Madhya Pradesh Bhawan

Madhya Pradesh Bhawan has published Tender for Supply, Installation And Commissioning Of Furniture Items At Special Commissioner Office, 1St Floor, Office Block 3, East Kidwai Nagar, New Delhi , Revolving Chair Type-1 Revolving Chair- Size- H: 1210-1330Mm, Seat H: 465-585Mm, D- 690Mm, W- 640Mm. Executive Hi-Back Chair With Bio Synchro Mechanism Spring Tention Auto Adjusted According To Weight Of Body. Pu Padded Seat & Pp Back With Mesh Fabric - Lumber Support In Built. Head Rest With D-Direction Adjustment. With 3- Direction Adjustment Arm Restoration 5-Prong Nylon Base For Stability. Twin Wheel Heavy Duty Castor For Easy Mobility Under Load. Quality Tapestry. High Density Moulded Pu Cushion. The Item Should Be From The Approved Make Of Durian/ Godrej/ Hni/ Herman Miller/ Steelcase Or Equivalent Make. , Executive Table Executive Table- Overall Size: Table - Lenght-2100Mm X Width-900Mm X Height-750Mm, Side Runner -Width- 1200Mm X Depth-450Mm X Height-750Mm, Back Runner- Width-1650Mm X Depth-450Mm X Height-750Mm, Corner Unit - Lenght-450Mm X Width-450Mm X Height-750Mm, 3Drawer Pedestal Size- Width-450Mm X Depth-540Mm X Height-650Mm, Table- Made Of Bwr Ply Wood Laminated With Good Quality Mm Thk Laminate Fitted With 25Mm Thick Mdf Fascia Duly Deco Painted. Door & Drawer Front Made Of 18 Mm Thk Bslpb. Top Of Desk And Cabinet Made Of 12Mm Thk Clear Float Glass. Product Must Be In Compliance With Drawing And As Per Architect Instruction Complete Product Must Be Knockdown Type In Construction. The Item Should Be From The Approved Make Of Durian/ Godrej/ Hni/ Herman Miller/ Steelcase Or Equivalent Make. , Reception Desk Reception Desk-1500- Overall Size: - W:1500Mm, D:750Mm / 832 Mm, 1200Ht Top D:728 Mm. Top Made Of 25 Mm Thick Pre- Laminated Particle Board. Pvc Edge Beading Of 2 Mm Edges By Through Feed Machine. Provision Of Cable Manager As Per L.H. Or R.H. Side Requirement. Provide Duct For Wire Management. Front Covered By L-Shape Wooden Box Size-H-1200 Mm, W-600 Mm, D- 300 Mm Mobile Pedestal Unit Plpb- Size: Height:650Mm, Width:400Mm, Depth:450Mm Top Made Of 18Mm Thick Pre- Laminated Particle Board. Side, Back And Drawer Front Are Made By 18Mm Thk. Pre-Laminated Particle Board. Metallic Finish Heavy Duty Handle. Superior Quality Makes Front Mounted Lock. Provision Of Casters For Mobility. Special Drawer Slides For Filing Drawer. Other Drawers On Roller Slides. The Item Should Be From The Approved Make Of Durian/ Godrej/ Hni/ Herman Miller/ Steelcase Or Equivalent Make. , Workstation On 1 Seater With Keyboard Tray Cpu Trolly & Mobile Pedestal Drawer Workstation - 1 Seater With Keyboard Tray, Cpu Trolly & Wooden Mobile Pedestal, Overall Size- L-1640 Mm, D-820Mm, H- 1215Mm, Working H 750Mm, Top Made Of Pre Laminated Particle Board With Pvc Edge Beading. Understructure Also Made Up Of Pre Laminated Particle Board With Pvc Edge Beading. Top- Size: - 1500X750x25 Mm Thk. Pre-Laminated Particle Board. Side Edges Covered By 2 Mm Thick Pvc Edge Beading By Through Feed Machine. 70Mm Thick Tiles Base Partition- Internal Frame Are Made By 1.6Mm Thk. Cold Rolled Close Annealed Powder Coated Sections. Tiles Are Made By 12Mm. Thk. Pre Laminate Particle Board. Tiles Are Also Available In Glass, Fabric And Steel Option. Frame Structure Are Fabricated By Mig/Tig Welding Machine. Tiles Are Fitted By High Strength Pvc Dowel In Pvc Insert With Transition Fit. Provision Of Slot For Cabling And Accessories. Upper And Side Trim Are 1Mm Thk. Extruded Powder Coated Aluminium Section And Pole Is 1.6Mm Thick Aluminium. Mobile Pedestal Unit Plpb- Size: Height:650Mm, Width:400Mm, Depth:450Mm Top Made Of 18Mm Thick Pre- Laminated Particle Board. Side, Back And