Indian Army

Indian Army has published Bids Are Invited For Demolition Plaster - Taking Down Cement Plaster From Brick Or Stone Masonry Or Concrete Surfaces And Hacking For Key And Scrubbing Down With Water Etc All As Specified (Note:- Taking Down Plastering Work To Be Done Upto Height Of 30 Mtr For Rcc Oht As Per Site Requirement.). , Cutting Opening - M&L For Cutting Openings Through Walls For The Fixing Of Rcc Slabs Including Providing, Fixing And Removing, Shoring, Cleaning And Stacking Stone And Removing Surplus To Store And Rubbish Off The Premises , Form Work - M&L For Formwork To Soffits Of Suspended Slabs Such As Roof Slabs, Floor Slabs, Landings And Similar Work; Not Exceeding 200M Thick (Horizontal Or Sloping) All As Specified And Directed By Engr-In-Charge , Pcc_1 - Providing, Precast Cement Concrete1:2:4 Type B1 (20 Mm Graded Aggregate) In Landings, Cover Slabs (For Manholes Etc.) Chullah Hoods, Chajjas, Water Troughs, Mangers, Shelves And Similar Articles With Plain Faces Etc. And Setting In Mortar Complete With Joints To Match , Tmt Bar - M&L For Mild Steel Tmt Bars 10 Mm Dia And Over Cut To Length Bent To Shape And Required Including Cranking Bending Spirally For Hoping For Columns Hooking Ends And Binding With And Including Mild Steel Wire N. Less Than .9Mm Dia Or Securing With Clips Complete. , Rendering 10 Mm - M&L 10 Mm Thick Rendering In Cm 1:6 On Concrete Surfaces Comlete All As Specified And Directed By Engr-In-Charge , At Traeatment - M&L For Att Of Voids In Masonry Using Chemical Emulsion (Chloropyriphous 20 Ec) One Litre Per Hole, At 300Mm Intervals Including Drilling Holes At 45 Degree And Replugging Them With Cement Mortar 1:2 (1 Cement : 2 Coarse Sand) To Match The Existing Floors , Rendering_15 Mm - M/L Rendering 15 Mm Thick Cement Mortar On Brick Masonary Surfaces Or Surfaces Other Than Fair Faces Of Brick Work In Cement Mortar 1:4Including With Mixing Of Water Proofing Liquid Of Dr. Fixit Qty As Per Manufactrer Instruction As Backing Coat To Glazed Tile Complete All As Specified And Directed , Digital Tiles - M&L Fordigital Glazed Ceramic Tiles Coloured Size350x 250X 7 Mm/ 450X 350X 7Mm Thickas On Vertical Surfaces, Of Walls As In Skirting, Dado Etcset And Jointed In Neat Cement Slurry & Pointed With Colouredcement To Match Complete All As Specified And Directed , Non Skid Tiles - M&L Forcoloured Printed Non Skid Tiles Area Of Each Tile Exceeding Exc 0.06 Sqmbut N.Exc 0.11 Sqm In Floors Etc Set And Jointed With Neat Cement Slurry Pointed With Colour Cement To Match The Floor, And Including 15 Mm Thick Screed Bed Cement Mortar In Cm 1:4 And Including The Chipping Of The Existing Pcc Floor Complete All As Specified , Pvc_Door - S&F Factory Made Wood Grained Printed Colour Solid Panel Pvc Door Shutter 30 Mm Thick (Style) Consisting Of Frame Made Out Of M.S. Tubes For Top & Bottom Rails. M.S. Frame Shall Be Covered With Heat Moulded Plain Colour Pvc ‘C’ Channel Having A Wood Grained Colour Pvc Sheet Strip Of 20Mm Width Stuck Inside With Solvent Cement For Stiles And Plain Colour Pvc Sheets For Top Rail,Lock Rail & Bottom Rail On Either Side & As Gap Insert For Top Rail & Bottom Rail; Panelling Of Plain Colour Pvc Sheet To Be Fitted In The M.S. Frame Welded / Sealed To The Stiles & Rails With Suitable Pvc Sheet Beading, And Joined Together With Solvent Cement, Suppling & Fixing In The Frame At Site As Per Specification & Drawing , Pvc Frame - S&F Wood Grainedprinted Colour Solid Pvc Frame (Single Rebated) Of Size 60Mm X 30Mm Made Out Of Solid Pvc Foam With Homogenous Fine Cellular Structure Having Smooth Outer Integral Skin With Suitable Metal Stiffner And Fixed With 100 X 8 Sheet Metal Csk Screws Complete All As Specified And As Shown On Drawing. (Note:- Door Frame Shall Bewater Proof, Termite Proof, Elegant And Should Have Excellent Screws Holding Strength To Fix Hinges And Holddoors Properly For A Long Life) All As