Oil And Natural Gas Corporation Limited

Oil And Natural Gas Corporation Limited has published Bids Are invited for Custom Bid For Services - Arc For Repairs Replacement Of Earthing Systems For A Period Of Three Years At St Installations Of Ahmedabad Asset (2025-28) - Providing And Erecting Earthing With Medium Class ‘B G.I. Earth Pipe 4.125 Metre Long, 40 Mm Internal Dia Including Accessories, And As Per Scope, Drawing And Confirming To Is 3043 1987 Amendments , Providing And Erecting Required Different Size Hot Deep Galvanised Iron Strip For Earthing Of Ht, Ocb/Acb Transformer, Lt Panel Board Motors, Etc. Using Proper Cl Of Various Size As Required , Providing And Erecting New Earth Pit Enclosure Overall Size 650Mmx650mmx300mm With Cover Plate 400 Mm X 400 Mm Chequered Plate 3Mm Complete As Per Drawing & Scope Of Work. , Supplying & Erecting Funnel Type Earthing Having Earth Plate Of Following Size Burred In Specifically Prepared Earth Pit 3 Mtr. Below Ground With 60 Kg. Charcoal And Salt With Alternate Layers Of Charcoal & Salt, 20Mm.Dia. G.I. Pipe With Funnel With A Wire Mesh For Watering & Bricks Masonry Block, C.I. Cover Complete As Per Is 3043 With Necessary Length Of 25X3 Mm Copper Strip Bolted To The Plate And Covered In 12 Mm Dia. G.I. Pipe 2.5 Mtr Long As Per Scope Of Work (As Per Drawing) With Following Specification . (C) With 60 X 60X 0.315 Cms. Copper Earth Plate , Providing And Erecting Required Size Copper Strip Size Diferrent Sizes For Earthing Of H.T. Ocb / Acb/ Transformer, Lt Panel Board, Motors Etc. Using Copper Cl . , Providing And Erecting Earthing With Medium Class ‘B G.I. Earth Pipe 2.5 Metre Long, 40 Mm Internal Dia Including Accessories And As Per Scope Of Work. , Supply & Erecting Of New Top Cover Plate 400 Mm X 400 Mm Size Including White Paint And Touching Civil Cement Work As Per Requirement If Damaged For As Per Scope Of Work [Repairing With Top Cover] , Repairs Of The Earth Pit Chamber Including Outside Painting And Touching Civil Cement Work As Per Requirement If Damaged For As Per Scope Of Work [Only Repair] , Retrieveing Of One No. Gi Earthing Pipes For 4.125 Meter Length After Necessary Disconnections And Re-Erecting This Gi Earthing Pipe At Other Place Inside The Installation Including Shifting Of Chamber If In Good Condition As Per The Instruction Of E-I-C . The Job Includes Providing Necessary Salt And Charcoal For The Earth Pit Dug To Necessary Depth As Per Drawing To Maintain The Earth Resistance Below 2 Ohms At New Erection Place And Re-Connecting The Existing Gi Strip If Available. Gi Strip & Chamber If Not Available At New Location Is To Be Provided Seperately As Per Schedule Item Of Work , Retrieveing Of One Gi Earthing Pipes For 4.125 Meter Length After Necessary Disconnections And Re-Erecting This Gi Earthing Pipe At Other Place Outside The Installation Including Shifting Of Chamber If In Good Condition As Per The Instruction Of E-I-C . The Job Includes Providing Necessary Salt And Charcoal For The Earth Pit Dug To Necessary Depth As Per Drawing To Maintain The Earth Resistance Below 2 Ohms At New Erection Place And Re-Connecting The Existing Gi Strip If Available. Gi Strip & Chamber If Not Available At New Location Is To Be Provided Seperately As Per Schedule Item Of Work , Retrieveing Of One No. Gi Earthing Pipes For 2.5 Meter Length After Necessary Disconnection Of Gi Strip