Irrigation And Flood Control Department

Irrigation And Flood Control Department has published Development Of 03 Nos. Parks By Providing And Fixing Outdoor Exercise Equipments Along Left Bank Of Supplementary Drain At Rd 34100M,Rd33600m, And Rd32420m In Vikaspuri Assembly Constituency Ac 31 Mla Lad Work- 1 Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge. All kinds of soil 2 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size 3 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:6 (1 cement : 6 coarse sand). 4 Supplying and filling in plinth withsand under floors, including watering, ramming, consolidating and dressing complete. 5 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size). 6 Providing and Fixing36mm thick EPDM(EthylenePropyleneDeineMonomer)Rubber Flooring on existing surface in required colour and shape.The EPDM rubber flooring should be laid at site indual colour and pattern as per the direction of theEngineer-in Charge. All complete fixing of equipment in foundation is to be done as per manufacture specification. 7 Supply and fixing ofArihant /Kompon /Landscape /Koochie / Hugo / Grandslam Fitness Make or equivalent as per direction of Engineer in Charge Big Shoulder Axial Machine: The product to match the colours, design, size, contours and aesthetics exactly as per the image attached. All components designed and manufactured to meet with EN 16630 safety standards. The EN 16630 certificates must be issued by a reputed notified International Certifying Body such as IPEMA, TUV, CPSC, or SGS only. The Product uses Teflon resistance bearings. Dedicated fabrication moulds and jigs for retaining the accuracy and repeatability of the production process. Innovative thermal zinc coating allows full and complete coverage. Zinc injection has been salt spray tested to meet ASTM B117 and ISO 9227 (48 hours) standard with a minimum thickness 40-60 micron. DUPONT ALESTA AD Powder coating for architectural use. Made from carboxyl polyester and TGIC for a thickness of 50 to 70 microns. Handles are made of HDPE handles with free rotate Grips. S-Torx anti Vandal fastners are used in which the nuts are all enclosed in Polyamid anti vandal caps. The Dia of the material is of 89mm, Thickness is 3mm, 60/48/38 Connectors, 10/8 mm steel plates and the material is also CNC laser cut. All components designed and manufactured to meet with EN 16630 safety standards. Samples to be produced to the department before supply. 8 Supply and fixing ofArihant /Kompon /Landscape /Koochie / Hugo / Grandslam Fitness Make or equivalent as per direction of Engineer in Charge 2 Person Tai Chi Teflon Resistance Trainer: The product to match the colours, design, size, contours and aesthetics exactly as per the image attached. All components designed and manufactured to meet with EN 16630 safety standards. The EN 16630 certificates must be issued by a reputed notified International Certifying Body such as IPEMA, TUV, CPSC, or SGS only. The Product uses Teflon resistance bearings. Dedicated fabrication moulds and jigs for retaining the accuracy and repeatability of the production process. Innovative thermal zinc coating allows full and complete coverage. Zinc injection has been salt spray tested to meet ASTM B117 and ISO 9227 (48 hours) standard with a minimum thickness 40-60 micron. DUPONT ALESTA AD Powder coating for architectural use. Made from carboxyl polyester and TGIC for a thickness of 50 to 70 microns. Handles are made of HDPE handles with free rotate Grips. S-Torx anti Vandal fastners are used in which the nuts are all enclosed in Polyamid anti Vandal caps. The Dia of the material is of 89mm, Thickness is 3mm, 60/48/38 Connectors, 10/8 mm steel plates and the material is also CNC laser cut. All components designed and manufactured to meet with EN 16630 safety standards. Samples to be produced to the department before supply. 9 Supply and fixing ofArihant /Kompon /Landscape /Koochie / Hugo / Grandslam Fitness Make or equivalent as per direction of Engineer in Charge Resistance Foot Cycle: The product to match the colours, design, size, contours and aesthetics exactly as per the image attached. All components designed and manufactured to meet with EN 16630 safety standards. The EN 16630 certificates must be issued by a reputed notified International Certifying Body such as IPEMA, TUV, CPSC, or SGS only. The Product uses Teflon resistance bearings. Dedicated fabrication moulds and jigs for retaining the accuracy and repeatability of the production process. Innovative thermal zinc coating allows full and complete coverage. Zinc injection has been salt spray tested to meet ASTM B117 and ISO 9227 (48 hours) standard with a minimum thickness 40-60 micron. DUPONT ALESTA AD Powder coating for architectural use. Made from carboxyl polyester and TGIC for a thickness of 50 to 70 microns. Handle is made of HDPE sub-seat handle. Grips. S-Torx anti Vandal fastners are used in which the nuts are all enclosed in Polyamid anti Vandal caps. The Dia of the material is of 89mm, Thickness is 3mm, 60/48/38 Connectors, 10/8 mm steel plates and the material is also CNC laser cut. All components designed and manufactured to meet with EN 16630 safety standards. Samples to be produced to the department before supply. 