Himachal Pradesh State Electricity Board

Himachal Pradesh State Electricity Board has published Tender For Supply Of Equipment / Material, Design, Erection, Testing, Commissioning, Forproviding1 Providing 11Kv Ht, Lt And 11 / .4Kv, , 63 Kva Sub / Stn. Ghornala In E-Section Bir Under Esd Baijnath. - 1 11 KV HT LINE 2 AAAC 7/3.35mm (50mm²)Provided by HPSEBL Store 3 Steel Tubular Pole (9 mtr.)Provided by HPSEBL Store 4 Muffs with concerete filling 5 Run Thro Structures (? Formation): on Single Pole Structures (Adopt Eight (8) No. Run -through Structures per Km)- 6 Cross Arm: [Channel Iron (100x50x6 mm), Length (1270) mm i/c tolerance of 100mm either side x 8 structure 7 Angel Iron (50x50x6 mm), Length (2x750) mm x 8 structure 8 Pole top Bracket 9 11 KV Pin Insulators (Porcelain, 12 KV, 10 KN): 3 No per pole structure Provided by HPSEBL Store 10 Dead End Structures: (Adopt three (3) No. per Km) on Double Pole (Prefer along road side) 11 Belt Set- MS Angle Iron : 50X50X6, Length 1800mm X 2 No. 12 X-Bracing Set - MS Angle Iron: 50x50x6, Length [2125 mmx 2 No.] 13 X-Arm (Horizontal)- MS Channel Iron: 100X50X6, Length 2340mm X 2 No. 14 Discs insulator sets on Dead End structures (comprising 1 No. Disc: (Porcelain, BS, 12 KV, 80 kN) including Dead End Clamps etc.) x (3 No. conductors) x (2 No. sides) 15 11kV Pin InsulatorsProvided by HPSEBL Store 16 HT Stay / Guy Arrangement 17 Stay set complete in all repect (1 No. / Single Pole, 4 No. / Double Pole Structures) 18 Stay Wire (7/3.15 mm) (6.0 kg Per Stay Set) Provided by HPSEBL Store 19 Earthing 20 HT Earthing set complete 21 GI 8 SWG Earth Wire 22 Cross lacing 23 Eye hook for Earth wire 24 Earth wire clamp 25 MS Channel Iron 75*40*6, Length 2400 mm for earth wire 26 Half Clamp 27 Full Clamp 28 Danger Plate (250x200x1.6 mm)Provided by HPSEBL Store 29 Nuts and Bolts of Various Sizes (Galvanised / Coated) [Preferably 16 mm F or more(with flat and spring washers)] 30 Barbed Wire 31 Red Oxide 32 Alluminium Paint 33 GO AB Switch Unit (11kV, 400A, 25 KA ) 34 X-Arm: [Channel Iron (75x40x6 mm), Length: 2800mm x 4 No. for supportingGO Switch & DO Fuse Unit 35 Add Erection Charges 36 Add transportation charges 37 LT Line 38 AAAC Conductor 7/3.15 mm2Provided by HPSEBL Store 39 Steel Tubular Poles (8 mtr) Provided by HPSEBL Store 40 Muffs with concerete filling 41 Angle Iron 75x75x6mm[Length 1.50 mtr + 0.02 Mtr] 42 D-Iron (U-Clamps) 43 Shackle Insulator 44 LT Stay Set 45 Stay Wire (7/3.15 mm) 46 Full Clamp 47 Nuts and Bolts of Various Sizes 48 Aluminium Paint 49 Earthing Set Complete 50 Earth wire GI Wire 8 SWG 51 Eye hook bolt 52 Add transportation charges 53 Add Erection charges 54 11/0.4KV 63KVA Distribution Transformer 55 Distribution Transformer (Ordinary), 11/0.4 kV,63KVA Provided by HPSEBL Store 56 Steel Tubular Poles (9 m, Working Load > 200 kgf/m²) Provided by HPSEBL Store 57 Muffs with concerete filling 58 X-Arm: [Channel Iron (100x50x6 mm), Length : 2800 mm X 2 Nos] 59 MS Angle Iron (50x50x6 mm), Length : 2800 mm X 1 Nos] for LAs 60 X-Arm: [Channel Iron (75x40x6 mm), Length : 2800 mm X 4 Nos] for supporting DO fuse unit & GO switch 61 X Arm Channel Iron (100X50x6 mm), Length : 2800 mm x 2 Nos for Transformer Bed 62 X Arm Channel Iron (100X50x6 mm), Length : 460 mm x 2 Nos for supporting main channel of Transformer 63 MS Angle Iron (50X50x6 mm), Length : 2800 mm x 2 Nos 64 MS Angle Iron (35X35x5 mm), Length : 460 mm x 2 Nos 65 MS Angle Iron (50X50x6 mm), Length : 950 mm x 2 Nos for Bed Knee Bracing 66 MS Angle Iron (50X50x6 mm), Length : 2800 mm x 2 Nos 67 MS Angle Iron (50X50x6 mm), Length : 450 mm x 1 Nos 68 GO Switch Handle supporting (Channel Iron (75x40x6mm), Length 460mm 69 GO AB Switch Unit (11kV, 400A, 25 KA ) tripple Pole O/D type 70 D.O Fuse Unit 71 Surge Arrester, 9 kV Station Class(Porcelain Type) 72 Discs insulator sets (comprising 1 No. Disc: ^^(Porcelain, BS, 12 kV, 90 kN) including Dead End Clamps etc.) 73 Stay set complete 74 Stay Wire (7/3.15 mm) (7.0 kg Per Stay Set) 75 Pipe Earthing Set 76 LT Distribution Panel Box with MCCB for 63KVA DTR 77 Half Clamp (M.S. Flat 50X6 mm) 78 Full Clamps (M.S. Flat 50X6 mm) 79 Nuts and Bolts of Various Sizes (Galvanised / Coated) [Preferably 16 mm F or more(with flat and spring washers)] 80 Aluminium Thimble 81 Aluminium Thimble 82 Danger Plate 83 Barbed Wire 84 LT Cable (3.5 Core) 35 mm² 85 Energy Meter (3-Phase, 4-Wire) DLMS compliant 100 A CT Type for 63 KVA Transformer Provided by HPSEBL Store 86 (a) Aluminium Paint. 87 b). Red Oxide 88 LT Switched Capacitors 9 KVAr for 63 KVA (rate per KVAr) 89 Add erection charges 90 Add transportation charges 91 Quantities are mentioned above are tentative and Actual Quantity shall be worked out after Check Survey to be carried out by the successful Tender and detailed Engineering and finalization of Tower location Chart.Payment shall be made as per Approved Bill of Material/Actual Quantities measured at site. . Last date of submission for this tender is 2023-05-19. This is a Bolts tender in Kangra, Himachal Pradesh