Himachal Pradesh State Electricity Board

Himachal Pradesh State Electricity Board has published Tender for (A) Supply Part-11/.4 Kv 400 Kva Distribution Sub Station , 11/.4 Kv 400Kva Dtr (Rec Sep. Ord 11/1976 , providing St Pole Pole 9 Mtr. Long W/L 220Kgs , Muff For Steel Tubular Pole With Concrete Filling , X-Arm: [Channel Iron (100X50x5 Mm), Length : 2800 Mm X 2 Nos] For Incomer Line , Ms A.I.(50X50x6 Mm), Length: 2800 Mm X(1 Nos For Las ) , X-Arm: [Channel Iron (75X40x5 Mm), Length : 2800 Mm X 4 Nos] For Supporting Do Fuse Unit & Go Switch , X-Arm: [Channel Iron (100X50x6 Mm), Length : 2800 Mm X 2 Nos] For Transformer Bed , X-Arm [Channel Iron (100X50x6 Mm), Length : 460 Mm X 2 Nos For Supporting Main Channel Of Transformer] , Ms A.I.(50X50x6 Mm), Length: (2800 Mm) X 2 No. , Ms Angle Iron (35X35x5 Mm), Length : 460 Mm X 2 Nos , Ms A.I.(50X50x6 Mm), Length: (950 Mm) X 2 Nos. Of Bed Knee Bracing , Ms Angle Iron (50X50x6 Mm), Length : (2800 Mm) X2 Nos For Transformer Lt Distribution Box And G.O Switch Fixing Assembly , G.I. Wire For Earthing , Ms Angle Iron (50X50x6 Mm), Length : (450 Mm)X1 Nos For Transformer Lt Distribution Box And G.O Switch Fixing Assembly , G.O. Switch Handle Supporting: [C.I. (75X40x6mm), Length: 460Mm For Transformer Lt Distribution Box And G.O Switch Fixing Assembly , G.O Ab Switch Unit (11Kv,400,663Ka) Tripple Pole O/D Type , D.O Fuse Unit , Surge Arrester, 9 Kv Station Class , Discs Insulator Sets (Comp. 1 No. Disc: ^^(Porcelain, Bs, 12 Kv, 90 Kn) I/C Dead End Clamps Etc.) , Stay Set Complete , Stay Wire (7/3.15Mm)( 10 Kg Per Stay Set) , Pipe Earthing With Gi,Charcoal & Salt , providing Lt Distribution Panel With Acb (630 A, 50 Ka, 4P,1 No.) & Sfu (100 A 6 No. Rewireble) For 400Kva Trf. As Per Specification , Half Clamp (M.S. Flat 50X6) , Full Clamps (M.S. Flat 50X6) , M. S. Nuts & Bolts Off Sizes (Galvanised Coated) [Prefarably 16Mm Ø Or More (With Flat And Spring Washer) , Aluminium Thimbles 300 Mm Sq. , Copper Thimble 95 Mm Sq. , Danger Plate , Barbed Wire (Rec Sp F 3/1981) , Lt Cable 3-1/2 Core-400 Mm Sq.For Incomer , Lt Cable 3-1/2 Core-185Mm Sq.X6 O/G , Alluminium Paint , Prov.Acsr, 6/1/3.35 Mm , Chain Link Fencing , Angle Iron, Gate Etc. For Transfromer Fencing , providing Transformer Bed Plinth For 1X400kva S/Stn Structure Complete With cement concrete 1:6:12 R.R. Massonery & Plastering Etc. A/W Chain Link Fencing, Angle Iron Gate Etc. For Dtr Fencing. , Lt Switched Capacitors 50 Kvar For 400 Kva T/F , Hp Monochrome Laser Printer (A4) Hp Laser 108A With Prints Up To 20 Ppm, 64 Mb Ram 600X600 Dpi Print Resolution 150 Sheets Paper Tray Caapcity Usb 2.0 Port -One Year Warranty , (A) Erection Part-11/.4 Kv 400 Kva Distribution Sub Station , 11/.4 Kv 400Kva Dtr (Rec Sep. Ord 11/1976 , providing St Pole Pole 9 Mtr. Long W/L 220Kgs , Muff For Steel Tubular Pole With Concrete Filling , X-Arm: [Channel Iron (100X50x5 Mm), Length : 2800 Mm X 2 Nos] For Incomer Line , Ms A.I.