National Mineral Development Corporation Limited

National Mineral Development Corporation Limited has published Bids Are Invited For Tools For Lathe & Milling Machine Total Quantity : 562; 1 1600233329 INSERT TURNING CNMG19061 4325 ISO CNMG1 INSERT TYPE:TURNING CNMG190612 GRADE:4325 ISO CNMG190 6 ADDITIONAL INFORMATION:TURNING INSERT CNMG190612 NOS 60 2 1600233146 TURNING TOOLHOLDER PCLNR2525M12 IS 14863 TURNING TOOLHOLDER DESIGNATION:PCLNR2525M12 IS STANDARD: IS 14863:2000 NOS 4 3 1600233144 TURNING TOOLHOLDER PCLNR3232P19 IS1486:2 TURNING TOOLHOLDER DESIGNATION:PCLNR3232P19 IS STANDARD:IS1486:2000 ADDITIONAL INFORMATION: TURNING TOOL HOLDER PCLNR3232P19 SUITABLE INSERT TYPE-CNMG & TOOL HOLDER WIDTH ,HEIGHT 32MM NOS 2 4 1600233848 FACING TOOLHOLDER PSSNP2521M12 IS14863:2 FACING TOOLHOLDER DESIGNATION:PSSNP2521M12 IS STANDARD:IS14863:2000 ADDITIONAL INFORMATION: FACING TOOL HOLDER FOR INSERT TYPE- SNMG & IS-PSSNP2520M12 NOS 2 5 1600233847 FACING TOOLHOLDER PSDNN2020K12 IS14863:2 FACING TOOLHOLDER DESIGNATION:PSDNN2020K12 IS STANDARD:IS14863:2000 ADDITIONAL INFORMATION:FACING TOOL HOLDER FOR INSERT TYPE- SNMG & IS-PSDNN2020K12 NOS 2 6 1600233109 HSS TOOL BIT 1/2 1/2 IS11143-194 HSS TOOL BIT HEIGHT OF TOOL:1/2 WIDTH OF TOOL:1/2 IS STANDARD:IS11143-194 LENGTH OF TOOL:4 ADDITIONAL INFORMATION:HSS TOOL BIT FOR TURNING AND SLOTTING ,HEIGHT AND WIDTH OF TOOL-1/2 NOS 10 7 1600235722 HSS TOOL BIT 3/8 3/8 IS11143-1984 HSS TOOL BIT HEIGHT OF TOOL:3/8 WIDTH OF TOOL:3/8 IS STANDARD:IS11143-1984 LENGTH OF TOOL:4 ADDITIONAL INFORMATION:HSS TOOL BIT FOR TURNING AND SLOTTING HEIGHT AND WIDTH -3/8 NOS 10 8 1600233551 HSS TOOL BIT 5/8 5/8 IS11143-1984 HSS TOOL BIT HEIGHT OF TOOL:5/8 WIDTH OF TOOL:5/8 ISSTANDARD:IS11143-1984 LENGTH OF TOOL:4 ADDITIONAL INFORMATION:HSS TOOLBIT FOR TURNING AND SLOTTING HEIGHT AND WIDTH -5/8 NOS 10 9 1600233318 HSS TOOL BIT 4MM 4MM IS11143-1984 HSS TOOL BIT HEIGHT OF TOOL:4MM WIDTH OF TOOL:4MM IS STANDARD:IS11143-1984 LENGTH OF TOOL: 100MM ADDITIONAL INFORMATION:HSS TOOL BITFOR TURNING AND SLOTTING HEIGHT AND WIDTH 4MM NOS 10 10 1600233316 HSS TOOL BIT 8MM 8MM IS11143-1984 HSS TOOL BIT HEIGHT OF TOOL:8MM WIDTH OF TOOL:8MM IS STANDARD:IS11143-1984 LENGTH OF TOOL:100 ADDITIONAL INFORMATION:HSS TOOL BIT FOR TURNING AND SLOTTING, HEIGHT AND WIDTH -8MM NOS 10 11 1600233314 HSS TOOL BIT 10MM 10MM IS11143-1984 HSS TOOL BIT HEIGHT OF TOOL:10MM WIDTH OF TOOL:10MM IS STANDARD:IS11143-1984 LENGTH OF TOOL: 100MM ADDITIONAL