Municipal Corporation

Municipal Corporation has published Supply Of Sanitation Items For Municipal Committee , Sisai . - A. Heavy Duty Five Bars Coloured Rehri 24” Frame Of Reputrd Company Neelam / Atlas / Hero Brand Nb. The Front Wheel ( 1 Nos. ) Rim Dia 28” , Minimum 40 Spokes Of 10 Gauge With Tubeless Tyre Of Approved Brand And Rear Wheel ( Two Nos ) Of Brand Used In Motor Cycle As Per Directions Nc. Body Should Be Used In Wooden Frame Size 48”X30”X24” With Spots Nd. The Body Painted Single Coat Of Wooden Primer And Two Coat Of First Quality Synthectic Paint Ne. All Metalic Surface Shall Be Painted On Both Side Nf. Heavy Duty Rikshaw / Rerhi Rim Should Be Chrome Paint With Superior Quality Hubs And Spokes Ng. Heavy Duty Ball Bering Of Isi Specification To Be Used Nh. Heavy Duty Rim To Be Supported By Additional 4 Nos M.S Plate 30Mm X 4Mm Angle To Further Support Heavy Load Ni. Heavy Angle 25X25x3 Mm Fixed At The Back To Suppoert The Body Nj. Iron Flate To Be Used To Provide Support To The Body In The Middle Nk. Printing Of The Logo On The Both Side Of The Body Of The Rikshwa / Rerhi As Per Direction Of The Council. Nl Moveable Partician For Dry And Wet Waste Collection With Colour Paint. N N Bi01010001010000000000000515bi0100001113 15 Nos. 2 2 Specification Of Wheel Barrows Na ) Top Frame Shall Be Made From 25Mm Od Ms Round Pipe 4 Nos., Side Angle For Support Of Top Frame Shall Be Made Of 35X35x5 Mm Angle And Button Made Of Angle Sixe 25X25x5 Mm. Nb ) Side Should Be Fabricated From 35X5 Mm Ms Flat Handle Should Be Made From 25 Mm Od Pipe With Heavy Duty Handle Grip. Nc ) The Body Shall Be Welded To The Chassis. Nd ) The Top Edge Of The Body Shall Be Rolled Over A Steel Rod Of 8 Mm Diameter In Order To Form A Bead And Retain The Rod. Ne ) The End Of The Pipes At The Handles Shall Be Piugged, Welded And Ground Smooth To Remove Sharp Edges. Nf ) 2 Nos. Wheels Shall Be Constructed Ofmild Steel Disk Type Fitted With Solid Rubber Tyres. The Wheels Shall Be Of-Size 300 Mm Diameter And 50 Mm Width With 50 Mm Rubberized Having A Spindle Of 25 Mm Diameter. The Wheels Shall Be Fitted With Single Row Deep Grooved Ball Bearing Of 25 Mm Inner Diameter, 52 Mm Outer Diameter And 15 Mm Width, Provided With Dust Seal And Arrangement For Lubrication. N Bi01010001010000000000000515bi0100001114 15 Nos. 3 3 Specification Of M.S Dustbin : With Providing And Fixing Nm.S Dustbin Make Of 16 Gauge Thick Sheet And Angle 50X50x6mm Size Of Angle . Dustbin Size 450 Mm X 600 Mm Ndustbin And Painting And Writing Work Green / Blue Colour Complete In All Respect N Bi01010001010000000000000515bi0100001115 15 Nos.. Last date of submission for this tender is 2021-05-11. This is a Coats And Jackets tender in Sisai, Haryana