(50X50x6 Mm), Length: 2800 Mm X(1 Nos For Las ) , X-Arm: [Channel Iron (75X40x5 Mm), Length : 2800 Mm X 4 Nos] For Supporting Do Fuse Unit & Go Switch , X-Arm: [Channel Iron (100X50x6 Mm), Length : 2800 Mm X 2 Nos] For Transformer Bed , X-Arm [Channel Iron (100X50x6 Mm), Length : 460 Mm X 2 Nos For Supporting Main Channel Of Transformer] , Ms A.I.(50X50x6 Mm), Length: (2800 Mm) X 2 No. , Ms Angle Iron (35X35x5 Mm), Length : 460 Mm X 2 Nos , Ms A.I.(50X50x6 Mm), Length: (950 Mm) X 2 Nos. Of Bed Knee Bracing , Ms Angle Iron (50X50x6 Mm), Length : (2800 Mm) X2 Nos For Transformer Lt Distribution Box And G.O Switch Fixing Assembly , G.I. Wire For Earthing , Ms Angle Iron (50X50x6 Mm), Length : (450 Mm)X1 Nos For Transformer Lt Distribution Box And G.O Switch Fixing Assembly , G.O. Switch Handle Supporting: [C.I. (75X40x6mm), Length: 460Mm For Transformer Lt Distribution Box And G.O Switch Fixing Assembly , G.O Ab Switch Unit (11Kv,400,663Ka) Tripple Pole O/D Type , D.O Fuse Unit , Surge Arrester, 9 Kv Station Class , Discs Insulator Sets (Comp. 1 No. Disc: ^^(Porcelain, Bs, 12 Kv, 90 Kn) I/C Dead End Clamps Etc.) , Stay Set Complete , Stay Wire (7/3.15Mm)( 10 Kg Per Stay Set) , Pipe Earthing With Gi,Charcoal & Salt , providing Lt Distribution Panel With Acb (630 A, 50 Ka, 4P,1 No.) & Sfu (100 A 6 No. Rewireble) For 400Kva Trf. As Per Specification , Half Clamp (M.S. Flat 50X6) , Full Clamps (M.S. Flat 50X6) , M. S. Nuts & Bolts Off Sizes (Galvanised Coated) [Prefarably 16Mm Ø Or More (With Flat And Spring Washer) , Aluminium Thimbles 300 Mm Sq. , Copper Thimble 95 Mm Sq. , Danger Plate , Barbed Wire (Rec Sp F 3/1981) , Lt Cable 3-1/2 Core-400 Mm Sq.For Incomer , Lt Cable 3-1/2 Core-185Mm Sq.X6 O/G , Alluminium Paint , Prov.Acsr, 6/1/3.35 Mm , Chain Link Fencing , Angle Iron, Gate Etc. For Transfromer Fencing , providing Transformer Bed Plinth For 1X400kva S/Stn Structure Complete With cement concrete 1:6:12 R.R. Massonery & Plastering Etc. A/W Chain Link Fencing, Angle Iron Gate Etc. For Dtr Fencing. , Lt Switched Capacitors 50 Kvar For 400 Kva T/F , Hp Monochrome Laser Printer (A4) Hp Laser 108A With Prints Up To 20 Ppm, 64 Mb Ram 600X600 Dpi Print Resolution 150 Sheets Paper Tray Caapcity Usb 2.0 Port -One Year Warranty , (B) Supply Part-Ct/Pt Unit 400 Kva Trf. (1 Nos.) , providing 11Kv Ct-Pt Unit Ct/Pt Combined Unit 11 Kv /110V 50/5 A , Prov, Energy Meter (3 Phase, 4 Wire) Ht Ct Type For Above , Pvc Multistrand 2.5 Mm Sq. Copper Wire , 1 Inch Dia Gi Pipe For Concealin , Bend Joints /Elbow , X-Arm: [Channel Iron (75X40x6 Mm), Length : 2800 Mm X 2 Nos] For Supporting Main Channel For Ct-Pt Unit , Ms Angle Iron (50X50x5 Mm), Length : 2800Mmx 4 Nos. , Ms Angle Iron (35X35x5 Mm), Length : 2800Mmx 2 Nos. , Half Clamp (Ms Flat 50X6 Mm) , Full Clamp (Ms Flat 50X6 Mm) , Nut & Bolts Off Size , Aluminium Thimble , Copper Thimble , (B) Erection Part-Ct/Pt Unit 400 Kva Trf. (1 Nos.) , providing 11Kv Ct-Pt Unit Ct/Pt Combined Unit 11 Kv /110V 50/5 A , Prov, Energy Meter (3 Phase, 4 Wire) Ht Ct Type For Above , Pvc Multistrand 2.5 Mm Sq. Copper Wire , 1 Inch Dia Gi Pipe For Concealin , Bend Joints /Elbow , X-Arm: [Channel Iron (75X40x6 Mm), Length : 2800 Mm X 2 Nos] For Supporting Main