Municipal Corporation Of Delhi

Municipal Corporation Of Delhi has published Tender For Repair And Maintenance Of Electrical Installations Of B-4 Type Iv Mpl Staff Quarter, Soami Nagar In Ward No. 172 Under South Zone.; 1 Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with piano type switch, phenolic laminated sheet, suitablesize M.S. boxand earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.Group C 2 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required. 2x2.5 sq.mm + 1x2.5 sq.mm earth wire 3 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required. 2 X 4 sq. mm + 1 X 4 sq. mm earth wire 4 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required. 2 X 10 sq. mm + 1 X 6 sq. mm earth wire 5 Rewiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable and 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable as earth wire in existing surface/ recessed steel/PVC conduit including dismantling as required.Group C 6 Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.3 x 2.5 sq. mm 7 Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.3 x 4 sq. mm 8 Supplying and fixing call bell/ buzzer suitable for single phase, 230 volts, complete as required. 9 Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCBIRCCB/Isolator12 way, Double door 10 Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, C curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Single pole 11 Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.63 amps 12 Supplying and fixing following rating, double pole, (single phase and neutral), 240 volts, residual current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required.63 amps 13 Supplying and fixing 20 amps, 240 volts, SPN industrial type, socket outlet, with 2 pole and earth,metal enclosed plug top along with 20 amps C curve, SP, MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required. 14 Installation of exhaust fan in the existing opening, including making good the damage connection testing, commissioning etc. as required.Upto 450 mm sweep 15 Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.25 mm 16 Supplying and fixing metal box of 150mm X 75mm X 60mm deep (Nominalsize) on surface or in recess with suitable size of phenolic lminated sheet cover in frontincluding providing and fixing 3 pin 5/6 A socket outlet and 5/6 Apiano type switch, connections, painting etc. as reqd. 17 Supplying and fixing metal box of 180mm X 100mm X 60mm deep (Nominalsize) on surface or in recess with suitable size of phenolic lminated sheet cover in frontincluding providing and fixing 6 pin 5/6& 15/16 A socket outlet and 15/16 Apiano type switch, connections, painting etc. as reqd. 18 Supplying and fixing following piano type switch/ socket on the existing switch box/coverincluding connections etc. as required.5/6 amp switch 19 Supplying and fixing following piano type switch/ socket on the existing switch box/coverincluding connections etc. as required. 15/16 amp switch 20 Supplying and fixing following piano type switch/ socket on the existing switch box/coverincluding connections etc. as required. 3 pin5/6 A socket outlet 21 Supplying and fixing following piano type switch/ socket on the existing switch box/coverincluding connections etc. as required. 6 pin15/16 A socket outlet 22 Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excuding modular plates etc as reqd. 23 3 mm thick phenolic laminated sheet 24 LED Batten light (System lumen efficacy ≥105 <120 lm/Watt) Supplying, installation, Testing & Commissioning of LED surface mounted Batten light of following body material and construction as per IS : 10322 with driver (Replaceable) as per the requirement with Driver efficiency >85% ,Operating voltage AC 140-270 Volt, freq 50/60 hz, Operating temprange -15 deg to 40 deg centigrade, internal surge protection of 2.5 KV with Short & Open circuit protection ,THD < 10% , P. F.≥0.95, IP20, CRI >80, Flicker free, (flicker should be below 5 %), life time (LED,Driver & electrical circuitary), of minimum 50000 Burning Hours with , 70% of initial Lumen maintained till life ends, CCT 3000°K / 4000°K / 5700°K /6000°K/6500°K (As per ANSI Bin), SDCM(Standard Deviation Color Matching) <3, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard and trade mark certificate ( T.C.). Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing. complete in all respect i/c connections with 1.5 sq mm FRLS, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEMwarranty. System lumen efficacy ≥105 <120 lm/Watt output . LM79 & LM80 Test report from NABL lab for all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminum housing such that LED junction temperature shall not rise above 90°C).Powder coated die cast / Extruded aluminium Body (Thickness ≥ 1.20 mm) 18- 22 watt 25 Supply of 250 mm (10 inch) sweep 1250 rpm exhaust fan Fresh Air Type complete with shutter blades etc. as required. 26 Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm ) with 1.5 sqmm FRLS PVC insulated , copper conductor , single core cable, including providing and fixing phenolic laminated sheet cover on the fan box etc as required. 27 Supply of 1200 mm sweep 50 watt, Energy saver ISIS marked BEE 5 star rating AC Ceiling fan suitable for 230 V , 50 Hertz AC supply without regulator with blades, downrod etc. complete as required. . Last date of submission for this tender is 2025-11-10. This is a Building Work tender in Delhi, Delhi