Haryana Power Generation Corporation Limited

Haryana Power Generation Corporation Limited has published Supply Of Pneumatic Actuator Operated Knife Gate Valves--- 1 300 NB knife gate valve Model – wafer, cast body, unidirectional,.End style – Lugged/wafer/flanged style with metric threaded holes in chest area and through holes in lugs.Drilling – Suitable to mount between ANSI 150 lb flanges.Body – Cast Iron (IS 210 Gr. FG 260); Gate – ASTM A 240 Type 304-Nitriding to approx. 600-1250 HV1 surface hardness; Packing Material – PTFE impregnated syntax fiber; Body Leakage – Zero Leakage; Seat Leakage – Max. Allowable leakage of 2.25 lpm when tested with water at 40 psi applied in the normal flow direction; Piston Rod – ASM A276 Type 304;Gland – ASTM A536 GR. 65-45-12; Side plate – Carbon Steel; Bolts and Nuts – Carbon Steel; Gasket – CAF; Deflection cone – Cast Ni-hard (Approx. sec. as per IS 4771 Type 2, 450-600 BHN hardness); Actuator – Double acting pneumatic Metal cylinder actuator suitable for max 7 bar pressure & 80 deg. C. model: CCMC8 2 150 NB knife gate valve Model – wafer, cast body, unidirectional,.End style – Lugged/wafer/flanged style with metric threaded holes in chest area and through holes in lugs.Drilling – Suitable to mount between ANSI 150 lb flanges.Body – Cast Iron (IS 210 Gr. FG 260); Gate – ASTM A 240 Type 304-Nitriding to approx. 600-1250 HV1 surface hardness; Packing Material – PTFE impregnated syntax fiber; Body Leakage – Zero Leakage; Seat Leakage – Max. Allowable leakage of 2.25 lpm when tested with water at 40 psi applied in the normal flow direction; Piston Rod – ASM A276 Type 304;Gland – ASTM A536 GR. 65-45-12; Side plate – Carbon Steel; Bolts and Nuts – Carbon Steel; Gasket – CAF; Deflection cone – Cast Ni-hard (Approx. sec. as per IS 4771 Type 2, 450-600 BHN hardness); Actuator – Double acting pneumatic Metal cylinder actuator suitable for max 7 bar pressure & 80 deg. C. model: CCMC8 3 300 NBknife gate valve Model – wafer, Mid flange two piece split cast body, bidirectional,.End style – Lugged/wafer/flanged style with metric threaded holes in chest area and through holes in lugs.Drilling – Suitable to mount between ANSI 150 lb flanges.Body – Cast Iron (IS 210 Gr. FG 260)Gate – ASTM A 240 Type 304-Nitriding to approx. 600-1250 HV1 surface hardness; Packing Material – PTFE impregnated syntax fiber; Body Leakage – Zero LeakageSeat Leakage – Max. Allowable leakage of 2.25 lpm when tested with water at 40 psi applied in the normal flow direction; Piston Rod – ASM A276 Type 304; Gland – ASTM A536 GR. 65-45-12; Side plate – Carbon SteelBolts and Nuts – Carbon Steel; Gasket – CAFDeflection cone – Cast Ni-hard (Approx. sec. as per IS 4771 Type 2, 450-600 BHN hardness)Actuator –Double acting pneumatic Metal cylinder actuator suitable for max 7 bar pressure & 80 deg. C. model: CCMC8. 4 200 NBknife gate valve Model – wafer, Mid flange two piece split cast body, bidirectional,.End style – Lugged/wafer/flanged style with metric threaded holes in chest area and through holes in lugs.Drilling – Suitable to mount between ANSI 150 lb flanges.Body – Cast Iron (IS 210 Gr. FG 260)Gate – ASTM A 240 Type 304-Nitriding to approx. 600-1250 HV1 surface hardness; Packing Material – PTFE impregnated syntax fiber; Body Leakage – Zero LeakageSeat Leakage – Max. Allowable leakage of 2.25 lpm when tested with water at 40 psi applied in the normal flow direction; Piston Rod – ASM A276 Type 304; Gland – ASTM A536 GR. 65-45-12; Side plate – Carbon SteelBolts and Nuts – Carbon Steel; Gasket – CAFDeflection cone – Cast Ni-hard (Approx. sec. as per IS 4771 Type 2, 450-600 BHN hardness)Actuator –Double acting pneumatic Metal cylinder actuator suitable for max 7 bar pressure & 80 deg. C. model: CCMC8. . Last date of submission for this tender is 2023-08-08. This is a Actuator tender in Yamunanagar, Haryana