Military Engineer Services

Military Engineer Services has published Consultancy For Rehabilitation And Re-Strengthening Of Building No P-7 , P-9 , P-18 , P-19 P-22 At Basantar Line Under Ge ( West ) , Delhi Cantt , 1 . Survey For Condition Of Bldgs: To Carry Out A Detailed Visual Inspection For Surface Damages , Cracks , Seepage , Local Weakness And To Identity Locations Of Structural And Functional Distress And Locations Supected To Develop Structural And Functional Distress Of The Buildings . 2 . Non-Destructinve Tests ( Ndt ) : Non Destructive Evaluation Of The Structural Elements By Various Tests As Required Location And Structural Assessment Based On These Parameters . 3 . Rebound Hammer Test : To Check The Compressive Strenght Of Concrete As Per Is-13311-1992 Part Ii . 4 . Ultrasonic Pulse Velocity ( Upv ) : As Per Is-516 , Measurements On The Rcc Elements To Find Out The Quality Of Concrete . 5 . Ferroscanning : To Locate The Rcc Elements And To Check Steel Bars And Its Dtails Like Spacing Cover And Approx Diameter . 6 . Carbonation : To Check The Penetration Depth Of Carbonation In Concrete . 7 . Core Cutting & Compressive Strenght Test : Take Out The Sample Of Cylindrical Concrete And Carry Out Compressive Strength Test At A Minimum Of One Location Per Dwelling Unit . 8 . Corrosion Monitoring : To Measure The Risk And Rate Of Corrosiooin Of Steel In Concrete By Half Cell Potential Of Reinforcement To Assess The Risk Of Corrosion . 9 . Concrete Cover Measurement : Measurement Of Thickness Of Concrete Cover To Reinforcement Bars By Cover Meter Test . 10 . Chemical Analysis : To Draw Samples Of Concrete And Carry Out Chemical Analysis Of The Sample Including Measurement Of Chloride Content . 11 . Themographic Imaging : For Inspection Of Moisture/Dampness In The Structures For Pin Pointing The Moisture Trail . 12 . Structural Evaluation And Retrofitting Scheme : This Would Include Assessment Of Adequacy Of Existing Structural Components And Providing Retrofitting Scheme To Strengthen The Inadequate Structural Compoments Including Repair Methodology , Preparatin Of Bill Of Quantitites ( Boo ) , Specification For The Work , Methodology , Preparation Of Bill Of Quantities ( Boq ) , Specification For The Work . Report Must Be Submitted In Quadruplicate . Note :- Term & Condition Also Attached . . Last date of submission for this tender is 2020-04-02. This is a Forming Tools tender in Delhi Cantt, Delhi