Defence Research And Development Organisation

Defence Research And Development Organisation has published Supply Of Cnc And Conventional Tools-1 Left Hand Turning Tool Holder For Profiling, Approach Angle 107°30, Shank Size 3232, For Use Of Insert With Cutting Edge Length 16Mm, Included Angle Of Insert 35°, Total Length Of Tool 170Mm As Per Appendix-A 2 Inserts For Above Tools To Machining Soft Materials ( Non-Ferrous ) , With Cutting Edge Length 16Mm, Corner Radius 0.4Mm, Sharp Cutting Edge, Included Angle Of The Insert 35°. Uncoated Grade Of Insert As Per Appendix-A 3 Right Hand Turning Tool Holder For Profiling, Approach Angle 107°30, Shank Size 3232, For Use Of Insert With Cutting Edge Length 16Mm, Included Angle Of Insert 35°, Total Length Of Tool 170Mm As Per Appendix-A 4 Inserts For Above Tools To Machining Soft Materials ( Non-Ferrous ) , With Cutting Edge Length 16Mm, Corner Radius 0.4Mm, Sharp Cutting Edge, Included Angle Of The Insert 35°. Coated Grade Of Insert As Per Appendix-A 5 Left Hand Turning Tool Holder For Turning And Profiling, Approach Angle 93°, Shank Size 3232, For Use Of Insert With Cutting Edge Length 13Mm, Insert With Included Angle 35°, Total Length Of Tool 170Mm. Tool Should Have Specific Profile In The Pocket To Hold Insert Of Equivalent Profile To Avoid Micro Movement Of Insert During Machining As Per Appendix-A 6 Right Hand Turning Tool Holder For Turning And Profiling, Approach Angle 93°, Shank Size 3232, For Use Of Insert With Cutting Edge Length 13Mm, Insert With Included Angle 35°, Total Length Of Tool 170Mm. Tool Should Have Specific Profile In The Pocket To Hold Insert Of Equivalent Profile To Avoid Micro Movement Of Insert During Machining As Per Appendix-A 7 Inserts For Above Tools To Machining Soft Materials ( Non-Ferrous ) , With Cutting Edge Length 13Mm, Corner Radius 0.4Mm, Sharp Cutting Edge, Included Angle Of The Insert 35°. Coated Grade Of Insert As Per Appendix-A 8 Parting Block Of Size 32X32mm, Capable Of Holding Parting Blade Of Width 25Mm, With Max Overhang Outside The Block 60Mm, Length Of The Block 120Mm As Per Appendix-A 9 Parting Blade Of Width 25Mm, Capable Of Holding 6Mm Parting Width Insert. Uncoated Grade Of Carbide. Total Length Of The Blade 150Mm. Spring Clamp Pocket As Per Appendix-A 10 Parting Insert 6Mm Width, Corner Radius 0.4Mm, High Feed Geometry, Universal Grade Of Carbide As Per Appendix-A 11 Carbide Inserts For Face Mill Cutter 100Mm, With Cutting Edge Length 12Mm, Side Clearance Angle 29Deg For The Insert. Sharp Cutting Edge, Coated Grade To Cut Soft Non Ferrous Material And Ferrous Material As Per Appendix-A 12 Sleeve For Left Hand Boring Bar Dia 25Mm, Od-50Mm, Suitable For Clamping Round Shank Tools Also As Per Appendix-A 13 Sleeve For Left Hand Boring Bar Dia 16Mm, Od-50Mm, Suitable For Clamping Round Shank Tools Also As Per Appendix-A 14 Sleeve For Left Hand Boring Bar Dia 20Mm, Od-50Mm, Suitable For Clamping Round Shank Tools Also As Per Appendix-A 15 Boring Bar Left Hand Min Cutting Dia 20 Mm Approach Angle 142° Length 200Mm For Use Of Inserts 35° Included Angle As Per Appendix-A 16 Inserts For Above Boring Bar To Machine Soft Material ( Non-Ferrous ) As Per Appendix-A 