Specified And Directed By Engr-In-Charge , Sliding Bolt - S&F Aluminium Sliding Bolt With Hasp, Staple Cast Type Anodized Of 200 Mm Size All As Specified , Handle - S&F Aluminium Handles Cast Type Anodized Of 150 Mm Size All As Specified , Tower Bolt - S&F Aluminium Tower Bolt Cast Type Anodized Of 150 Mm Size All As Specified , Hinges - S&F 100 Mm Size Stainless Steel Hingescomplete All As Specified & Directed. , Surface Dressing - Surface Dressing N.Exc 15Cm Deepin Hard /Dense Soil All As Specified. , Removal Soil - Removing Of Excavated Material N.Exc 50 Mtr And Depositing Where Directed At A Level N. Exc 1.5M Above The Starting Point All As Specified. , Pcc 1:4:8 - M&L For Pcc1:4:8 Type D-2 (40Mm Graded Aggregate) As In Foundation Mass Concrete Etc All As Specified. , Brick Work - M & L Brick Work Using Sub Class B Bricks Curved Or Straight In Plan Exc 6 Mtr Mean Radius In Cm (1:4) , Rendering_2 - M&L 15Mm Thick Rendering On Stone Masonry / Brick Surface In Cm 1:4 To Finished Even And Fair , Hard Core - M&L For Hard Core Ofbroken Stone / Boulder Gauge Not Exc 63Mm And Consolidated Thickness 15Cm Spreading, Levelling And Rolling Complete. , Pcc Floor - M&L 100 Mm Thick Pcc 1:4:8 Type D-2 Using 40 Mm Graded Stone Aggregate As In Sub Base Of Floor Finishedcomplete All As Specified. , Pcc 1:2:4 - M&L For Plain Cement Concrete1:2:4 Type B-2 Using 40Mm Graded Crushed Stone Aggregate As In 100 Mm Thick Hard Standing With Using Of Glass Strips For Between Slabs, Surface Finished Even And Smooth Without Using Extra Cement All As Specified And Directed. , Cement Base Paint - M&L For Preparation Of New Plastered Surfaces And Applying Two Coats Of Cement Base Paint On Walls Over A Coat Of Alkali Resistant Priming Paint All As Specified. , Window Awning - M&L For Window Awnings (Rain Canopy Fabric Material Mentioned As Per Below) To Be Fixed With Screws And Washers To Existing Awning Frames On Windows All As Specified And Directed By Engr-In-Charge.Materials: (A) Fabric Of Dickson(Made In France) (B)Fabric Type Acrylic (C)Fabric Colour Block Red (D)Fabric Code D-335 (E)Fabric Installation With Screw And Washer (F)Pvc Binding Off-White Colourwarranty:(A) Fabric Warranty 10 Years.(B) Fabric Stitching Warranty 3-Years , Demolition Chowkhat - Taking Down Chowkhats Or Frames Exc 1.5 Sq. M But N Exc 4 Sq M Each With Shutters (Without Taking Off Shutters From The Frames) Etc All As Specified . , Aluminium Window - M&L For Powder Coated Anodised Aluminium Sliding Window & Ventilator In Two Track Of Size Of Track Frame 63.50 X 38.5 X 2.0 Mm Thick Fixed On A Powder Coated And Aluminium Window Frame Of Size 63.5 X 46 X 2 Mm And Aluminium Shutters (2Mm Thick Of Aluminium Material) Including Provision Of5.5 Mm Thick Tinted Glass Fixed With Powder Coated Aluminium Snap And Rubber Beading.Stainless Steel Wire Mesh Of 0.36 Mm Dia With Aperture Of 1.40Mm Fixed With Aluminium F Chanalall Complete As Directed By Engr-In-Charge. Note.(A) Stainless Steel Wire Mesh Of 0.36 Mm Dia With Aperture Of 1.40Mm Fixed With Aluminium F Chanal(B)Aluminium Anodised Spring To Be Locking Device 02 Nos Of 100 Mm Long In Each Window.(C)Aluminium Eye Hook/Stopper In Each Leaf. (D)Amininium Anodised Handle 02 Nos In Each Window 100Mm Size.(E)Aluminium Grills To Be Measured Seperatly. , Aluminium Grill - S&F Powder Coatedaluminium Anodized Grill Of 6/7 Mm Dia Rod Square, Rectangular, Circular Or Similar Type Of Shape, Fixed With Channel 38 Mm X 12 Mm X 1.30 Mm (Sec No 8778) All As Specified.Make :- Decorel. , Pcc_2 - M & L For Pcc 1:2:4, 12.5 Mm Aggregate For Filling In Cills, Lintel, And Hold Fast Etc. , Paint Obd - M&L For Preperation Of New Plastered Surface And Applying Two Coats Of Oil Bound Distemper On Walls Over A Coat Of 3 Mm Thick Wall Care Putty All As Specified. Total Quantity : 1. Last date of submission for this tender is 2021-11-22. This is a Wrenches And Drivers tender in null, Delhi