INFORMATION:HSS TOOL BIT FOR TURNING AND SLOTTING, HEIGHT AND WIDTH -10MM NOS 10 12 1600233311 HSS TOOL BIT 15MM 15MM IS11143-1984 HSS TOOL BIT HEIGHT OF TOOL:15MM WIDTH OF TOOL:15MM IS STANDARD:IS11143-1984 LENGTH OF TOOL: 100MM ADDITIONAL INFORMATION:HSS TOOL BIT FOR TURNING AND SLOTTING, HEIGHT AND WIDTH -15MM NOS 10 13 1600233308 HSS TOOL BIT 20MM 20MM IS11143-1984 HSS TOOL BIT HEIGHT OF TOOL:20MM WIDTH OF TOOL:20MM IS STANDARD:IS11143-1984 LENGTH OF TOOL:200MM ADDITIONAL INFORMATION:HSS TOOL BIT FOR TURNING, HEIGHT AND WIDTH -20MM NOS 10 14 1600233306 HSS TOOL BIT HOLDER 38 20 9.5X9.5X100 HSS TOOL BIT HOLDER HEIGHT OF TOOL HOLDER(MM):38 WIDTH OF TOOL HOLDER (MM):20 SIZE OF TOOL BIT (HEIGHTXWIDTHXLENGTH)MM:9.5X9.5X100 LENGTH OF TOOL HOLDER (MM):250 ADDITIONAL INFORMATION: HSS TOOL BIT HOLDER FOR TURNING AND SHAPING MACHINE SLOT SIZE(9.5X9.5)MM NOS 2 15 1600233831 GROOVING TOOL HOLDER 32 32 20 3 GROOVING TOOL HOLDER SHANK WIDTH(MM):32 SHANK HEIGHT(MM):32 CUTTING DEPTH MAX.(MM):20 INSERT WIDTH (MM):3 FUNCTIONAL LENGTH(MM):170 ADDITIONAL INFORMATION:GROOVING TOOL HOLDER FOR INSERT WIDTH 3 MM AND CUTTING DEPTH MAXIMUM 18.2MM, CLEARANCE ANGLE MAJOR 7 DEG. WITH CORNER RADIUS 0.3 MM NOS 2 16 1600233556 GROOVING TOOL HOLDER 32 32 25 4 GROOVING TOOL HOLDER SHANK WIDTH(MM):32 SHANK HEIGHT(MM):32 CUTTING DEPTH MAX.(MM):25 INSERT WIDTH (MM):4 FUNCTIONAL LENGTH(MM):170 ADDITIONAL INFORMATION:GROOVING TOOL HOLDER FOR INSERT WIDTH 4 MM AND CUTTING DEPTH MAXIMUM 23 MM, CLEARANCE ANGLE MAJOR 7 DEG. WITH CORNER RADIUS 0.3 MM NOS 2 17 1600233555 GROOVING TOOL HOLDER 25 25 15 2 GROOVING TOOL HOLDER SHANK WIDTH(MM):25 SHANK HEIGHT(MM):25 CUTTING DEPTH MAX.(MM):15 INSERT WIDTH (MM):2 FUNCTIONAL LENGTH(MM):150 ADDITIONAL INFORMATION:GROOVING TOOL HOLDER FOR INSERT WIDTH 2 MM AND CUTTING DEPTH MAXIMUM 19 MM, CLEARANCE ANGLE MAJOR 7 DEG. WITH CORNER RADIUS 0.2 MM NOS 2 18 1600233830 GROOVING INSERT 18.2 7 0.3 3 GROOVING INSERT CUTTING DEPTHH MAXIMUM (MM):18.2 CLEARANCE ANGLE MAJOR (DEGREE):7 CORNER RADIUS (MM):0.3 CUTTING WIDTH( MM):3 ADDITIONAL INFORMATION:GROOVING INSERT FOR GROOVING TOOL HOLDER INSERT WIDTH 3MM AND CUTTING DEPTH MAXIMUM 20MM NOS 20 19 1600233829 GROOVING INSERT 19 7 0.2 2 GROOVING INSERT CUTTING DEPTHH MAXIMUM (MM):19 CLEARANCE ANGLE MAJOR (DEGREE):7 CORNER RADIUS (MM):0.2 CUTTING WIDTH( MM):2 ADDITIONAL INFORMATION:GROOVING INSERT FOR GROOVING TOOL HOLDER INSERT WIDTH 2 MM AND CUTTING DEPTH MAXIMUM 19 MM NOS 20 20 1600233440 BALL NOSE