Haryana Board Corporation

Haryana Board Corporation has published Tender For Supply, Installation Of Officer Chair, Almirah, Metal Rack & Three Seater Chair In Head Office Of “The Fatehabad Central Co-Operative Bank Ltd- 1 Details 2 Fixed Chair : Fixed Visitor Chair, Overall Dimension: 530W ±10 X 580D ±10 X 840H ±10 Mm, Seat & Back Of Chair Is Made 12Mm Thick Hot Pressed Plywood Cushioned With Pu Moulded Foam Fabric Upholstery, Pvc Beading Used In Seat & Back, Seat & Back Fixed With Ms Powder Coated Plate, Used Pu Foam On Seat Of D-45 Kg / M3, Used Foam On Back Of D-45 Kg / M3, Seat Size: 460W ±10X 405D ±10 X 60Thick. ±5 Mm, Back Size: 460W ±10 X 415H ±10 X 60Thick. ±5Mm, Armrest: Armrest Made Of Good Quality Injection Moulded Ppcp Cover Fixed With 16Gauge Powder Coated Round Pipe Of 25.4Mm, Armrest Fixed With Seat & Back, Under Structure: Cantilever Frame Made Of 25.4Mm Round Pipe With 14 Gauge Thickness Duly Powder Coated With Plastic Bushes . 3 Revolving Chair:: Medium Back Revolving Chair, Overalldimension:- 715W:1:10 X 715D :1:10 X 1020H :1:10 Mm .Seat Of Medium Back Chair Is Made Of 12Mm Thick Hot Pressed Plywood Pasted With Pu Moulded Foam With Fabric Upholstery On Seat , Used Pu Moulded Foam On Seat Of D-45 Kg / M3 , Back Of Medium Back Chair Is Made Of Injection Moulded Pp Material Structure In Black Colour Upholstered With Mesh Fabric , Seat Size: 510W :1:10 X 510D :1:10 X 60Thick. :1:5 Mm , Back Size:-460W :1:10 X 490H :1:10Mechanism:- Centre Tilt Mechanism Single Point Control, Pmvides Maximum Adjustability And Scope For Comfort , Seat & Back Are Fixed Together With Arms & Whole Structure Moves Together In One Direction , Single / Upright Position Locking , Tilt Tension Knob To Loosen Or Tighten The Tension According To Users Body Weight .Gaslift:- Lift -Used Gaslift Of 85 Mm Size Of Class- Iv Grade , Pllastic Gas Lift Cover .Armrest:- Fixed Pp Armrest In Black Colour, Seat & Back Connected With Arms .Chair Base & Wheels:- Revolving Pedestal Metalinserted Ppcpbase Consists Of 5 Prongs With 660:1:5 Mm Pitch Circle Diameter, 50Mm Dia. Black Nylon - Twin Wheel Pin Castor 4 Almirah:: Overall Size 915W X 485D X 1980H , Top , Bottom , Side Panel & Shelve Made Up Of 0.8Mm Thick Crca Sheet Powder Coated , Legs Made Up Of 0.8Mm Thick Crca Sheet Powder Coated , Shutter Made Up Of 1Mm Thick Crca Sheet Powder Coated , No Sharp Edges Of Almirahends , All Shelve Rack Divided Into Equal Parts , Door Die Cast Chrome Plated Handles Fitted With Washer & Double Nut , Handles Ring Made Ofpvc Cap , Almirah All Metallic Panelsscrew With Nut & Bolt , All Metal Pieces Shall Be Welded Properly Strongly And Conformity With Regulations With Co2 Welding Shall Be Used , Crca Metal Shall Be Coated After Being Treated With At Least Three Stages And Cleaned From Oil , Grease Dust And Other Dirt Using Special Thermal Control Coating For Metal Furniture To Form A Layer Of Base Coating Of ( Iron Phosphating ) ( 0.4 – 0.8 ) Gm / M² Automatic Spray Coating Shall Be Applied To Be Followed By A Drying Process In A Thermal Furnace With Suitable Temperature And Time For The Process , Metal Pipe & 7 Tank Treatment With Minimum 45-50 Micron Powder Coating . 5 Slotted Angle Rack :: Slotted Angle Rack Overall Size :- 900Wx450dx1800h Mm, Angle Made Up Of Crca 40X40x2mm Thick Duly Powder Coated, Shelve Made Up Of Crca 0.8 Mm Thick Duly Powder Coated, Corner Plate Made Up Of Crca 1 Mm Thick Duly Powder Coated, Slotted Angle Rack Should Be Supplied In Knock-Down Condition , High Quality Ppcp Shoes Should Be Used On Bottom To Avoiding Scratches On The Floor , All Metal Components Should Be Pre-Treated With Zinc Phosphating In Minimum 7 Tank Process And The Powder Coated With Epoxy Polyester With Approved Shade , Thickness Of Coating Should Be Minimum 50 Microns . 6 Three Seater Waiting Chair ::Dimensions : 200X60x30 Cm, Chrome Plated, No. Of Seats -3, Heavy-Duty Steel Frame That Is Strong And Stable. The Frame Is Powder Coated For Added Strength And Durability And Features Adjustable Legs For A Perfect Fit. The Chair Also Features A Breathable Mesh Backrest And Upholstered Armrests For Extra Support And Comfort.. Last date of submission for this tender is 2024-01-02. This is a Steel Furniture tender in Fatehabad, Haryana