Bolts tender in Kangra, Himachal Pradesh