END MILL CUTTER 5 25 64 BALL NOSE END MILL CUTTER DIAMETER OF TOOL(MM):5 CUTTING LENGTH(MM):25 OVERALL LENGTH(MM):64 MOC:HSS ADDITIONAL INFORMATION:BALL NOSE END MILL CUTTER WITH 4 FLUTE AND DIAMETER-5 MM, CUTTING LENGTH -25 MM,OVERALL LENGTH-64 MM NOS 2 21 1600233439 BALL NOSE END MILL CUTTER 6 28 76 BALL NOSE END MILL CUTTER DIAMETER OF TOOL(MM):6 CUTTING LENGTH(MM):28 OVERALL LENGTH(MM):76 MOC:HSS ADDITIONAL INFORMATION:BALL NOSE END MILL CUTTER WITH 4 FLUTE AND DIAMETER-6 MM, CUTTING LENGTH -28 MM,OVERALL LENGTH-76 MM NOS 2 22 1600233437 BALL NOSE END MILL CUTTER 10 32 76 BALL NOSE END MILL CUTTER DIAMETER OF TOOL(MM):10 CUTTING LENGTH(MM):32 OVERALL LENGTH(MM):76 MOC:HSS ADDITIONAL INFORMATION:BALL NOSE END MILL CUTTER WITH 4 FLUTE AND DIAMETER-10 MM, CUTTING LENGTH -32 MM,OVERALL LENGTH-76MM NOS 2 23 1600233436 BALL NOSE END MILL CUTTER 12 51 102 BALL NOSE END MILL CUTTER DIAMETER OF TOOL(MM):12 CUTTING LENGTH(MM):51 OVERALL LENGTH(MM):102 MOC:HSS ADDITIONAL INFORMATION:BALL NOSE END MILL CUTTER WITH 4 FLUTE AND DIAMETER-12 MM, CUTTING LENGTH -51 MM,OVERALL LENGTH-102MM NOS 2 24 1600233435 BALL NOSE END MILL CUTTER 16 57 127 BALL NOSE END MILL CUTTER DIAMETER OF TOOL(MM):16 CUTTING LENGTH(MM):57 OVERALL LENGTH(MM):127 MOC:HSS ADDITIONAL INFORMATION:BALL NOSE END MILL CUTTER WITH 4 FLUTE AND DIAMETER-16 MM, CUTTING LENGTH - 57MM,OVERALL LENGTH-127 MM NOS 2 25 1600234348 BORING TOOL HOLDER 25 23 30 10 CCMT 90 BORING TOOL HOLDER TOOL BODY DIAMETER (MM):25 MM SHANK HEIGHT( MM):23 MM FUNCTIONALLENGTH(MM):300 MM MAXIMUM BORE DIA.(MM):100 MM INSERT TYPE:CCMT CUTTING TOOL EDGE ANGLE (DEGREE):90 DEGREE ADDITIONAL INFORMATION: BORING BAR 25 MM FUNCTIONAL LENGTH-300 MM,FUNCTIONAL WIDTH-17 MM,MINIMUM OVERHANG-17 MM,TOOL CUTTING ANGLE-95 DEGREE,MAX OVERHANG -100 MM,MINIMUM BORE DIAMETER-32 MM,SHANK HEIGHT-23 MM,CONNECTION DIAMETER-25 MM FOR INSERT SPECIFICATION-CCMT INSCRIBED CIRCLE DIAMETER-12.7 MM,CORNER REDIUS-0.8 MM,CUTTING EDGE EFFECTIVE LENGTH-12 MM IN NOS 2 26 1600233312 PARTING TOOL HOLDER 32 32 20 3 PARTING TOOL HOLDER SHANK WIDTH(MM):32 SHANK HEIGHT(MM):32 CUTTING DEPTH MAX.(MM):20 INSERT WIDTH (MM):3 FUNCTIONAL LENGTH (MM):170ADDITIONAL INFORMATION:FUNCTIONAL WIDTH 33MM,FOR INSERT SPECIFICATION CLEARANCE ANGLE MAJOR 7 DEGREE,CUTTING DEPTH MAXIMUM 19MM,CORNER RADIUS 0.2MM, CUTTING WIDTH 3MM NOS 2. Last date of submission for this tender is 2026-03-05. This is a Raw Materials Processing Machinery tender in Bastar, Chhattisgarh