17 Solid Carbide End Mill 0.2Mm Diameter Length 2D As Per Appendix-A 18 Solid Carbide End Mill 1.0 Mm Diameter Length 2D As Per Appendix-A 19 Solid Carbide End Mill 0.5Mm Diameter Length 2D As Per Appendix-A 20 Solid Carbide End Mill 2.0Mm Diameter Length 2D As Per Appendix-A 21 Solid Carbide End Mill 2.5Mm Diameter Length 2D As Per Appendix-A 22 Solid Carbide End Mill 5.0Mm Diameter As Per Appendix-A 23 Bt 40 Collet Chuck Holder As Per Appendix-A 24 Collect To Hold End Mill Upto 3Mm As Per Appendix-A 25 Collect To Hold End Mill Upto -6Mm As Per Appendix-A 26 Left Hand Tool Holde For Profiling With Approach Angle 62°50 Shank Size 3232 Using Insert With 55° Angle As Per Appendix-A 27 Inserts For Above Tools To Machining Soft Materials ( Non-Ferrous ) , With Cutting Edge Length 11Mm, Corner Radius 0.4Mm, Sharp Cutting Edge, Included Angle Of The Insert 55°. Uncoated Grade Of Insert As Per Appendix-A 28 Inserts For Above Tools To Machining Soft Materials ( Non-Ferrous ) , With Cutting Edge Length 11Mm, Corner Radius 0.4Mm, Sharp Cutting Edge, Included Angle Of The Insert 55°. Coated Grade Of Insert As Per Appendix-A 29 Parting Block Of Size 32X32mm, Capable Of Holding Parting Blade Of Width 25.9Mm, With Max Overhang Outside The Block 60Mm, Length Of The Block 120Mm As Per Appendix-A 30 Parting Blade Of Width 25Mm, Capable Of Holding 1.3Mm Parting Width Insert. Uncoated Grade Of Carbide. Total Length Of The Blade 110Mm. Spring Clamp Pocket As Per Appendix-A 31 Parting Insert 1Mm Width, , High Feed Geometry, Universal Grade Of Carbide As Per Appendix-A 32 Parting Blade Of Width 25.9Mm, Capable Of Holding 1.8Mm Parting Width Insert. Uncoated Grade Of Carbide. Total Length Of The Blade 110Mm. Spring Clamp Pocket As Per Appendix-A 33 Parting Insert 1.8Mm Width, , High Feed Geometry, Universal Grade Of Carbide As Per Appendix-A 34 Square Shoulder Face Mill Cutter Dia 125 Mm With Bore Dia 40Mm For Holding 8 Cutting Inserts As Per Appendix-A 35 Inserts For Face Mill Dia 125Mm, With Light Cutting Geometry, Clearance Angle 18° And Ground Inserts To Cut Soft Metals And Steel As Per Appendix-A 36 Face Mill Adapter For Cutter Dia 125Mm, Bore Dia40, For Bt40 Machine As Per Appendix-A 37 Hss Square Bits C 45 Grade 4X4x63 Mm As Per Appendix-A 38 Hss Square Bits C 45 Grade 25X25x200mm As Per Appendix-A 39 Hss Square Bits C 45 Grade 20X20x200mm As Per Appendix-A 40 Hss Square Bits C 45 Grade 12X12x200 Mm As Per Appendix-A 41 Hss Square Bits C 45 Grade 16X16x200 Mm As Per Appendix-A 42 Hss Square Bits C 45 Grade 8X8x160 Mm As Per Appendix-A 43 Hss Rectangular Bits C 45 Grade 12X3x200mm As Per Appendix-A 44 Parting Blade Hss 25.4X4.76X200 Mm With Holder As Per Appendix-A 45 Parting Blade Hss 25X4.5X150 Mm With Holder As Per Appendix-A 46 3 Jaw Self Centering Lathe Chuck Size 6, Steel Body As Per Appendix-A 47 3 Jaw Self Centering Lathe Chuck Size 8, Steel Body As Per Appendix-A 48 Square End Mill Dia16mm, Oal-250Mm With Collet As Per Appendix-A 49 Collet To Hold End Mill As Per Appendix-A 50 Inserts For Above End Mill As Per Appendix-A. Last date of submission for this tender is 2019-10-03. This is a Cnc Machine tender in Tbrl,ramgarh Range, Panchkula, Haryana