Health And Family Welfare Department

Health And Family Welfare Department has published Bids Are Invited For Cementless Hip System-- 1 Usfda Approved Cementless Mullar Design Femur Prosthesis Made From Ti6al4v Eli Alloy With Osprovit Hydroxyappetite Coating By Plasma Spray Method In Complaiance With Iso 13779-2Or3or4 And With Verical Amd Horizontal Grooves Available In Normal And Varus Offset Length 160Mm And Normal Offset 42Mm 2 Usfda Approved Cementless Mullar Design Femur Prosthesis Made From Ti6al4v Eli Alloy With Osprovit Hydroxyappetite Coating By Plasma Spray Method In Complaiance With Iso 13779-2Or3or4 And With Verical And Horizontal Grooves Available In Normal And Varus Offset Length 165Mm And Normal Offset 43Mm 3 Usfda Approved Cementless 180Degree Acetabular Component With Transference Taper Locktechnology Snap Fit Rim Locking And Tab Locking The Outer Surface Is Coated With 0.5Mm Plus Or Minus 0.100 Mm Thick Commercially Pure Titanium Ti Growth C Which Meets The Requirement Of Astm F1580 Should Have 36Mm Inner Diameter With 52Mm Outer Diameter Should Have Option Of 28Mm And 32Mm Inner Diameter As Well 4 Usfda Approved Cementless 180Degree Acetabular Component With Transference Taper Locktechnology Snap Fit Rim Locking And Tab Locking The Outer Surface Is Coated With 0.5Mm Plus Or Minus0.100 Mm Thick Commercially Pure Titanium Ti Growth C Which Meets The Requirement Of Astm F1580 Should Have 36Mm Inner Diameter With 54Mm Outer Diameter Should Have Option Of 28Mm And 32Mm Inner Diameter As Well 5 Usfda Approved Xlpe Single Shot 9Mrads Uhmwp Pe Insert With 5.5Mm Thickness In Load Area And Transference Taper Locktechnology Single Insert Can Be Used For 46Mm And 48Mm Outer Diameter Acetabular Component With 32Mm Modular Head Option Of 28Mm And 22Mm Modular Head Should Also Be Available 6 Usfda Approved Cocr Modular Head With 36Mm Extra Neck And Range Of Motion For Flexion Or Extension And Internalor External Rotation Is 186 Degree Compatible To Use With Minimum Acetabular Component Size Of 50Mm 7 Usfda Approved 35Mm Long Flat Head 6.5Mm Titanium Cancellous Bone Screw Compatible With Hemispherical Shape Acetabuar Componenet And Should Avoid Impingment With Pe Insert 8 Fully Titanium Porus Coated Distal Loading Stem With Standard And Lateral Offset Avaialble In Both Monoblock As Well As Modular Neck Option Mono Block Stem Diameter 14 X 225 - Standard Offset 9 The Implants For Meniscus Repair Done Through An Arthroscopic Procedure Should Offer The Implant Should Allow To Repair Meniscus Tears With An All-Inside Arthroscopic Technique. The Implant Should Be A Peek Material Of 1.5Mm And 1.1Mm Size And Low Profile Loaded With A Pre Tied 2-0 Uhmwpe Suture Material That Slides Easily On A Rider Handle The Implant System Should Be A Single Hand Operation And At Ease Of Deploying The Needle Tip Should Crimped To Avoid Pull Back Effect Of Anchor Total Quantity : 36. Last date of submission for this tender is 2022-12-08. This is a Medical Equipment tender in Vadodara, Gujarat