Channel For Ct-Pt Unit , Ms Angle Iron (50X50x5 Mm), Length : 2800Mmx 4 Nos. , Ms Angle Iron (35X35x5 Mm), Length : 2800Mmx 2 Nos. , Half Clamp (Ms Flat 50X6 Mm) , Full Clamp (Ms Flat 50X6 Mm) , Nut & Bolts Off Size , Aluminium Thimble , Copper Thimble , (C) Supply Part-New Ht Line (2.43 Kms. With Acsr 6/1/3.35 Mm Sq. On Steel Poles , Acsr 6/1/3.35 (Rabbit) {Includes 3 Conductor Lengths For 3Φ And Additional 1% (Sag, Jumpering And Wastage} , providing St Pole Pole 11 Mtr. Long W/L 227 Kgs/M2 (With Ruling Span 90M, 8 No. Run Through And 3 No. Double Pole Dead End Structure , providing St Pole Pole 9 Mtr. Long W/L 200 Kgs , Muff For Steel Tubular Pole (2000Mm Long) With Concrete Filling , Cross Arm: [Channel Iron (100X50x6 Mm), Length 1270 Mm (I/C Tolerence Of 100Mm Either Side) X2 Structure( Run Through Structure (Formation Tringle) , Angle Iron (50X50x5 Mm), Length (2X750) Mm X 1 Structures (Run Through Structure (Formation Tringle) , Pole Top Bracket [Msci:100X50x6mm-100Mm] , 11 Kv Pin Insulators (Porcelain, 12 Kv, 10 Kn): 3 No Per Pole Structure (Run Through Structure (Formation Tringle) , Belt Set - Ms Angle Iron: 50X50x6, Length [1800 Mm X 2 No.]For Dead End Structures , X-Bracing Set - Ms Angle Iron: 50X50x6, Length [2125 Mm X2 No.] For Dead End Structures , X-Arm(Horizental) - Ms C. Iron: 50X50x6, Length [2340 Mm X2 No.]For Dead End Structures , Discs Insulator Sets On Dead End Structures (Comprising 1 No. Disc: ^^(Porcelain, Bs, 12 Kv, 90 Kn) Including Dead End Clamps Etc.) X (3 No. Conductors) X (2 No. Sides)For Dead End Structures , 11 Kv Pin Insulators (Porcelain, 12 Kv, 10 Kn): 3 No Per Pole Structure For Dead End Structures , Stay Set Complete In All Respect I/C Clamp ( Single Pole-1No. , /D. Pole Structures-4Nos.) , Stay Wire (7/3.15 Mm) (9.0 Kg Per Stay Set) , G.I. Wire , Eye Hook For Earth Wire , Earth Wire Clamp , Ht Earthing Set Complete (Rec construction Standared J-1) , Half Clamp (On D/P Dead End Str:2Nos. On T/P Dead End String 1 Nos ; On Run Through Strengthening 3Nos.) , Full Clamp (On D/P Dead End Str:2Nos. On T/P Dead End String 1 Nos ; On Run Through Strengthening 3Nos.) , Danger Plate (250X200x1.6 Mm) , M. S. Nuts & Bolts Off Sizes (Galvanised Coated) [Prefarably 16Mm Ø Or More (With Flat And Spring Washer) , Barbed Wire (Rec Sp F 3/1981) , G.O Ab Switch Unit (11Kv,630 A,25Ka) , D.O Fuse Unit , M.S. C.I. 2400 Mm For Road Crossing (75X40x6mm) , Alluminium Paint , (C) Erection Part-New Ht Line (2.43 Kms. With Acsr 6/1/3.35 Mm Sq. On Steel Poles , Acsr 6/1/3.35 (Rabbit) {Includes 3 Conductor Lengths For 3Φ And Additional 1% (Sag, Jumpering And Wastage} , providing St Pole Pole 11 Mtr. Long W/L 227 Kgs/M2 (With Ruling Span 90M, 8 No. Run Through And 3 No. Double Pole Dead End Structure , providing St Pole Pole 9 Mtr. Long W/L 200 Kgs , Muff For Steel Tubular Pole (2000Mm Long) With Concrete Filling , Cross Arm: [Channel Iron (100X50x6 Mm), Length 1270 Mm (I/C Tolerence Of 100Mm Either Side) X2 Structure( Run Through Structure (Formation Tringle) , Angle Iron (50X50x5 Mm), Length (2X750) Mm X 1 Structures (Run Through