Public Works Department

Public Works Department has published Providing And Fixing Road Furniture Items On Various Roads Under Pwd Division South West Road -I During 2023-24 Sub Division-V New Delhi.- 1 Providing And Fixing Glow Studs Of Size 100X20 Mm Made Of Heavy Duty Body Shall Be Moulded Asa ( Acrylic Styrene Acryloretrite ) Or Hip ( High Impact Polystyrene ) Or Abs Having Electronically Welded Micro-Prismatic Lens With Abrasion Resistant Coating As Approved By Engineer In Charge. The Glow Stud Shall Support A Load Of 13635Kg Tested In Accordance With Astm D4280.The Slope Of Retro- Reflective Surface Shall Be 35 ( + / -5 ) Degrees To Base .The Reflective Panels On Both Sides With At Least 12Cm Of Reflective Area Up Each Side. The Luminance Intensity Should Be As Per The Specification And Shall Be Tested As Described In Astm I: 809 As Recommended In Bs: 873 Part 4 :1973. The Studs Shall Be Fixed To The Road Surface Using The Adhesive Conforming To Is, As Per Procedure Recommended By The Manufacturer Complete And As Per Direction Of Engineer-In-Charge. 2 Providing And Fixing Post Delineators Made Of Abs Round Body Fitted With 2 Nos 100 Mm Dia High Reflective Reflectors And Mounted On Ms Pipe Of 65 Mm Dia Duly Powder Coated Anti-Rust And Anti Theft Steel To Be Installed As Per Direction Of Engineer-In-Charge. 3 Providing And Fixingpvc Flexible Pu Orange Spring Post, For Road Safety, 750 Mm, 1000 Mm As Per Direction Of Engineer-In-Charge. Rate Shall Include All Taxes, Loading, Unloading And Carriage To Pwd Store / Site As Per Direction Of Engineer-In-Charge. ( Nothing Extra Shall Be Paid On Any Other Account ) 4 Providing And Fixing Of Flexible Medan Markers As Per Irc 79:2019 Which Shall Be Made Of Combination Of Tough, High Impact Resistant Molded Thermoplastic Body Along With Florescent Yellow Color Retro-Reflective Type Xi Sheeting With Minimum Exposed Reflective Area 90 Cm Square And With Rebound Property. The Reflective Sheeting Should Confirm To Type Xi Florescent Yellow Sheeting As Per Irc 67 2012 And Astm D4956-11. The Flexible Median Marker Shall Have Overall Height Of Minimum 180 Mm, Width Of Minimum 120 Mm & Body Thickness Of Medium 6.5 Mm And Shank Depth Of Minimum 30Mm & Dia Of Shank Shall Not Be Less Than 18 Mm. The Retro-Reflective Sheeting Shall Be On Both Sides Of The Flexible Median Marker And Shall Be Edge Protected With No Exposed Edges Which Will Prevent Edge Lifting, Vandalism, Sheeting Damage, Etc. The Edge Of Sheeting Should Not Come Out Easily By Putting Nails, Sharp Objects Etc. The Logo Of The Manufacturer Shall Be Impressed On Either Side Of The Body. The Flexible Median Marker Shall Be Tested For Rebound Ability And Tensile Test From Government Laboratory As Per Requirement Of Irc 79-2019. 5 Providing & Fixing Solar Stud Made From Dark Eye Make Pelli Stud Made Of Abs Material Having High Wear Resistance & Impact Strenght To Bear Havy Loads Weight Is 58 Gms. Available In Yellow & White Colours. Made From Aluminium Alloy And Pc Construction. Solar Powered By Monocrystal Solar Panel. Type Of Battery: One High Capacity Ni-Cd Rechargeable Battery View Distance: Approximate 1000 Mtrs. Leds - 010 Mm, 3 Pieces Each Side And Total 6 Pieces Are Used For High Brightness Of Diffierent Colours Back Up 12 Hours Of Continuous Lighting At Night. Mounted On Concrete Or Muddy Ground. Water Proof & Hardness Tested. Available In Red & Amber Colours, Having Width 122.5 Mm And Lenght 132.5 Mm And Height 55 Mm Having Stap Dia 26 Mm, As Per Direction Of Engineer-In-Charge.. Last date of submission for this tender is 2023-08-19. This is a Road Furniture tender in Delhi, Delhi