Haryana Sugar Federation

Haryana Sugar Federation has published Tender For General Mill Store Items , S. S. 304 Split Pin Size 5/25, As Per Sample, Good Quality , Ring Type Rubber Bush For Travelling Grate Drive Coupling, As Per Sample, Good Quality , M. S. Washer I.D 17Mm , Od 30 Mm, Thik- 3Mm, As Per Sample, Good Quality , Cotton Waste, Good Quality , Turk Head Wire Bush O.D- 55Mm, Heavy Duty , Hexa Blade High Speed , Cutting Wheel Ag-4 , Grinding Wheel Ag-4 , Buffing Wheel Ag-4 , Emery Cloth Rough, Carborundum , Stream Hose-1W Size- 1” (25Mm), Tube- Black Epdm Reinforcement: Double Wire Braded High Tensile Steel Wire, Cover Black Epdm, Make- Indomabsson , Rustolene (500Ml) Pack, Good Quality , Wire Brush, Good Quality , Paint Brush 4”, Good Quality , Paint Brush 2”, Good Quality , Old Dhoti 4Mtr, Good Quality , Teflon Tape , M-Seal , White Lead , Red Lead , Soldering Flues , Soldering Paste , Copper Rivet 5X25mm , Old Dhoti , S. S. Sim (0.05 To 0.5Mm), Make- Skf , Taflon Hammer , Star Coupling (L-190) Rubber , Engine Oil For Actuator 20W40, Make- Castrol/Servo , Rustolene , Brasso 500Ml , Annabond 666 , Asbeston Flat Temp: 1000ºc 3 Rol (30 Mtr Each) , D.P. Test Kit 96, Make- Checkmate , D.P. Test Kit 97, Make- Checkmate , D.P. Test Kit 98, Make- Checkmate , Lead Wire 0.5Mm , Wd-40 , Cold Galanizing Sprey, Make- Molykote , Metallic Joint Sheet Thicknes 1/32” , Make- Uniklinger , M. S. Washer ¼” , M. S. Washer 3/8” , M. S. Washer 1/2” , M. S. Washer 5/8” , M. S. Washer 3/4” , M. S. Washer 1” , M. S. Bolt With Nut 7/8” X 5” , M. S. Nut Only ¾” , M. S. Bolt With Nut ¾”X 2” , M. S. Bolt With Nut ¾” X 4” , M. S. Bolt With Nut ¾” X 6” , H. T. Bolt With Nut Size ¾” X 4” , H. T. Bolt With Nut Size 7/8” X 4” , Bolt With Nut 5/16” X 8” , S. S. Bolt With Nut ½” X 6” , S. S. Bolt With Nut 7/8” X 10” , M. S. Nut With Bolt ¼” X 1” , M.S Nut With Bolt ¼”X 1½” , M. S. Nut With Bolt ¼” X 2½” , M. S. Bolt With Nut ¼” X 3’ , M. S. Bolt With Nut ¼” X 4’ , M. S. Bolt With Nut ¼” X 2’ , Emery Paper Fine , M. S. Bolt With Nut 5/16” X 2” , M. S. Bolt With Nut 5/16” X 2½” , M. S. Bolt With Nut 3/8” X 1”. Last date of submission for this tender is 2025-05-26. This is a Railway Ancillaries tender in Rohtak, Haryana