Structure (Formation Tringle) , Pole Top Bracket [Msci:100X50x6mm-100Mm] , 11 Kv Pin Insulators (Porcelain, 12 Kv, 10 Kn): 3 No Per Pole Structure (Run Through Structure (Formation Tringle) , Belt Set - Ms Angle Iron: 50X50x6, Length [1800 Mm X 2 No.]For Dead End Structures , X-Bracing Set - Ms Angle Iron: 50X50x6, Length [2125 Mm X2 No.] For Dead End Structures , X-Arm(Horizental) - Ms C. Iron: 50X50x6, Length [2340 Mm X2 No.]For Dead End Structures , Discs Insulator Sets On Dead End Structures (Comprising 1 No. Disc: ^^(Porcelain, Bs, 12 Kv, 90 Kn) Including Dead End Clamps Etc.) X (3 No. Conductors) X (2 No. Sides)For Dead End Structures , 11 Kv Pin Insulators (Porcelain, 12 Kv, 10 Kn): 3 No Per Pole Structure For Dead End Structures , Stay Set Complete In All Respect I/C Clamp ( Single Pole-1No. , /D. Pole Structures-4Nos.) , Stay Wire (7/3.15 Mm) (9.0 Kg Per Stay Set) , G.I. Wire , Eye Hook For Earth Wire , Earth Wire Clamp , Ht Earthing Set Complete (Rec construction Standared J-1) , Half Clamp (On D/P Dead End Str:2Nos. On T/P Dead End String 1 Nos ; On Run Through Strengthening 3Nos.) , Full Clamp (On D/P Dead End Str:2Nos. On T/P Dead End String 1 Nos ; On Run Through Strengthening 3Nos.) , Danger Plate (250X200x1.6 Mm) , M. S. Nuts & Bolts Off Sizes (Galvanised Coated) [Prefarably 16Mm Ø Or More (With Flat And Spring Washer) , Barbed Wire (Rec Sp F 3/1981) , G.O Ab Switch Unit (11Kv,630 A,25Ka) , D.O Fuse Unit , M.S. C.I. 2400 Mm For Road Crossing (75X40x6mm) , Alluminium Paint , (D) Supply Part-Three Phase Lt Line With Aaac 6/1/3.35 Mm Sq. On Steel Poles(0.830 Km) 3-Phase 4 Wire Double Circuit Line , Acsr 6/1/3.35 (Rabbit) {Includes 3 Conductor Lengths For 3Φ And Additional 1% (Sag, Jumpering And Wastage} , providing St Pole Pole 9 Mtr. Long W/L 200 Kgs , Muff For Steel Tubular Pole , Shackle Insulators (16Kn) (Recd-3/761)(Iss No 1445/1977) , D-Iron (U-Clamp) (Recd-4/79)(Iss No 7935/1975) , Lt Saty Set Complete Rec No 31/1983 , Stay Wire (7/3.15 Mm) (8.0 Kg Per Stay Set) , providing Full Clamp , Earthing Set , G.I.Wire No 8 Swg Earth Wire 1.03Km (Sep.G-2/72) For Suporting Cable , M.S.Nuts & Bolt Off Sizes , C.I. 75X40x6mm (Length 2400X2 Mm) For Centilever Double Circuit Line , Aluminium Paint , (D) Erection Part-Three Phase Lt Line With Aaac 6/1/3.35 Mm Sq. On Steel Poles(0.830 Km) 3-Phase 4 Wire Double Circuit Line , Acsr 6/1/3.35 (Rabbit) {Includes 3 Conductor Lengths For 3Φ And Additional 1% (Sag, Jumpering And Wastage} , providing St Pole Pole 9 Mtr. Long W/L 200 Kgs , Muff For Steel Tubular Pole , Shackle Insulators (16Kn) (Recd-3/761)(Iss No 1445/1977) , D-Iron (U-Clamp) (Recd-4/79)(Iss No 7935/1975) , Lt Saty Set Complete Rec No 31/1983 , Stay Wire (7/3.15 Mm) (8.0 Kg Per Stay Set) , providing Full Clamp , Earthing Set , G.I.Wire No 8 Swg Earth Wire 1.03Km (Sep.G-2/72) For Suporting Cable , M.S.Nuts & Bolt Off Sizes , C.I. 75X40x6mm (Length 2400X2 Mm) For Centilever Double Circuit Line , Aluminium Paint. Last date of submission for this tender is 2026-04-27. This is a Substation tender in Dalhousie, Himachal Pradesh