Panchayat Raj Department

Panchayat Raj Department has published TIKRI INSTALLATION OF OPEN GYM AT VILLAGE TIKRI-- 1 NS 2 NS Item -5. SEE Saw :- Product type Playing Material Mild steel Size 6 Feet Age group up to 12 Seating 2 seater All Joint shall be lubricated made by reputed company and powder coated using Akzo or equipment of 80-120 micron thick. All welding joints of pipe are well welded with jointed scalloped a necessary and dressed off welded with joints scalloped a necessary and dressed off removing sharp edge and burrsto be approved by Engineer in charge. Equipment to be fitted within built limiters to prevent unwanted movements. All open ends of pipe to be coloured by GI/LLDPWE caps for user safety. The equipment to be fixed on ground with concrete of minimum strength M25 and J shaped welded bolts and once the concrete is set, fix the equipment on to it and cove nuts and bolts with the base plate cover, all complete as per direction and approval of Engineer in Charge regarding material, shape of equipment, colour on metal, seat and base cover plate and fixing of equipment etc. Including fixing at site with CC and Transportation 3 NS Item -8. LEG Press Centre main Pipe 114mm B class (3mm to 3.5 thickness) Sitting pipe 40mm B class (3mm to 3.5 thickness) Both side vertical structure pipe 40mm Seat metallic sheet 3mm to 3.5 mm MS Footrest MS checked plate 4mm thickness Permanent lubricated sealed bearing of reputed brand Nuts and Bolts Galvanized Nylon covers for covering the nuts and bolts Including fixing at site with CC and Transportation 4 DOUBLE CROSS WALKER FOR OPEN GYM Including fixing at site with CC and Transportation 5 NS Item -`Pull Chair:- Providing, designing and fixing of Pull pair of size 2500 X 800 X 2000 mm fabricated with main post of 140mm dia and 3.00 mm thick and other pipes of 40mm dia 3.00mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized, and powder coated using Akzo Nobel or equivalent of 80-120 micron thick. All welding joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Handle bars are to be provided with high quality grip rubber at top end. Padals shall be made up of Nylon alloy with rounded edge of prevent any impact of injury and seat to be made from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic 4.00mm, colourful and U V resistant environmental friendly. Bearing used shall be maintenance free, duly oiled sealed and self lubricated made by reputed company to be approved by Engineer-in-Charge. Equipment to be fitted within built limiters to prevent unwanted movements. All open ends of pipe to be coloured by GI/LLDPE caps for user safety. The equipment to be fixed on ground with concrete of minimum strength M25 and J shaped welded bolts and once the concrete is set, fix the equipment on to it and cover nuts and bolts with the base plate cover, all complete as per direction and approval of Engineer-in-Charge regarding material, shape of equipment, colour on metal, seat and base cover plate and fixing of equipment etc. Including fixing at site with CC and Transportation 6 Providing and designing and fixing Push Up Bar complete all respect. Including fixing at site with CC and Transportation 7 PARALLEL BAR FOR OPEN GYM Including fixing at site with CC and Transportation 8 Abb Trainer / Sit up Brench Main post- 114mm pipe sze - 2`x4` thickness of Pipe - 3mm Pipe Standard : GP Post caps: Aluminium/LLDPE Screw otheer - Nylon Lock Bolt Material: Mild Steel Holding capacity: 120 kg Age Group: 13 plus Including fixing at site with CC and Transportation . Last date of submission for this tender is 2025-02-12. This is a Gym Equipment tender in Kurukshetra, Haryana