Department Of Law And Legislative Affairs

Department Of Law And Legislative Affairs has published Bids Are Invited For Repair, Maintenance, And Installation Of Plant/ Systems/Equipments (Version 2) - Office Space; Supply Installation And Commissioning Of Fixtures And Devices With Accessories; Bidder -Providing Compactors Made Out Of 0.8Mm Thick Crca Steel Conforming To Is: 513 Gr. D Each Unit Have 4 Loading Levelsformed By 3 Nos . Adjustable Shelves . Body Units Are Bolted To Under Carriage. Optimizer Height Form Ground Is 2080 Mm (1980 Body + 65 Undercarriage +35 Channel System) The Body I /C Shelves Are Given Antirust Surface Treatment & Are Powder Coated With Epoxy Polyester Powder. It Involvestreatment Consisting Of Hot Water Rinse. Knock Of Degreasing, Cold-Water Rinse, Phosphating, Coldwater Rinse, Passivation & Dry Off Oven Treatment. Final Finish Consists Of Epoxy Polyester Powder Coating Of Approved Color & Shade With A Dry Film Thickness Of Minimum 40 Microns. The Testing Of Paint Is Done For Various Physical & Chemical Properties As Per Is: 101. The Material Is The Oven Backed With A Controlled Temperature Of 180 Deg. C . To 200 Deg . C. It Is Made Of 0.8 Mm Thick Crca Steel Conforming Is Is : 513 Gr . D Or Dd Its Max Load Bearing Capacity Is 80 Kg Uniformly Distributed Per Shelves Are Mounted On Support Bracket & Shelf Level Can Be Adjusted At Approx.… 25.4 Pitch . There Are 3 Adjustable Shelves Per Body Given Per Body Given 4 Loading Levels , If Bi Cradle Pair Is Provided The Under Carrying Is A Welded Frame Made Of Hr Sheet 3.15 Mm Thick Conforming To Is : 10748 Suitably Fabricated To Take The Loads Based On Configuration. A Centralized Locking Arrangement Is Provided Through Locking Stiffener Mounted On To Back Of Single Last Unit So That It Gets Locked On Channels When All The Units Are Brought Together.. Last date of submission for this tender is 2026-03-12. This is a Mechanical Engineering Service tender in Delhi, Delhi