Himachal Pradesh State Electricity Board

Himachal Pradesh State Electricity Board has published Tender For Supply Of Equipment / Material , Design, Erection, Testing & Commissioning For Carring Out The Balance Pending Works Of 33 Kv S / C Line With Wolf Conductor From Existing 33 / 11Kv S / Stn. Holi To Existing 33 / 11Kv S / Stn. Garolaesd Bharmour Under Ed Chamba . - 1 Supply Part of 33 KV HT LINE WITH ACSR Conductor 30/7/2.59 (150 sq. MM) ON STEEL POLES 2 Prov. Steel tubular poles. 11mtrs 3 Muff for steel tubular pole (2000mm long) with concrete filling 4 Single Continous Earth wire (GI, 8 SWG) {alongwith 1 wire lengths for avg. one road crossing @ 20 m and Additional 1% (Sag and wastage)} @ 0.102 kg/m 5 Heat shrinkable kit for 33 KV XLPE cable 3C 120 sqmm 6 33 kV Discs insulator String sets on Dead End structures (comprising 3 No.Discs in each string: ^^(Porcelain, BS, 12 kV, 90 kN) including DeadEnd Clamps etc.) x (3 No. conductors) x (2 No. sides) 7 Erection of 33 kV HT Stay Set Complete with stay wire 7/4.00MM 11.5 Kg per stay set i/c stay hook, thimble, HT egg insulator etc. 8 Stay Wire (7/4.00 mm) (10.0 kg Per Stay Set) 9 33 kV Pin Insulators (Porcelain, 36 kV, 10 kN): 3 No per single pole 10 33 KV HT earthing set complete (REC Constr. Standared J-1) 11 Barbed wire (REC Sp F 3/1981) 12 Danger Plate (203X200X1.6 mm) 13 M.S Channel Iron X-arm 4000x125x65x6 mmfor D/P structure 14 M.S Channel Iron X-arm 4500x125x65x6 mm for Tripple/P structure 15 Full clamp with Nut and Bolt 16 M.S Angle Iron 2240x65x65x6 mm for D/P structure 17 M.S Angle Iron 4242x65x65x6 mm Tripple/P structure 18 M.S Cross baracing set consisting of one 2240x65x65x6mm 2 Nos. and 2700x50x50x6mm 2 Nos. ofM.S Angle Iron i/c Clamps and bolts 19 PCC pole 8 Mtr. Long for guarding 20 LT Stay set for gaurding poles 21 LT stay wire 7/3.15mm @6 Kg per set 22 Prov. Cetnary wire 23 HT earthing set complete (REC Constr. Standared J-1)for gaurding poles 24 M.S Angle Iron 4500x65x65x6 mm 25 Earth reel 26 Aluminium Paint 27 Prov. Laying Cementcocrete 1:4:8 (1 cement:4Sand:8 graded stone aggregate 400mm nominal size and curing complete in foundation and plinth 28 Manual carriage of line material (ST poles, stayset,stay wire etc.) for an average leade 3 KM 29 Erection Part of 33 KV HT LINE WITH ACSR Conductor 30/7/2.59 (150 sq. MM) ON STEEL POLES 30 Prov. Steel tubular poles. 11mtrs 31 Muff for steel tubular pole (2000mm long) with concrete filling 32 Single Continous Earth wire (GI, 8 SWG) {alongwith 1 wire lengths for avg. one road crossing @ 20 m and Additional 1% (Sag and wastage)} @ 0.102 kg/m 33 Heat shrinkable kit for 33 KV XLPE cable 3C 120 sqmm 34 33 kV Discs insulator String sets on Dead End structures (comprising 3 No.Discs in each string: ^^(Porcelain, BS, 12 kV, 90 kN) including DeadEnd Clamps etc.) x (3 No. conductors) x (2 No. sides) 35 Erection of 33 kV HT Stay Set Complete with stay wire 7/4.00MM 11.5 Kg per stay set i/c stay hook, thimble, HT egg insulator etc. 36 Stay Wire (7/4.00 mm) (10.0 kg Per Stay Set) 37 33 kV Pin Insulators (Porcelain, 36 kV, 10 kN): 3 No per single pole 38 33 KV HT earthing set complete (REC Constr. Standared J-1) 39 Barbed wire (REC Sp F 3/1981) 40 Danger Plate (203X200X1.6 mm) 41 M.S Channel Iron X-arm 4000x125x65x6 mmfor D/P structure 42 M.S Channel Iron X-arm 4500x125x65x6 mm for Tripple/P structure 43 Full clamp with Nut and Bolt 44 M.S Angle Iron 2240x65x65x6 mm for D/P structure 45 M.S Angle Iron 4242x65x65x6 mm Tripple/P structure 46 M.S Cross baracing set consisting of one 2240x65x65x6mm 2 Nos. and 2700x50x50x6mm 2 Nos. ofM.S Angle Iron i/c Clamps and bolts 47 PCC pole 8 Mtr. Long for guarding 48 LT Stay set for gaurding poles 49 LT stay wire 7/3.15mm @6 Kg per set 50 Prov. Cetnary wire 51 HT earthing set complete (REC Constr. Standared J-1)for gaurding poles 52 M.S Angle Iron 4500x65x65x6 mm 53 Earth reel 54 Aluminium Paint 55 Prov. Laying Cementcocrete 1:4:8 (1 cement:4Sand:8 graded stone aggregate 400mm nominal size and curing complete in foundation and plinth 56 Manual carriage of line material (ST poles, stayset,stay wire etc.) for an average leade 3 KM . Last date of submission for this tender is 2023-05-29. This is a Electrification Work tender in Dalhousie, Himachal Pradesh