10 Supply and fixing ofArihant /Kompon /Landscape /Koochie / Hugo / Grandslam Fitness Make or equivalent as per direction of Engineer in Charge Aero Walker: The product to match the colours, design, size, contours and aesthetics exactly as per the image attached. All components designed and manufactured to meet with EN 16630 safety standards. The EN 16630 certificates must be issued by a reputed notified International Certifying Body such as IPEMA, TUV, CPSC, or SGS only. The Product uses Unique resistance and safestop, Stopper mechanism which limits unwanted movement, it has cushioned movement edges and prevents wear from colliding frame parts. Dedicated fabrication moulds and jigs for retaining the accuracy and repeatability of the production process. Innovative thermal zinc coating allows full and complete coverage. Zinc injection has been salt spray tested to meet ASTM B117 and ISO 9227 (48 hours) standard with a minimum thickness 40-60 micron. DUPONT ALESTA AD Powder coating for architectural use. Made from carboxyl polyester and TGIC for a thickness of 50 to 70 microns. Handles are made of 3mm Endu-Rubber handles with aluminum cap locking anti vandal system. S-Torx anti Vandal fastners are used in which the nuts are all enclosed in Polyamid anti Vandal caps.The Dia of the material is of 89mm, Thickness is 3mm, 60/48/38 Connectors, 10/8 mm steel plates and the material is also CNC laser cut. All components designed and manufactured to meet with EN 16630 safety standards. Samples to be produced to the department before supply 11 Supply and fixing ofArihant /Kompon /Landscape /Koochie / Hugo / Grandslam Fitness Make or equivalent as per direction of Engineer in Charge 2 person Air Skier: The product to match the colours, design, size, contours and aesthetics exactly as per the image attached. All components designed and manufactured to meet with EN 16630 safety standards. The EN 16630 certificates must be issued by a reputed notified International Certifying Body such as IPEMA, TUV, CPSC, or SGS only. The Product uses Unique resistance and safestop, Stopper mechanism which limits unwanted movement, it has cushioned movement edges and prevents wear from colliding frame parts. Dedicated fabrication moulds and jigs for retaining the accuracy and repeatability of the production process. Innovative thermal zinc coating allows full and complete coverage. Zinc injection has been salt spray tested to meet ASTM B117 and ISO 9227 (48 hours) standard with a minimum thickness 40-60 micron. DUPONT ALESTA AD Powder coating for architectural use. Made from carboxyl polyester and TGIC for a thickness of 50 to 70 microns. Handles are made of 38mm Metal frame. S-Torx anti Vandal fastners are used in which the nuts are all enclosed in Polyamid anti Vandal caps.The Dia of the material is of 89mm, Thickness is 3mm, 60/48/38 Connectors, 10/8 mm steel plates and the material is also CNC laser cut. All components designed and manufactured to meet with EN 16630 safety standards. Samples to be produced to the department before supply. 12 Supply and fixing ofArihant /Kompon /Landscape /Koochie / Hugo / Grandslam Fitness Make or equivalent as per direction of Engineer in Charge 3 Person Body Twister: The product to match the colours, design, size, contours and aesthetics exactly as per the image attached. All components designed and manufactured to meet with EN 16630 safety standards. The EN 16630 certificates must be issued by a reputed notified International Certifying Body such as IPEMA, TUV, CPSC, or SGS only. The Product uses Unique resistance and safestop, Stopper mechanism which limits unwanted movement, it has cushioned movement edges and prevents wear from colliding frame parts. Dedicated fabrication moulds and jigs for retaining the accuracy and repeatability of the production process. Innovative thermal zinc coating allows full and complete coverage. Zinc injection has been salt spray tested to meet ASTM B117 and ISO 9227 (48 hours) standard with a minimum thickness 40-60 micron. DUPONT ALESTA AD Powder coating for architectural use. Made from carboxyl polyester and TGIC for a thickness of 50 to 70 microns. Handles are made of 38mm Metal frame. S-Torx anti Vandal fastners are used in which the nuts are all enclosed in Polyamid anti Vandal caps.The Dia of the material is of 89mm, Thickness is 3mm, 60/48/38 Connectors, 10/8 mm steel plates and the material is also CNC laser cut. All components designed and manufactured to meet with EN 16630 safety standards. Samples to be produced to the department before supply. 