Municipal Corporation

Municipal Corporation has published Providing And Fixing Of Open Air Gym Equipments And Fitness Equipments In Various Parks Of Sector 34 Chandigarh Under Mayor Development Fund.- Providing and Fixing of Seated Pedal Trainer – LEG SHAPER complete in all respects having following specifications. na) All pipes should used in the equipments should be galvanised with 3mm thickness. nb) Multi Colour Powder coating with polyster paints should be used on all the equipments. nc) The foot pedal on all the equipments should be of aluminium only. nd) The seats should be made of high quality plastic with colour scheme in yellow or orange. ne) The high end bearings such as SKF/NBC must be used in all the equipments. n1 Dimensions- 1730*450*1450mm n2 Colour- customizable multi colour and complete powder coat n3 Size of main tube-114*3.75mm steel pipe n4 Size of supporting tube-76*3mm steel pipe n5 There is restrainer inside, the distance between swing arm and main tube is greater than 230mm avoiding the danger of getting stuck. n6 Al alloy protecting covers are used at the top other main tubes to protect from the rainwater n7 Anti-skid components are used at the pedal parts. n8 The distance between two spinners is no less than 230mm, avoiding the damage of being stuck n9 Anti theft cover is made by stainless steel/high quality plastic. n10 Thickness of bearing bracket is no less than8mm n11 Hazardous materials like coating agent, rubber are under national newest standard. nFunctions: Develops the strength of lower limbs, and improves the stability and agility of three main joints of lower limbs; good for the healing of inconvenience of bending and stretching of lower limbs, and muscular atrophy of lower limbs, rheumatoid arthritis, sciatica, sprain of the anklebone, etc. nApproaches: Sit on the chair and step on the footboard. Stretching legs with force and recover slowly. Repeat. nUsers: Suitable for people of different ages. nInstallation of Outdoor in cement concrete block of size 4’x3’x 1 ¼’ to the entire satisfaction of the Engineer-in-Charge n BI01010001010000000000000515BI0100001113 9 each 2 2 Providing and Fixing of Space Walker –. nSPACE WALKER complete in all respects having following specifications. na) All pipes should used in the equipments should be galvanised with 3mm thickness. nb) Multi Colour Powder coating with polyster paints should be used on all the equipments. nc) The foot pedal on all the equipments should be of aluminium only. nd) The seats should be made of high quality plastic with colour scheme in yellow or orange. ne) The high end bearings such as SKF/NBC must be used in all the equipments. n1 Dimensions- 1100*460*1480mm n2 Colour- customizable multi colour and complete powder coat n3 Size of main tube-114*3.75mm steel pipe n4 Size of supporting tube-38*3mm steel pipe n5 There is restrainer inside, swing lever is not more than 65degrees and having swing rod is made of 3mm steel tube. n6 Al alloy protecting covers are used at the top other main tubes to protect from the rainwater n7 Anti-skid components are used at the pedal parts, the resistance index is greater than 0.5mm n8 The distance between two pedals of the adjacent motion is no less than 100mm. n9 Anti theft cover is made by stainless steel/high quality plastic n10 The minimum height of the edge of swing component is not less than 80mm n11 Hazardous materials like coating agent, rubber are under national newest standard. n12 Radius of edge is no less than 3.0 mm. n13 The diameter of rotating shaft is not less than40mm nFunctions: The Leg & Thigh Exerciser provides excellent cardiovascular exercise while developing the leg muscles. Allows a full range of movement in the hip joint improving flexibility and strength, without any impact or stress to joints and back. Suitable for all ages. nApproaches: Hold the crossbeam with both hands and swing your legs backwards and forwards in a walking motion. nInstallation of Outdoor in cement concrete block of size 4’x3’x 1 ¼’ to the entire satisfaction of the Engineer-in-Charge n 9 each . Last date of submission for this tender is 2021-03-16. This is a Gym Equipment tender in Executive Engineer Hort Divn No 2 M C Chd, Chandigarh