Irrigation Department

Irrigation Department has published Tender For Estimate For Supply Erection & Commissioning Of Various Electromechanical Equipment Like Vt Pump, Electric Motors, Ltbb Panel And Other Allied Material For Flood Protection Works In Jui Water Services Mechanical Sub Division, Bhiwanifor The Year 2023-24- 1 Supply, erection and Commissioning of 20 Cs. VT Axial flow pumps of 970 RPM, having static Lift 6mtr., including delivery pipe (6+6 mtr.) and MS delivery bends of minimum 8 mm thickness with bituminous based paint inside & outside including flange welding, HT nut-bolts, Complete in all respect, as per site and as per approved technical specification.( Chang Drain 1st Stage,Chang Drain 2ndStage) 2 Supply, erection and commissioning of 10 Cs. V.T. Axial flow pumps of 1440 RPM, having static lift of according to various sites lift, including delivery pipe (6+6 mtr.) and MS delivery bends of minimum 8 mm thickness with Bituminous Based Paint inside & outside including flange welding, H.T. nut-bolts, complete in all respect, as per site and as per approved technical specifications. (Kalinga Drain 1st , Kalinga Drain 2nd ,Chang Drain 1st , Dhang Drain 2nd, Mandhana Drain, KheriDaultpur Drain.) 3 Supply, erection and commissioning of 5 Cs. V.T. Axial flow pumps of 1440 RPM, having static lift of according to various sites lift, including delivery pipe (6mtr.) and MS delivery bends of minimum 8 mm thickness with bituminous based paint inside & outside including flange welding,HT nut-bolts, complete in all respect, as per site and as per approved technical specifications. (Kalinga Drain 1st ,Kalinga Drain 2ndandKheriDaultpur Drain.) 4 Supply, erection and commissioning of solid shaft motor of capacity 100 HP, 970 RPM, 3 phase 415 volt with efficiency class IE2 (as per IS 12615 with latest amendments) suitable for 20 Cs VT Axial flow pumps with 6mtr.lift type vertical flange mounted & as per approved technical specification with earthing of motor. 5 Supply, erection and commissioning of solid shaft motor of capacity 50 HP, 1440 RPM, 3 phase 415 volt with efficiency class IE2 (as per IS 12615 with latest amendments) suitable for 10 Cs. VT Axial flow pumps with 6 mtr.lift type vertical flange mounted & as per approved technical specification with earthing of motor. 6 Supply, erection and commissioning of solid shaft motor of capacity 30 HP, 1440 RPM, 3 phase 415 volt with efficiency class IE2 (as per IS 12615 with latest amendments) suitable for 5 Cs VT Axial flow pumps with 6 mtr.lift type vertical flange mounted & as per approved technical specification with earthing of motor. 7 Supply, erection and commissioning of 100 HP Fully Automatic ATS Starter with a MCCB of 400 amp. with main contactor of 300 amp., tapping contactor of 200 amp and star of 110 amp for 100 HP Motor with ATS with degree of protection IP 54 including connection and items as suitable capacitor bank, bush bar, push button, relays, meter, thimbles, nut/bolt, lugs, etc. complete in all respect with a stand of MS Channel (1feet up from floor) with latest amendments suitable for 20 Cs. Axial flow pumps and as per approved technical specifications. 8 Supply, erection and commissioning of 50HP Fully Automatic ATS Starter with MCCB of 250 Amp. Capacity with all accessories along with an-addl. MCCB of 63 Amp. for lighting loads, Indicators, Relay, Meters, Push buttons, bus bars, timers etc. with contactor rating as 110, 80, 50 Amp. with first filling of oil (if oil cooled ATS used) starter should have individual capacitor bank of 25 KVAR capacity coupled through 63 Amp. MCCB and timer with digital display instruments & other allied accessories for automatic as well as manual operation, complete in all respect with a stand of MS Channel (1feet up from floor) with latest amendments suitable for 10 Cs. Axial flow pumps and as per approved technical specifications with earthing. 9 Supply, erection and commissioning of 30HP Fully Automatic ATS Starter with MCCB of 160 Amp. Capacity with all accessories along with an-addl. MCCB of 63 Amp. for lighting loads, Indicators, Relay, Meters, Push buttons, bus bars, timers etc. with contactor rating as 110, 80, 40 Amp. with first filling of oil (if oil cooled ATS used) starter should have individual capacitor bank of 16 KVAR capacity coupled through 63 Amp. MCCB and timer with digital display instruments & other allied accessories for automatic as well as manual operation, complete in all respect with a stand of MS Channel (1feet up from floor) with latest amendments suitable for 5 Cs. Axial flow pumps and as per approved technical specifications With earthing. 10 Supply, erection and commissioning of M.S delivery Pipes 341.4 mm inner dia (in approx 6 Mtr. per pipe) and each pipe of 8 mm thickness both end welded with flange made MS Plate as per approved specification & Make. (Including HT Nut & Bolt, Rubber Sheet 1/8 & other fitment accessory required). 11 Supply, erection and commissioning of M.S delivery Pipes 258.9 mm inner dia (in approx 6 Mtr. per pipe) and each pipe of 8 mm thickness both end welded with flange made MS Plate as per approved specification & Make. (Including HT Nut & Bolt, Rubber Sheet 1/8 & other fitment accessory required. 12 Supply, erection and commissioning of 3.5 core 185mm sq Armoured PVC aluminium power Cables, grade as per IS 7098-1985 as per approved makes and other allied material completed in all respect. 13 Providing & laying LT Armoured PVC aluminium cable of size 50mm sq., 3 core conforming to IS 7098 -1985 as per approved makes. . Last date of submission for this tender is 2024-02-26. This is a Electrification Work tender in bhiwani, Haryana