13 Supply and fixing ofArihant /Kompon /Landscape /Koochie / Hugo / Grandslam Fitness Make or equivalent as per direction of Engineer in Charge 3 Person Body Twister: The product to match the colours, design, size, contours and aesthetics exactly as per the image attached. All components designed and manufactured to meet with EN 16630 safety standards. The EN 16630 certificates must be issued by a reputed notified International Certifying Body such as IPEMA, TUV, CPSC, or SGS only. The Product uses Unique resistance and safestop, Stopper mechanism which limits unwanted movement, it has cushioned movement edges and prevents wear from colliding frame parts. Dedicated fabrication moulds and jigs for retaining the accuracy and repeatability of the production process. Innovative thermal zinc coating allows full and complete coverage. Zinc injection has been salt spray tested to meet ASTM B117 and ISO 9227 (48 hours) standard with a minimum thickness 40-60 micron. DUPONT ALESTA AD Powder coating for architectural use. Made from carboxyl polyester and TGIC for a thickness of 50 to 70 microns. Handles are made of 38mm Metal frame. S-Torx anti Vandal fastners are used in which the nuts are all enclosed in Polyamid anti Vandal caps.The Dia of the material is of 89mm, Thickness is 3mm, 60/48/38 Connectors, 10/8 mm steel plates and the material is also CNC laser cut. All components designed and manufactured to meet with EN 16630 safety standards. Samples to be produced to the department before supply. 14 Supply and fixing ofArihant /Kompon /Landscape /Koochie / Hugo / Grandslam Fitness Make or equivalent as per direction of Engineer in ChargeDouble sit-up bench: The product to match the colours, design, size, contours and aesthetics exactly as per the image attached. All components designed and manufactured to meet with EN 16630 safety standards. The EN 16630 certificates must be issued by a reputed notified International Certifying Body such as IPEMA, TUV, CPSC, or SGS only. Dedicated fabrication moulds and jigs for retaining the accuracy and repeatability of the production process. Innovative thermal zinc coating allows full and complete coverage. Zinc injection has been salt spray tested to meet ASTM B117 and ISO 9227 (48 hours) standard with a minimum thickness 40-60 micron. DUPONT ALESTA AD Powder coating for architectural use. Made from carboxyl polyester and TGIC for a thickness of 50 to 70 microns. Handles are made of 38mm Metal frame with 304 Stainless leg color covers. S-Torx anti Vandal fastners are used in which the nuts are all enclosed in Polyamid anti Vandal caps.The Dia of the material is of 89mm, Thickness is 3mm, 60/48/38 Connectors, 10/8 mm steel plates and the material is also CNC laser cut. All components designed and manufactured to meet with EN 16630 safety standards. Samples to be produced to the department before supply. 15 Supply and fixing ofArihant /Kompon /Landscape /Koochie / Hugo / Grandslam Fitness Make or equivalent as per direction of Engineer in Charge Elliptical Cross Trainer: The product to match the colours, design, size, contours and aesthetics exactly as per the image attached. All components designed and manufactured to meet with EN 16630 safety standards. The EN 16630 certificates must be issued by a reputed notified International Certifying Body such as IPEMA, TUV, CPSC, or SGS only. The Product uses Teflon resistance bearings. Dedicated fabrication moulds and jigs for retaining the accuracy and repeatability of the production process. Innovative thermal zinc coating allows full and complete coverage. Zinc injection has been salt spray tested to meet ASTM B117 and ISO 9227 (48 hours) standard with a minimum thickness 40-60 micron. DUPONT ALESTA AD Powder coating for architectural use. Made from carboxyl polyester and TGIC for a thickness of 50 to 70 microns. Handles are made of 3mm Endu-Rubber handles with aluminum cap locking anti vandal system. S-Torx anti Vandal fastners are used in which the nuts are all enclosed in Polyamid anti Vandal caps.The Dia of the material is of 89mm, Thickness is 3mm, 60/48/38 Connectors, 10/8 mm steel plates and the material is also CNC laser cut. All components designed and manufactured to meet with EN 16630 safety standards. Samples to be produced to the department before supply. 