And Re-Erecting This Gi Earthing Pipe At Other Place Outside The Installationas Per The Instruction Of E-I-C . The Job Includes Digging Pit As Per Drawing At Relocated Place , Providing Necessary Salt And Charcoal For This Earth Pit To Maintain The Earth Resistance Below 2 Ohms At New Erected Place And Re-Connecting The Existing Gi Strip . , Dismantling The Existing Gi Or Copper Strip After Disconnections , Re-Laying And Reconnecting Them Back Properly Including Associated Jobs Requied Like Cutting. Bending, Drilling New Holes And With Necessary Additional Hardware Nut-Bolts Washers Required On A New Route As Per The Instruction Of E-I-C. , Painting The Number And Words For Inventory Identification On Erected Fittings / Equipments Or Such Accessories As May Required With Good Quality Of Enamelled Paint As Directed By Engineer In Charge. , (I) Up To 20 Characters, Up To 50 Mm Height. , (Ii) Add. For Additional Character. , (Iii) Add For Additional Each 25Mm. Height , Supply & Installation Of Pre-Cast Rcc Chamber Cover For Earthing:-Supply Of Pre- Cast Rcc 1000 X 400 X 100 Mm Size Chamber Cover Of Existing Earthing. , Providing And Erecting Isi Marked, 1.5Kv Grade Electrolyte Multi Stranded, Annealed Copper Conductor With Heat Resistant Green Coloured Pvc Insulated Conforms To Is 694, Iec - 227 Erected In Existing Pipe Of Following Size With Required Size Of Copper Lugs, Nuts And Bolts(Seperate Supplied Items) If Required.[For Motors, La] , (A) One Wire 1.50 Sq. Mm , (B) One Wire 2.50 Sq. Mm , (C) One Wire 6.00 Sq. Mm , (D) One Wire 10.00 Sq. Mm , (E) One Wire 16.00 Sq. Mm , (F) One Wire 25.00 Sq. Mm , (G) One Wire 70.00 Sq. Mm , (H) One Wire 95.00 Sq. Mm , (I) One Wire 120.00 Sq. Mm , (J) One Wire 150.00 Sq. Mm , Solder Less Crimping Type Copper Lugs Conforming To Is Suitable For Cable Of Following Size Evenly Crimped With High Pressure Tool & Connected To Switchgear Terminals With Brass/Cadmium Plated Nut Bolts In An Approved Manner As Per Required Sizes. , (A) 1.5/2.5 To 6 Sq.Mm , (B) 10 Sq.Mm , (C) 16 Sq.Mm. , (D) 25 Sq.Mm. , (E) 35/50 Sq.Mm. , (F) 70 Sq.Mm. , (G) 95 Sq.Mm. , (H) 120 Sq.Mm. , (I) 150 Sq.Mm. , Providing And Erecting Pipe Type Earthing Having 150 Cms.Long And 2.5 Cms. Dia. Galvanised Iron Pipe With Coupling And Buch Buried In Specially Prepared Earth Pit Complete As Per Scope Of Work , Providing , Erecting , Fabricating The M.S. Structure As Per Requirement On Site Incorporating Proper Size Of M.S. Angles,Square,Round, Flats, Bars, Channels, Sections Complete With Cutting, Welding, Grinding & Finishing Duly Painted With One Coat Of Red Oxide With Erection On Site As Per Direction Of Engineer In Charge With Necessary Grouting, Cementing, Plastering & Finishing Complete For Numbering Of Earthings] , Providing Crocodile Cl And Required Size Copper Pvc Insulated Wire (Separate )At Tanker Loading Points , Providing And Fixing Of Gi Sheet Of Dimension 250X50x1 Mm, Making Necessary Cut/Hole (As Per Stud/Bolt Size-Nominal Ø25mm), Complete With All Necessary Cutting, Rounding & Finishing (With No Cutting Edge) Of Length 250 Mm (Along With Necessary Flat Washers / Spring Washers) To Be Fitted In Flanges In Oil And Gas Manifolds / Lines At Production Installations As Per Drawing & Specification Attached.. Last date of submission for this tender is 2026-07-04. This is a Electrical Spares tender in Ahmedabad, Gujarat