Irrigation Department

Irrigation Department has published Supply Erection And Commissioning Of 2 No. Axial Flow Vertical Pumps Of 35Cs And 3 No. Axial Flow Vertical Pumps Of 20 Cs With 2 Nos. 150 Hp 3 No. 100 Hp Solid Shaft Cage Induction Motors And 500 Kva Diesel Generating Set At Chhudani Pump House. , Supply Erection & Commissioning Of 35 Cs V.Taxial Flow Pump Of 970 Rpm Having Static Lift Of 21 Ft, Including Delivery Pipe Of 4 Nos. Of 6 Mtr Each & Bendswith 8 Mm Thickness Alongwith Bend Support And Coating Inside And Outside Including Flange Welding, Nut Bolts, Syphon Breaker Valve Complete In All Respect As Per Site Requirement Andas Per Technical Specifications. , Supply Erection & Commissioning Of Squirrel Cage Lt 3 Phase415 V ( +, - 10% ) Induction Motor For Continuous Duty Vertical Flange Mounted Of 150 Hp 970 Rpm Suitable For 35 Cs Vt Axial Flow Pumps Complete In All Respect As Per Technical Specifications Approved By I&Wr Department Haryana As Per Annexure-B. , Providing & Laying Lt Armoured Pvc Aluminium Cable Of Size 630 Sq. Mm, 3 ½Core Conforming To Is 7098 -1985 As Per Approved Makes , Providing & Laying Lt Armoured Pvc Aluminium Cable Of Size 185 Sq. Mm, 3 ½Core Conforming To Is 7098 -1985 As Per Approved Makes. , Providing & Laying Lt Armoured Pvc Aluminium Cable Of Size 120 Sq. Mm, 3 ½Core Conforming To Is 7098 -1985 As Per Approved Makes. , Supply, Erection And Commissioning Of 20 Cs V.T. Axial / Mixed Flow Pump Of 970 Rpm Having Static Lify Of 6.0 Mtr Including Bends With With Support Of Minimum 8 Mm Thickness With Bituminous Based Paint Including Flange Welding, H.T Nut-Bolt, Comlete In All Respect As Per Site Requirement And Any Item Left Over As Per Approved Technical Specification. , Supply, Erection And Commissioning Of Solid Shaft Motor Of Capacity 100 Hp , 970 Rpm, 3 Phase 415 Volt With Efficiency Class Ie2 As Per Is 12615 With Latest Amendments Suitable For 20 Cs Vt Axial Flow Pumps Type Vertical Flange Mounted As Per Approved Technical Specification , Supply, Erection And Commissioning Of M.S Delivery Pipe 445.2 Mm Inner Dia. ( In Approx 6 Mtr Per Pipe ) And Each Pipe End Waled With Flang Made Of 6 Mm Thick Ms Plate As Per Approved Specification And Make. ( Including Ht Nut & Bolt, Rubber Sheet 1 / 8 And Other Fitment Accessory Required ) , Providing 30 Feetdeep Complete Double Side Plate Earthing With 2 Earth Pits On Both Sides Of Pump House By Boring & Lowering 1.5 Gi Pipe, Filling Boring With Charcoal, Copper Strips, Salt & Fixing Base Plate, Connecting This Main Earthing Through Copper Strips / Wires Up To Motors & Panel As Per Site Requirement. , Supply Of 415 Volt, 1250 Amp, 3 Phase 50 Hz. Motor Control Centre L.T. Panel With Main Incommer And5 No. Outgoing Feeders With Auto Transformer Starter Oil Cooled Panel For Operating, 2 No. 150Hp Motor, 3 Nos 100Hp Motor Fitted With Suitable Range Acb, Mccb, Air Breakcontactors, Micro Controller Basedfault Protecting Devices / Relaysand Other Allied Accessories Complete In All Respect As Per Technical Specifications Approved By I&Wr Department Haryana As Per Annexure-C , Supply, Erection And Commissioning Of 500 Kva Liquid Cooled Diesel Generator-Generating Set, Genset, Dg Set, With Amf Control Panel ( Koel Green Electro ) Of Installation, Running, Earthing, Foundation For Dg Set, With Incoming And Outgoing Cables Etc Complete In All Respect. Last date of submission for this tender is 2023-03-29. This is a Bolts tender in Jhajjar, Haryana