Drawer Front Are Made By 18Mm Thk. Pre-Laminated Particle Board. Metallic Finish Heavy Duty Handle. Superior Quality Makes Front Mounted Lock. Provision Of Casters For Mobility. Special Drawer Slides For Filing Drawer. Other Drawers On Roller Slides. The Item Should Be From The Approved Make Of Durian/ Godrej/ Hni/ Herman Miller/ Steelcase Or Equivalent Make. , Revolving Chair Type-2 Size- H: 1130-1230Mm, Seat H: 500-600Mm, D-550Mm, W- 630Mm. 5- Prong Nylon Base For Stability. Twin Wheel Heavy Duty Castor For Easy Mobility Under Load. Seat Hot Pressed Ply Wood With Steel T- Nuts For Rigid Fastening With Pp Cover. Back Is Nylon Fitted With Mesh Cloth. Sturdy Steel Column Gas Lift For Centre Support And Seat Height Adjustment. Telescopic Abs Cover Over Steel Column. Three Position Lockable Synchrony Tilt Mechanism, With 3-D Arm Rest Adjustable With Pu Pad. Quality Tapestry. High Density Moulded Pu Cushion. Upholstery 0.85 Mtr. The Item Should Be From The Approved Make Of Durian/ Godrej/ Hni/ Herman Miller/ Steelcase Or Equivalent Make. , Metal Storage Cabinet Type-1 Size: -Height:1980Mm Width:910Mm Depth:485Mm Body Part Made-Up Of Prime Quality Cold Rolled Close Annealed Sheet Use Only Mig/Tig & Spot Welding For Fabrication.4 Adjustable Shelf. Three Way Locking Device With Six Levers Superior Quality Lock For Door. Doors Are Mounted On Steel Hinge Brackets. Body 22 Gauge, Door 20 Gauge. All Steel Components Are Epoxy Powder Coated Followed By Seven Tanks Anti Corrosion Treatment Of Surface. The Item Should Be From The Approved Make Of Durian/ Godrej/ Hni/ Herman Miller/ Steelcase Or Equivalent Make. , Metal Storage Cabinet Type-2 Size: -Height:1980Mm, Width:910Mm Depth:380Mm Body Part Made-Up Of Prime Quality Cold Rolled Close Annealed Sheet Use Only Mig/Tig & Spot Welding For Fabrication.5 Adjustable Shelf. Three Way Locking Device With Six Levers Superior Quality Lock For Door. Doors Made Of Press Formed Ms Cold Rolled Close Annealed Sections With 4Mm Glass. Doors Are Mounted On Steel Hinge Brackets. All Steel Components Are Epoxy Powder Coated Followed By Seven Tanks Anti Corrosion Treatment Of Surface. The Item Should Be From The Approved Make Of Durian/ Godrej/ Hni/ Herman Miller/ Steelcase Or Equivalent Make. , Mobile Pedestal Unit Metal Mobile Pedestal Unit Metal- Size: Height: 610M, Width: 400Mm, Depth :450Mm, Body Part Made-Up Of Prime Quality Cold Rolled Close Annealed Sheet Use Only Mig/Tig & Sport Welding For Fabrication, Body Made Of 0.8Mm Thick Cold Rolled Close Annealed Sheet. Drawer With Telescopic Channel Slides. Superior Quality Makes Multi Drawer Front Lock. Drawer Front In Cold Rolled Close Annealed M.S. Sheet 0.8Mm Thk. Provision Of Casters For Mobility. All Steel Components Are Epoxy Powder Coated Followed By Seven Tank Anti Corrosion Treatment Of Surface. The Item Should Be From The Approved Make Of Durian/ Godrej/ Hni/ Herman Miller/ Steelcase Or Equivalent Make. , Locker Main Unit With 6 Door Locker Main Unit With 6 Door- Size: - Height:1950Mm, Width:380Mm, Depth:450Mm (6 Door), Body Part Made-Up Of Prime Quality Cold Rolled Close Annealed Sheet Of 1Mm & 0.8Mm Thickness, Use Only Spot Welding For Fabrication. Knockdown Constructions, Individual Compartment Having Individual Door, With Six Levers Superior Quality Lock. Special Holes Are Provided In Doors For Ventilation. Doors Are Mounted On Pivot With Steel Handle. All Steel Components Are Epoxy Powder Coated Followed By Seven Tanks Anti Corrosion Treatment Of Surface. The Item Should Be From The Approved Make Of Durian/ Godrej/ Hni/ Herman Miller/ Steelcase Or Equivalent Make.. Last date of submission for this tender is 2026-06-22. This is a Furnitures tender in New Delhi, Delhi