16 Supply and fixing ofArihant /Kompon /Landscape /Koochie / Hugo / Grandslam Fitness Make or equivalent as per direction of Engineer in Charge 2 Person Ski Trainer Machine: The product to match the colours, design, size, contours and aesthetics exactly as per the image attached. All components designed and manufactured to meet with EN 16630 safety standards. The EN 16630 certificates must be issued by a reputed notified International Certifying Body such as IPEMA, TUV, CPSC, or SGS only. The Product uses Unique resistance and safestop, Stopper mechanism which limits unwanted movement, it has cushioned movement edges and prevents wear from colliding frame parts. Dedicated fabrication moulds and jigs for retaining the accuracy and repeatability of the production process. Innovative thermal zinc coating allows full and complete coverage. Zinc injection has been salt spray tested to meet ASTM B117 and ISO 9227 (48 hours) standard with a minimum thickness 40-60 micron. DUPONT ALESTA AD Powder coating for architectural use. Made from carboxyl polyester and TGIC for a thickness of 50 to 70 microns. Handles are made of 3mm Endu-Rubber handles with aluminum cap locking anti vandal system. S-Torx anti vandal fastners are used in which the nuts are all enclosed in Polyamid anti Vandal caps.The Dia of the material is of 89mm, Thickness is 3mm, 60/48/38 Connectors, 10/8 mm steel plates and the material is also CNC laser cut. All components designed and manufactured to meet with EN 16630 safety standards. Samples to be produced to the department before supply. 17 Supply and fixing ofArihant /Kompon /Landscape /Koochie / Hugo / Grandslam Fitness Make or equivalent as per direction of Engineer in ChargeDouble Shoulder Press Station: The product to match the colours, design, size, contours and aesthetics exactly as per the image attached. All components designed and manufactured to meet with EN 16630 safety standards. The EN 16630 certificates must be issued by a reputed notified International Certifying Body such as IPEMA, TUV, CPSC, or SGS only. The Product uses ARM (Angular Resistance Module). The Angular Resistance Module system consists of several components, metal housing, pin and rubber bar. Resistance keep changing according to the movement degree. It can be moved with 2 directions. Dedicated fabrication moulds and jigs for retaining the accuracy and repeatability of the production process. Innovative thermal zinc coating allows full and complete coverage. Zinc injection has been salt spray tested to meet ASTM B117 and ISO 9227 (48 hours) standard with a minimum thickness 40-60 micron. DUPONT ALESTA AD Powder coating for architectural use. Made from carboxyl polyester and TGIC for a thickness of 50 to 70 microns. Handles are made of 3mm Endu-Rubber handles with aluminum cap locking anti vandal system. S-Torx anti Vandal fastners are used in which the nuts are all enclosed in Polyamid anti Vandal caps.The Dia of the material is of 89mm, Thickness is 3mm, 60/48/38 Connectors, 10/8 mm steel plates and the material is also CNC laser cut. All components designed and manufactured to meet with EN 16630 safety standards. Samples to be produced to the department before supply. 18 Supply and fixing ofArihant /Kompon /Landscape /Koochie / Hugo / Grandslam Fitness Make or equivalent as per direction of Engineer in Charge Double Chest Press Station: The product to match the colours, design, size, contours and aesthetics exactly as per the image attached. All components designed and manufactured to meet with EN 16630 safety standards. The EN 16630 certificates must be issued by a reputed notified International Certifying Body such as IPEMA, TUV, CPSC, or SGS only. The Product uses ARM (Angular Resistance Module). The Angular Resistance Module system consists of several components, metal housing, pin and rubber bar. Resistance keep changing according to the movement degree. It can be moved with 2 directions. Dedicated fabrication moulds and jigs for retaining the accuracy and repeatability of the production process. Innovative thermal zinc coating allows full and complete coverage. Zinc injection has been salt spray tested to meet ASTM B117 and ISO 9227 (48 hours) standard with a minimum thickness 40-60 micron. DUPONT ALESTA AD Powder coating for architectural use. Made from carboxyl polyester and TGIC for a thickness of 50 to 70 microns. Handles are made of 3mm Endu-Rubber handles with aluminum cap locking anti vandal system. S-Torx anti Vandal fastners are used in which the nuts are all enclosed in Polyamid anti Vandal caps.The Dia of the material is of 89mm, Thickness is 3mm, 60/48/38 Connectors, 10/8 mm steel plates and the material is also CNC laser cut. All components designed and manufactured to meet with EN 16630 safety standards. Samples to be produced to the department before supply. 19 Supply and fixing ofArihant /Kompon /Landscape /Koochie / Hugo / Grandslam Fitness Make or equivalent as per direction of Engineer in Charge 180cm slide. 20 Supply and fixing ofArihant /Kompon /Landscape /Koochie / Hugo / Grandslam Fitness Make or equivalent as per direction of Engineer in Charge Two seater sea saw. . Last date of submission for this tender is 2024-11-26. This is a Gardening tender in Delhi, Delhi